Once you force the reset, your activity tracker becomes a blank slate, losing all previous steps, pulse and interface personalization data. Recovery of the Mi Band 4 requires a series of steps to make the gadget a full-fledged health monitoring assistant again. Many users mistakenly believe that the device will work immediately after turning on, but it requires re-attachment to the smartphone to fully work.
The re-initiation process takes only a few minutes if you clearly understand the logic of the bracelet operating system and mobile app. Xiaomi Mi Band 4 relies on a permanent connection to the phone to synchronize the time, notifications and dial settings. Without this key step, the device will remain in base mode with minimal functionality.
In this article, we'll take a look at every step, from getting your smartphone ready to fine-tuning your sensors, how to avoid common pairing errors and what to do if the system can't see the device. Complete data reset only happens after 10 seconds of holding the touch button in the bracelet settings menu. Let's bring your gadget back to life.
Preparation of the smartphone and the Mi Fit application
Before you try to connect the bracelet, you need to make sure that the software environment on your phone is ready to work. Often restore problems arise due to an outdated version of the application or conflicts in Bluetooth system services. Make sure that your device has the Mi Fit application (or Zepp Life, as the brand has been renamed) of the latest available version.
Go to your smartphone’s Bluetooth settings and find a list of previously paired devices, if there’s a record of the Mi Band 4, it needs to be deleted or forgotten, which is a critical step, as old encryption keys can block a new connection, creating the illusion of a successful connection that immediately breaks.
Also worth checking for permissions for the app. Android or iOS can block access to geolocation or background work, which is necessary for stable communication with wearable electronics. Open your phone's settings, find the app section, and make sure that Bluetooth and location are allowed for Mi Fit.
⚠️ Warning: Do not try to connect the bracelet directly through the standard Bluetooth menu of your phone settings.Pairing is only possible through the Mi Fit application interface, otherwise the device will not transmit health data.
The process of primary pairing of the device
After resetting on the screen, the bracelet will appear QR-This is the normal behavior of the system, you have to run the Mi Fit app on your smartphone and log in to your account. If you've previously used this account, all your historical data will be stored in the cloud and downloaded after you successfully connect.
In the main menu of the application, click on the Profile tab and select the option “Add device”. In the list of available gadgets, find the Mi Band 4. The application will go into search mode and begin scanning the ether. At this point, a vibration or a request for confirmation of pairing may appear on the bracelet screen.
Click the touch button to confirm the action. The confirmation code will appear on the smartphone screen — make sure the numbers on the phone and tracker match. Once confirmed, the synchronization process will begin, during which new dials or firmware updates can be downloaded to the bracelet.
☑️ Checklist of successful pairing
If the pairing is successful, the bracelet vibrates and the smartphone screen will display the status "Connected". Now your device is ready for basic use, but for maximum comfort, it is recommended to conduct additional calibration.
Customization of personalization and dials
Immediately after recovery, the Xiaomi Mi Band 4 uses standard settings that may not match your habits.The first thing to do is to set the time and date display, although they are usually synced automatically from your smartphone. Check the time format (12 or 24 hours) in the bracelet menu through the app.
Pay special attention to the dials. Once reset, the standard design returns, but you can choose any other one from the huge library. In the app, go to the device profile, select "Dial Settings" and download the option you like. This will not only improve the appearance, but can also add useful complications, such as steps or heart rate.
Don't forget to adjust the order of the cards you display. Swipe up, down, left and right, you move between functions. Leave in the main positions only what you use constantly: pulse, weather, notifications. Extra cards such as Settings or Sedentary Lifestyle, better to remove away or turn off, so as not to waste battery power on unnecessary actions.
Hidden possibilities of dials
Calibration of sensors and health monitoring
To accurately work the activity tracker, you need to re-enter your anthropometric data. Once reset, the calorie and distance algorithms may not work correctly if they use averages. Open a profile in the app and make sure your weight, height, age and gender are correct.
The pulse sensor also requires attention. After reset, the survey frequency can be set to a minimum or turned off, and it is recommended to set the "Continuous" mode or an interval of 10-30 minutes to build an accurate schedule of heart rate throughout the day, which is especially important for analyzing sleep phases and stress levels.
If you plan to use the bracelet for swimming, check the screen sensitivity settings in the wet state.Although the Mi Band 4 has 5 ATM protection, after reset, it is worth testing the touchscreen response to water droplets to exclude accidental pressing during workouts.
| Parameter | Recommended value | Impact on the battery |
|---|---|---|
| Pulse monitoring | Every 10-30 minutes | Average. |
| Notification of annexes | Only important. | Low. |
| Wrist lifting | Included (8:00-22:00) | Average. |
| Vibration of events | Included. | Low. |
Management of notifications and system functions
One of the main functions of the smart bracelet is to receive notifications. Once you restore, you will have to re-allow notifications for each application separately, go to the notification settings in the Mi Fit app and activate the desired messengers, social networks and system calls.
It's important to set the wrist lift function right. It activates the screen when you turn your hand. After reset, this function may be turned off or too aggressively, and it's optimal to set a time frame, like 8 a.m. to 10 p.m., so that the bracelet doesn't glow at night when you toss in your sleep.
Also check alarm settings and motion reminders. They don't automatically sync in the background as aggressively as time. Make sure your important alarms are set and marked as active, or you may be sleeping.
⚠️ Note: When you enable notifications for a new app (such as WhatsApp), be sure to allow notifications to be accessed in your system settings. Android/iOS, The bracelet will vibrate, but the screen will remain black.
💡
To ensure that notifications arrive stably, fix the Mi Fit application in the memory of the smartphone (lock in the list of running processes), preventing it from closing with the energy saving system.
Solving problems in recovery
Even if you follow all the instructions, you can have technical difficulties. The most common problem is that the phone sees the bracelet but can't complete the pairing. In this case, it helps to completely reboot both devices. Turn off the Bluetooth on the phone, turn off the bracelet (if there is one option on the menu or wait for the discharge), and start the process again.
If the bracelet doesn't respond to touch after reset, it may have been stuck in the initialization phase. Connect it to the charger for 5-10 minutes.The current supply often causes the Mi Band 4 microcontroller to reboot and exit the stupor state.
In rare cases, time is desynchronized. If you see a clock running away or lagging, try the app to force the sync by pulling the screen down for updates. If that doesn't help, remove the device from your profile and add it again as new.
💡
90% of connection problems are solved by completely removing the device from the Bluetooth list in the phone’s settings before trying to pair again.