Modern fitness trackers have become full-fledged smart companions, and Xiaomi Mi Band 6 is no exception. One of the most popular widgets on the device’s screen is the display of current weather, which allows you to instantly assess the situation outside the window without taking your smartphone out of your pocket. However, users often face a situation when after the initial installation, the tracker stops updating meteorological data, showing yesterday’s information or dashboards.
The problem is not hardware failure, but the specifics of software synchronization algorithms between the bracelet and the mobile phone. To work properly, you need to perform a number of settings in the Mi Fitness or Zepp Life application, as well as make sure that the operating system resolutions are correct. In this article, we will discuss in detail all configuration stages, forced updates and methods for solving common errors.
The principle of operation of the weather widget
It's important to understand that the fitness bracelet itself doesn't have a GPS module or an Internet connection to independently obtain climate data. All information comes exclusively from a smartphone that has a Bluetooth Low Energy connection to it. The companion app acts as an intermediary that downloads data from the network and transmits it to a wearable device.
If you notice that the information on the screen is irrelevant, it means a data chain disruption. Most often, the lock occurs at the level of the Android or iOS operating system, which, in order to save battery power, freeze the background processes of the application. Without regular "ping" from the phone, the bracelet continues to display the last values stored in memory.
💡
For accurate positioning and correct weather data, make sure that geolocation (GPS) is enabled in your phone settings, even if you are in the same city.
Also, consider that the weather widget on the Mi Band 6 is a dynamic interface element that only updates when the bracelet is in sleep mode or far from the phone, the data will not be updated.
Primary configuration via the Zepp Life app
The process of activating the widget starts with a mobile app. Whether you're using the global version of Mi Fitness or the classic Zepp Life (formerly Mi Fit), the logic of the action remains the same. The first step is to make sure that your phone is connected to the Internet and Bluetooth is activated.
Go to the profile management section where you can see the list of connected devices. Find your Mi Band 6 and go to the display settings menu. Here is the option "Widget settings" or "Display" where you can change the order of the elements on the tracker screen.
- 📱 Open the application and go to the device profile.
- ⚙️ Select "Widget Settings" in the tracker menu.
- ☀️ Find the Weather icon and click on it to activate it.
- ✅ Make sure the switch is in the "On" position".
Once you turn on the option in the app, you have to wait until you sync, which usually takes 10 to 30 seconds. If the data doesn't show up automatically, try manually pulling the screen down in the main menu of the app to force you to update the status.
☑️ Checking the widget settings
Configuration in the Mi Fitness app
For new users of the Xiaomi ecosystem, Mi Fitness can be available, which gradually replaces older utilities. The interface here looks more modern, but the principle of configuration remains the same.
In the device menu, find the "Screen settings" or "Widget management" section. Here you will see a list of all available dials and information blocks. Weather is usually located at the top of the list of available widgets. If it is not in the active list, you need to drag it from the "Available widgets" section.
Special attention should be paid to localization settings. In rare cases, the application may misidentify the region, which will result in displaying the temperature in Fahrenheit instead of Celsius or showing the weather for another city.
⚠️ Note: If you change your region of residence, the weather data will not automatically update, you need to manually change the city in the widget settings or reset the device and add it again.
Mi Fitness also has a feature called Auto Weather Update, which sometimes needs to be activated separately, so make sure that the app settings check the box to automatically download weather data when you open the program.
Setup of permits and background work
The most common reason why the weather stops updating is the operating system’s aggressive energy saving policies. Android and iOS are seeking to maximize battery life by disabling the background processes of sleeper apps.
Go to your smartphone settings, look for the Apps section, and select Zepp Life or Mi Fitness. From the Battery or Energy Saving menu, set "No Limits" or "No Limits" mode, which will allow the app to work in the background and transmit data to the bracelet even when the phone screen is off.
Also, check the permissions to access geolocation. Apps require location access to work properly on the weather widget. It is recommended to choose Always or When using the app, but with the exact location option enabled.
| Parameter | Recommended value | Impact on work |
|---|---|---|
| Background work | No restrictions. | High (critically) |
| Geolocation | Always / Exactly | High. |
| Auto-start | Permitted. | Average. |
| Notifications | Permitted. | Low. |
Remember that after the phone’s operating system is updated, the permission settings may reset to the standard, in which case the setup procedure will have to be repeated.
💡
Without permission for background work and precise geolocation, the weather widget on the Mi Band 6 will not work, as the application will not be able to get current data.
Problems with localization and change of the region
Often users have difficulty changing time zones or moving to another city, and built-in algorithms don’t always have time to respond to the change of coordinates, especially if you’re roaming or using a VPN, in which cases data can be displayed to a previous location.
Some versions of applications can manually select a city to force a change of location, but a more reliable way is to clear the app's cache, which will force the app to re-query location data from the phone's system services.
If you use VPN-services, try to disable them at the time of synchronization. Weather servers can block requests from the IP-Addresses of known proxy services, considered suspicious, after successful widget update VPN back-up.
What if the widget shows the wrong city?
It’s also worth noting that some custom dials may have their own weather display settings. If you’ve set a third-party dial, check its description or settings in the theme setting app.
Resetting and reconnecting the device
In situations where software settings don't work, a radical but effective method is to completely reset and re-bind, which eliminates deep errors in the protocol between the phone and the wristband.
First, untie the device in the app. Don't just turn off Bluetooth, but delete the device from the list in the profile menu. Then reboot the smartphone and the bracelet. Only after you fully load the phone's system, do the search and pairing again.
- 🔄 Untie the bracelet in the application (Delete the device).
- 📱 Reboot your smartphone and fitness tracker.
- 🔗 Perform pairing again via Bluetooth.
- ☁️ Wait for full data synchronization (around) 1-2 minute).
During the reconfiguration process, the app will request all the necessary permissions, at which point it is important to keep a single request in mind and allow access to all features, especially geolocation and notifications.
⚠️ Warning: When uncoupling the device, the training data stored in the bracelet memory may be lost if it has not yet synced with the cloud. Make sure that the last workout is loaded into the application before resetting.