How to connect wireless headphones Xiaomi: instructions for all models

Contents

• Introduction to Xiaomi wireless headphones
• Preparation for connection
• Connecting to an Android smartphone
• Interface with iPhone and iPad
• Setting up on a Windows PC
• Typical problem solving
• Features of different models
• Frequent questions

Xiaomi’s wireless headphones have become an integral part of the brand’s ecosystem, offering great value for money. From the budget Redmi AirDots to the premium Xiaomi Buds 4 Pro, each model requires the right connection to reveal all the features. This article will help you understand the nuances of pairing with different devices and avoid common mistakes.

The connection process may vary depending on the headphone model and the type of device (smartphone, tablet, computer).We will look at universal methods, as well as specific features for popular gadgets.

Previous articleModern Xiaomi models support Bluetooth technology 5.2/5.3, It's a stable connection, it's low power consumption, but it requires the right setup on the headphones and the connected device to work properly.

Preparation for connection: what to do before pairing

Before you first connect, you need to follow several important steps to ensure that the headphones work properly, and neglecting these actions often leads to problems with connection or sound.

First, check the charge of the headphones. Most Xiaomi models go on sale with a minimum charge level (about a halfway point). 30-50%). For full work, it is recommended to charge the case and the headphones themselves to 100%. The charge indicator is usually located on the front panel of the case:

• 🔴 Red/Orange – charge below 30%
• 🟡 Yellow is charge. 30-80%
• 🟢 Green is full charge.

Next, remove the headphones from the case, which will automatically put them in pairing mode (on most models), if the headphone indicators did not flash white/blue, then they were already paired with another device, in which case you will need to reset the settings.

⚠️ Note: Some models (e.g. Xiaomi Buds) 3 Pro) are protected against accidental pairing. To activate the search mode, it may be necessary to hold the button on the case 5-10 seconds before flashing the indicator.

Also make sure that on your device:

• 📱 Bluetooth enabled (in settings or through notification panel)
• 🔄 Disabled other wireless devices that may cause interference
• 📦 Installed the latest OS updates (especially relevant for Android 12)+ iOS 15+)

Charge the case and headphones to 100%|Remove headphones from the case for activation|Check the flashing of indicators (white/blue)|Disable other Bluetooth devices within a 10m radius|Update the OS on the connected device-->

Step-by-step: how to connect to an Android smartphone

Connection to Android devices (including Xiaomi, Redmi smartphones, POCO) It's done via the standard Bluetooth menu, but there are some nuances that can help you avoid problems with the sound or the microphone.

Step 1. Open the Settings. → Connected devices → Bluetooth (on) MIUI The path may be different: Settings → Activate Bluetooth if it's off.

Step 2: Remove the headphones from the case, and they should automatically appear in the list of available devices called Mi True Wireless Earphones, Redmi Buds 4 or similar, unless the name is displayed:

• 🔄 Reboot the headphones by putting them back in the case for 10 seconds, then pull them out again.
• 📱 Reboot your smartphone
• 🔌 Try connecting from another device to check the performance of the headphones.

Step 3. Click on the headphone name in the list. The pairing request will appear on the screen, confirm it. On some models (Xiaomi Buds) 3T Pro) additionally need to allow access to contacts and call history for microphone operation.

After a successful connection, the headphone icon will appear in the status bar, and in Bluetooth settings - additional options:

• 🎧 Sound profile (AAC/SBC/aptX — choose AAC for better quality on Android)
• 🔊 Volume level (separate adjustment for headphones)
• 📞 Priority of microphone (important for calls)

💡

If the audio is interrupted after you connect, try turning off the Absolute Volume option in Bluetooth settings, which will solve the problem of volume incompatibility between devices.

Models with Xiaomi HyperSync support (such as Buds 4 Pro) require the installation of the Mi Earphones app from Google Play. Without it, noise reduction and gesture customization functions will not work.

Interface with iPhone and iPad: features and limitations

While Xiaomi’s headphones are optimized for Android, they can be connected to Apple devices, but some features (such as touch controls or firmware) may not work properly.

Connection algorithm:

1. Open Settings → Bluetooth on iPhone/iPad.
2. Take the headphones out of the case and wait for their name to appear in the list of Other devices.
3. Click on the headphone name and confirm the pairing.

On Apple devices, Xiaomi headphones will appear as a standard audio device without additional settings.

• ❌ No way to adjust gestures (double touch, hold)
• ❌ The Mi Earphones app does not work.
• ✅ Basic control: playback / pause, answering calls
• ✅ Codec is supported AAC (opportune)

⚠️ Note: On iPhone headphones Xiaomi can automatically connect in the mode "Phone call" (HFP), To correct this, when listening to music, call the control panel and manually select the headphones in the Playback Control section.

For models with active noise cancellation (ANC) On iOS, you'll have to use third-party apps like HeyMelody (available on the App Store) that allow you to turn on/off. ANC, They do not have complete control over the settings.

Smartphone Xiaomi/Redmi/POCO|Another Android smartphone|iPhone/iPad|Laptop/PC on Windows|Other-->

Connecting to a Windows PC 10/11: fixing driver problems

Connecting Xiaomi wireless headphones to your computer is often accompanied by problems with drivers or codec. Consider a step-by-step instruction for stable operation.

Step 1. Turn Bluetooth on your PC:

• Press Win + I, select Devices → Bluetooth and other devices.
• Activate the Bluetooth switch.
• Click Add Add the device → Bluetooth.

Step 2: Take the headphones out of the case and wait until they appear on the list of available devices.

• 🔄 Reboot your Bluetooth adapter (via Device Manager).
• 🖥️ Update Bluetooth drivers (download from the laptop or chipset manufacturer’s website).
• 🔌 Try connecting through another. USB-port (if an external Bluetooth adapter is used).

Once successfully connected, the headphones will appear in the list of audio devices, but for sound to work properly, you need to:

1. Right-click on the volume icon in the tray, select Open sound parameters.
2. In the Withdrawal section, select your Xiaomi headphones.
3. Press the device properties and set the sound format 16 bits, 44100 Hz (optimum for most models).

💡

For stable work on a PC, it is recommended to use an external Bluetooth adapter with Bluetooth 5.0 support (for example, TP-Link). UB500), If the built-in module is older than 2018.

Typical Problem Solving: What to Do If Headphones Don't Connect

Even if you do the right thing, users often encounter pairing errors, and let's look at the most common problems and how to fix them.

1. Headphones are not detectable by the device

If the headphones do not appear in the list of available devices:

• 🔋 Check the charge of the case and headphones (the indicator should flash when extracted).
• 🔄 Reset the headphone settings: put them in the case, then hold the button on the case 15-20 seconds before flashing red/white.
• 📱 Reboot Bluetooth on your smartphone (turn off/on in settings).
• 🚫 Make sure the headphones are not connected to another device (e.g. a laptop).

2.The connection is passing, but there is no sound

The reasons may be different:

• 🎵 Headphones are connected in the mode Only microphone (HFP). Reconnect them and select a profile A2DP.
• 🔊 The volume on the headphones is set to a minimum. Use the physical buttons on the headphones to adjust.
• 📱 On Android, check if No Sound or Do Not Disturb is activated.

3.The headphones are constantly switched off

A common problem on older smartphones or PCs:

• 🔋 Discharged headphone battery (charge to 100%).
• 📶 Weak Bluetooth signal (reduce device distance, remove obstacles).
• 🖥️ On Windows, turn off power saving for Bluetooth in Device Manager.
• 📱 On Android, disable the Adaptive Battery for Headphones feature in the app settings.

⚠️ Note: If after updating the firmware of the smartphone (MIUI 14+) The headphones stopped working properly, try removing them from the list of associated devices and reconnecting them. Sometimes it helps to roll back to the previous version of the firmware through Settings. → The phone. → System update (three dots in upper right corner) → Update package).

Features of connection for different models Xiaomi

Each Xiaomi wireless headphone series has unique connectivity features. Let's look at the most popular models and their nuances.

1. Redmi AirDots Series (1-5 generation)

Budget models with basic functionality:

• 🎧 Supports codec. SBC (no AAC/aptX).
• 🔋 Working time: up to 4 hours on one charge, 12 hours with a case.
• 📱 To connect, you need to remove both headphones from the case (no mono mode).
• 🔄 Reset: Hold the button on the case for 10 seconds until flashing red/white.

2. Xiaomi Mi True Wireless Earphones 2 / 2S

Semi-professional headphones with improved sound:

• 🎵 Codec support AAC (best quality Android/iOS).
• 📱 Requires installation of Mi Earphones app to customize gestures.

3. Xiaomi Buds 3/3T/4 Pro

Flagship models with ANC and LDAC:

• 🎧 Support LDAC (Hi-Res Audio on Android 8+).
• 📱 Mi Earphones app is required for customization ANC gesture.

4. Xiaomi FlipBuds Pro

Headphones with flexible "ears" and premium sound:

For all models it is relevant:

• 📦 Updates to the firmware come through the Mi Earphones app (available only on Android).
• 🔄 After updating the firmware may need to re-pair.
• 🎧 For a mono-connection (one earphone), you usually need to first connect both, then put the second in the case.

Frequent questions about connecting Xiaomi headphones