Buying a new fitness tracker is always a surge of enthusiasm, but a first collision with the device can be confusing, especially if you take the Xiaomi Band 4 out of the box for the first time. Many users mistakenly believe that the gadget will turn on as soon as they remove it from the package, but modern technology requires initial activation via a smartphone.
The process of launching Xiaomi Mi Band 4 does not require complex manipulation of buttons, since they do not physically exist on the device body. The whole logic of the work is tied to the capacitive sensor and the software that controls all the functions of the gadget. You only need a few minutes of free time and a charged smartphone with a synchronization application installed.
In this article, we will discuss all the steps of activation, from checking the configuration to the first successful turn on the screen, and we will touch on important nuances that will help to avoid common errors and quickly adjust personal notifications to suit your needs.
Initial inspection and launch preparation
Before you try to activate the tracker, you need to make sure that it is basic operability and readiness to pair. Battery charge is the first thing to take care of, as factory charge is often minimal or completely absent after long storage. Connect the tracker capsule to the charger using a special cable from the kit, and wait for the battery icon to appear on the screen.
It is important to understand that the Xiaomi Band 4 does not have a separate physical power button, so all control is through the touchpad. If after connecting to charging the screen does not light up for 10-15 minutes, do not panic - lithium polymer batteries sometimes require "rocking". Leave the device on charging for an hour, pre-wiping the contacts on the back with dry cloth for a better connection.
⚠️ Warning: Do not use powerful Quick Charges from smartphones (Power Delivery) as they can damage the tracker's power controller. USB-cable to the computer port or use an adapter with a current of 1A.
In parallel with charging the device, you need to prepare the software environment on your mobile phone. To fully work the fitness bracelet will require the installation of an official application that acts as a bridge between the gadget and the smartphone operating system. Without this software, turning the device on will be impossible, since it is the application that gives the command to activate the main modules.
☑️ Preparing Xiaomi Band 4 for work
Installation and configuration of the synchronization application
A key element of the Xiaomi ecosystem is the app that manages all the settings of the tracker.At the moment, the main application for working with the Mi Band 4 is Zepp Life (formerly known as Mi Fit), although some users continue to use older versions of the software.
Once installed, you will need to register for an account or log in through an existing Xiaomi, Google or Facebook profile, a step that is mandatory since all health, activity and settings data is stored in the cloud and linked to your account.
When you register, pay attention to the permissions you request. To get your fitness tracker to work properly, the app needs access to geolocation, Bluetooth, notifications, and background work. If you block any of these settings, sync may be interrupted and notifications from messengers will no longer come to your wrist.
- 📱 Download the Zepp Life app from your platform’s official app store.
- 📝 Register by providing an email and coming up with a strong password.
- 🔒 Provide all requested permissions for stable Bluetooth communications.
- 🌍 Select a region (usually automatically determined, but it is better to check it out).
💡
When registering, specify real data (weight, height, age), as on their basis, the application algorithms calculate calorie consumption and activity recommendations.
Activation process and first screen switching on
The moment Xiaomi Band 4 is turned on automatically during pairing with the phone. Once you add the device in the app, the tracker will receive an activation signal and its screen will light up, greeting you with the Mi logo. Until then, the display can remain black even if the device is charged, which is a normal protective function of the transportation mode.
To begin pairing, open the Zepp Life app, go to profile and click Add Device. Select Band from the list, then Mi Band 4. The app will start searching for nearby devices, at which point a vibration signal and a numerical confirmation code may appear on the bracelet screen.
If the code on the smartphone and tracker screen matches, press the confirmation button on the touchpad of the bracelet (light finger touch). Once successfully connected, the tracker interface is fully unlocked, and you can flip through the menu, changing the dials and checking the settings, and now the device is ready for full use and data collection.
⚠️ Warning: If the code doesn't appear during pairing or the bracelet doesn't respond to touch, try restarting your smartphone and repeating the search procedure. Keep the bracelet and phone no more than 1 meter apart.
Problem Solving: Bracelet not turning on or not responding
The situation when Xiaomi Band 4 does not turn on even after connecting to charging, is rare, but has its causes. Most often the problem lies in the oxidation of contacts or deep battery discharge. If the charge indicator does not light up, carefully wipe the golden contacts on the back of the capsule and on the charger with an alcohol napkin or eraser.
Sometimes a software failure can cause a device to freeze when it doesn't respond to either charging or touching, in which case the cold reset method helps. Leave the tracker on charging for a few hours (preferably overnight), even if the screen remains black. Often, after setting the minimum charge, the device wakes up on its own and starts the system.
If software methods don't help, it might be a hardware malfunction, such as a battery failure or a screen plume, in which case self-repairing electronics is difficult because of the monolithic design of the capsule, and it is better to contact a service center or replace the device under warranty.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| Black screen, no vibration. | Deep battery discharge | Leave on charging for 2-3 hours |
| The battery icon appears and goes out. | Low charge or poor contact | Wipe your contacts, change your contacts. USB-port |
| The bracelet vibrates, but the screen does not burn. | Display or plume malfunction | Diagnostics are required in the service |
| Not connecting to the phone. | Bluetooth or software error | Remove the device from Bluetooth, reset the settings |
Secret resetting settings
Configure the main functions after inclusion
Once you've successfully turned on and paired, you'll have a wide range of settings that turn a simple pedometer into a smart assistant, and you'll want to set activity targets like step counts, pulse zones, and motion reminders that are individual and depend on your lifestyle and health.
Special attention should be paid to the setting of notifications. Xiaomi Band 4 allows you to display messages from social networks, calls and SMS. In the Zepp Life application, in the Profile section -> Mi Band 4 -> Application Notifications, you can select specific programs that you want to see notifications from on your wrist, this helps to stay informed without taking your phone out of your pocket.
Also important is adjusting the wrist lift to turn on the screen. You can choose the sensitivity of the sensor and time intervals when this feature is active (for example, only during the day or around the clock).
- ⌚ Set up your dial: choose one of the many designs available or upload your photo.
- 🔔 Filter notifications by leaving only the most important apps.
- 🏃 Set realistic goals in steps and calories for motivation.
- 💤 Activate sleep monitoring to analyze rest phases.
💡
Proper initial setup of notifications and activity goals is critical to making the bracelet comfortable in the long run.
Frequent User Questions and Answers (FAQ)
Despite the simplicity of the device, users often have specific questions regarding the operation of the Xiaomi Band 4. Below we have collected answers to the most popular of them so that you can quickly find the information you need without searching the Internet.