Xiaomi’s modern wireless headphones have become a hit thanks to their affordable price and sound quality. Mi True Wireless Earphones 2 Basic (often abbreviated as Airdots 2) is no exception, but the process of their initial activation can raise questions for beginners. Proper pairing is the foundation of a stable device, and it is important to follow all the steps consistently to avoid channel dissynchronization.
Unlike wired headsets, there is no physical contact, and the entire process of communicating is through Bluetooth. Errors at the start can cause the phone to see only one earbud or the sound will be interrupted. In this article, we will discuss in detail the algorithm of actions for different operating systems, and also consider hidden features that will help improve the quality of communication.
Before starting the procedure, make sure that both headphones are in the charging case and have a sufficient level of charge. Indicators on the case should burn or flash, signaling readiness for operation. If the device is new, you may need to remove protective films from the charging contacts so that the headphones are turned on inside the case.
Preparation of headphones for the first turn on
The first step is to physically activate the headset. Often users forget that Xiaomi Mi True Wireless Earphones 2 Basic can be in deep sleep after long storage in stock. You need to remove both headphones from the case at the same time. If you take them out in turn, they may not enter pairing mode with each other, and the right channel will not be able to transmit the signal to the left.
Note the LED lights. When extracted from the case, they should catch fire. If this does not happen, check if the protective stickers from the charging contacts are removed. The contacts must be clean to allow current to pass and activate the device. In some cases, it requires a light pressing of the earphone in the case to "wake up."
💡
If the indicators do not light up after extraction, put the headphones back in the case on the 5-10 And then you take them out at the same time, and that'll restart the power controller.
It's important to understand the difference between standby and mating. Immediately after extraction, the headphones look for each other. Only after they synchronize with each other (usually one indicator flashes, the other goes off or flashes less often) do they become visible to external devices, a process that takes 3 to 10 seconds.
Matching with Android devices
Android provides the most extensive control options for Bluetooth devices. First, make sure that the wireless module is activated in your smartphone settings. Go to Settings → Bluetooth and turn on the switch. The phone will automatically search for available gadgets within range.
The list of available devices should be called Mi True Wireless EBs Basic or Mi True Wireless Earphones 2 Basic. Click on it to initiate a connection. At this point, a request for confirmation of pairing may appear - press "OK" or "Connect." A successful connection is usually accompanied by a voice message "Connected" in the headphones themselves.
☑️ Checklist of Android connection
It is worth noting that on Xiaomi smartphones with a shell MIUI Or HyperOS, you can connect almost instantly, thanks to protocol optimization, and if you have a phone from another brand, it can take a couple of seconds longer. PIN-code that is 0.0000 by default, but this model most often uses automatic pairing without a password.
Configure the connection on the iPhone (iOS)
Apple owners also have no trouble connecting the headset, although some specific features may not be available without third-party apps.The process starts similarly: open Settings on your iPhone and go to the Bluetooth section. Make sure the slider is activated and lit green.
Keep your headphones close to your smartphone. When you see a Mi True Wireless EBs Basic entry on the "Other Devices" list, tap it. iOS will request permission to pair. Once confirmed, you'll hear the characteristic connection sound.
⚠️ Note: On iOS devices, it is not possible to change the equalizer settings or reassign buttons through the standard menu. For full management of the functionality of Xiaomi Earbuds on the iPhone, it is recommended to use third-party applications from the App Store, since the official Mi Earbuds application may not be available or have limited functionality for this model.
If you don't have an automatic connection, try updating your Bluetooth page or rebooting your smartphone. Sometimes the Bluetooth cache in iOS gets overflowing and the new gadget just doesn't get detected. Once you pair it successfully, your iPhone will remember the device and connect to it automatically when you remove it from the case in the future.
Use of the Mi Earbuds app
To unlock the full potential of the headphones, Xiaomi has developed a special Mi Earbuds app that is available for Android and allows you to customize the device more deeply. Once you install the app and connect the headphones, launch it. The program will automatically detect the headset and suggest adding it to the list of devices.
In the app interface, you'll find information about the charge of each headphone separately, which is extremely convenient for monitoring the time of operation, and there's also a headphone search feature: if you lose one of them, the app will make it squeak loudly, which helps you find the device that fell behind the sofa or in the bag.
The secret function of the application
Another important feature is gesture control. Although basic settings are sometimes available through the system, the app gives you more flexibility, you can adjust the number of clicks to activate the voice assistant or switch tracks, changes take effect instantly and are stored in the memory of the headphones themselves.
Solving Connection and Desynchronization Problems
One of the most common problems is when the phone sees only one earbud, or the sound is only in one ear, which is called desynchronization. To fix this, you need to perform a full reset. First, remove the device from the Bluetooth list on the phone ("Forget the device").
Then place both earbuds in a case. Find the touch areas on both headphones (usually the bottom of the leg or logo). Press and hold the sensors on both earbuds simultaneously for 20-30 seconds until the indicators flash red and white (or orange) several times.
Once reset, the headphones will go back to factory condition, remove them from the case and re-pair the pairing procedure, as described at the beginning of the article, and it is important to reconnect them, since the old encryption keys on the phone will no longer work.
Technical specifications and compatibility
Xiaomi Mi True Wireless Earphones 2 Basic is based on the Realtek chip, which supports SBC and AAC protocols. This provides good sound quality on most modern smartphones. However, it is worth considering that the AAC codec works more stable on Apple devices, while Android can use different implementations of this codec.
The battery life on a single charge is about 4-5 hours, and the case allows you to charge the headphones several more times. The data transfer speed over Bluetooth 5.0 provides low latency, which is critical when watching videos or games. However, the distance between the phone and the headphones should not exceed 10 meters without obstacles.
| Parameter | Meaning | Note |
|---|---|---|
| Bluetooth version | 5.0 | Provides a stable connection |
| Codecs. | SBC, AAC | AAC is preferred for iOS |
| Moisture protection | IPX4 | Protection against splashes and sweat |
| Time to work. | ~4 hours | Excluding the charge from the case |
When choosing a sound source, consider that support for the AAC codec should be included in the Android developer settings if the sound quality does not suit you. By default, the system chooses the optimal codec, but manual settings sometimes increase in high-frequency detail.
Operation and care tips
In order for the headphones to last long and delight with high-quality sound, you need to monitor the cleanliness of the contact areas. Sweat and moisture can oxidize the contacts, which will lead to problems with charging and, as a result, with the inclusion.
💡
Regular cleaning of the speaker mesh from earwax prevents sound attenuation and protects the inner membrane from damage.
Don't leave your headphones and case in direct sunlight or in places with extremely low temperatures. Lithium polymer batteries are sensitive to overheating, which can shorten their lifespan or cause them to swell. The optimal storage temperature is room temperature.
⚠️ Warning: Do not use aggressive chemicals or alcohol to clean the headphone cases.This can damage the matte coating of the plastic and make the surface sticky or dull. Use only a slightly damp napkin.
If you plan to not use the headphones for a long time (more than a month), charge them to 60-70% and turn them off (if possible through a discharge), or simply store them in a cool place. Periodically, every 2-3 months, check the charge level and recharge the case so that the battery does not go into deep discharge.