How to set up Xiaomi Air 2 Pro: from connectivity to thin settings

Introduction: Why customization is important for full use

Xiaomi Air 2 Pro is not just wireless headphones, but a multifunctional device with support for LDAC codec, active noise reduction (ANC) and adaptive sound. However, many users are limited to basic connectivity, missing up to 70% of the gadget’s capabilities. The right setup allows you to improve sound quality, extend battery life and even adapt control to specific scenarios – from sports training to listening to music in noisy rooms.

In this article, we will not only look at the standard steps (connecting to a smartphone, updating firmware), but also hidden features that are not mentioned in the official instructions, such as how to set up a double-touch to call a voice assistant or why some applications distort the sound when LDAC is activated. All instructions are tested on the latest firmware (2026) and are relevant for Android and iOS devices.

We'll focus on the challenges that Air 2 Pro owners face: a sudden switch off of one headphone, a low microphone volume when calling, or why the ANC is unstable in the subway, and for each case, we'll give you proven solutions, from resetting to manually calibrating the sensors.

Step 1: First connection and pairing with the device

The initial setup of the Xiaomi Air 2 Pro takes no more than 2-3 minutes, but there are nuances that affect the stability of the connection. First of all, make sure that your smartphone is enabled Bluetooth 5.0 or later – older versions may not support AAC and LDAC codecs, which will lead to a deterioration in sound. Also disable other wireless devices (fitness bracelets, speakers) to avoid interference.

To interface:

• 📱 Take the headphones out of the case – they will automatically go into search mode (the indicator on the case will flash white).
• 🔍 On your smartphone, open Settings → Bluetooth and select Mi True Wireless Earphones 2 Pro.
• ✅ Confirm the pairing, if requested. PIN-Enter 0000 (by default).
• 🎧 After connecting, check that both earbuds are identified as left (L) and right (R) – if one is missing, reset (instructions in the next section).

On Android devices (especially on Android devices) Xiaomi/Redmi/POCO) After the connection, a notification will appear about the possibility of installing the Mi Earphones branded application. Install it by all means - without this application, advanced settings are not available. ANC, Equalizer and firmware update.

Step 2: Install and configure the Mi Earphones app

Mi Earphones (available on Google Play and App Store) is the central tool for managing the Air 2 Pro.

• 🔄 Update the firmware of headphones (critical for bug fixing).
• 🎛️ Set up equalizer and modes ANC.
• 🔋 View the charge level of the case and headphones in real time.
• ⚙️ Reassign touch functions (for example, replace voice assistant call with track switching).

After installation of the annex:

1. Open Mi Earphones and allow access to Bluetooth and Notifications.
2. Click Connect the device – the app will automatically find Air 2 Pro.
3. In the main menu, check the firmware version (current for 2026 - 2.7.15 or later). If the version is outdated, update it through the Firmwer section.

Important: on iOS, some features are limited due to Apple's policy, for example, you can't update your firmware through an app - you'll need an Android device, and on iPhone, you don't display the charge level of your headphones in the status bar.

Step 3: Sound optimization: ANC, Transparent Mode and Equalizer

Xiaomi Air 2 Pro supports three noise reduction modes:

1. ANC (Active Noise Canceling) – suppresses low-frequency noise (engines, air conditioners).
2. Transparent mode – skips the surrounding sounds (useful on the street or in the office).
3. Turned off – natural sound without processing.

To set up the ANC:

1. In the Mi Earphones app, go to Sound Modes.
2. Select the ANC and adjust the intensity (from 1 to 10). For the subway or plane, the recommended level is 7-9, for the office - 3-5.
3. Activate Adaptive ANC – the headphones will automatically adjust to the level of external noise.

For fine tuning of sound, use the built-in equalizer:

• 🎵 Bass.+ — Higher frequency (suitable for hip-hop, electronic music).
• 🎶 High-pitched – accentuates vocals and instruments (ideal for rock music).
• 🔊 Custom – manual band setting (60Hz to 16kHz).

Step 4: Gesture management and reassignment of functions

By default, Air 2 Pro supports the following gestures:

• 👆 Double touch - playback / pause.
• 👇 Triple touch – Calling the voice assistant (Google) Assistant/Siri).
• 👈/👉 Retention – switching tracks (left/right headphone).

To reassign gestures:

1. In the Mi Earphones app, go to the Management.
2. Select an action (e.g., Double Touch).
3. Assign a new feature: Next track, Previous track, Turn off microphone or ANC Mode.

Tip: If you listen to podcasts often, triple-tapping the Volume Up feature is more convenient than getting your phone out. It's helpful for gamers to reassign retention to Low Delay Mode (reduces lag in games).

💡

If the headphones do not respond to touch, wipe the touch panels with an alcohol napkin - fat or moisture can block the operation.

Step 5: Solving Common Problems

Even after setting up the Xiaomi Air 2 Pro correctly, there may be failures. Let’s consider the typical cases and ways to fix them:

⚠️ Warning: If one of the headphones suddenly turns off or the sound is interrupted, check Settings → Bluetooth on a smartphone. Some manufacturers (such as Samsung) limit Bluetooth bandwidth to save power. disable Adaptive Battery Savings for the Air 2 Pro.

Problem 1: Low volume of microphone during calls.

• 🔊 Enable the voice improvement mode in the headphone settings (Calls section).
• 📱 On Android, open Settings → Annexes → Phone. → Permits and enable Microphone access for Mi Earphones.
• 🔄 Reconnect the headphones (forget the device in Bluetooth and pair again).

Problem 2: The sound is distorted when using LDAC.

• 🎵 Switch to codec. AAC (in the Bluetooth settings of the smartphone).
• 🔋 Charge headphones up to 50% or more with a low charge LDAC may work unstablely.
• 📴 Disable other Bluetooth-connected devices (they cause interference).

Problem 3: The headphones are quickly discharged.

• ⚡ Turn it off. ANC, When you don’t need it, it reduces your work time by 20-30%.
• 🔕 Reduce volume to 70% – maximum volume consumes the battery 1.5 times faster.
• 🔄 Update the firmware – in new versions optimized energy consumption.

💡

If problems persist after all manipulations, reset the headphones: place them in the case, press and hold the button on the case for 15 seconds until the indicator flashes red.

Step 6: Additional functions and life hacks

Xiaomi Air 2 Pro supports a few hidden features that few people know about:

• 🎮 Low Lag Mode – Reduces lag when watching videos or games, and is enabled in the Mi Earphones app (Game section) and reduces latency from 200 ms to 80-100 ms.
• 🔊 Monosound: If one earphone is dead, you can continue listening through the other. → monosound.
• 📡 Dual Connection – Headphones can be connected to two devices at the same time (for example, a smartphone and a laptop.
• 🔋 Fast charging -- 10 minutes in a case gives you up to 2 hours of playback. Use the original cable. USB-C maximum speed.

For customization enthusiasts, Mi Earphones allows you to set up automatic ANC shutdown when you remove one headphone, which is useful if you talk on the phone often without removing the headphones completely.

Lifehack for iOS: If you can’t update your iPhone, use a friend’s Android device or an emulator (like BlueStacks). After the update, your headphones will save the new firmware when you connect to your iPhone.

FAQ: Frequent questions about Xiaomi Air 2 Pro