How to undo headphones Xiaomi AirDots: 5 working ways + error solving

Xiaomi AirDots wireless headphones (including the Pro, Pro 2, 3, S, and SE models) have long been a hit with users due to a combination of price, sound quality and convenience. But even with such popular gadgets, there are periodic problems with the first connection or reconnection after a reset. If your headphones do not connect to the phone, flash white / red, are not identified in the list of devices or one of the headphones does not work – this article will help you understand the causes and eliminate them in 5-10 minutes.

We tested all the current ways to connect on Android 12-14 and iOS 15-17, and collected typical user errors (for example, when the headphones connect only one or permanently turn off), at the end of the article – FAQ with answers to frequent questions and the AirDots compatibility table with different devices.

1. Headphone preparation for connection: what to check before connection

Before you try to connect Xiaomi AirDots to your phone, make sure the headphones themselves are ready to pair. Often the problem lies in basic things that users miss:

• 🔋 Headphone and case charge: if the indicator on the case does not burn or flashes red, charge the device for at least 10-15 minutes. AirDots Pro 2 and later requires at least 20% charge for a stable connection.
• 🎧 Headphone position in the case: they must be downward contacts (metal points on the headphones should touch the charging contacts in the case). If the headphone is lying crooked, it will not charge or turn on.
• 🔄 Resetting previous connections: If the headphones were already paired with another device, they need to be reset to factory settings (instruction below).
• 📱 Device compatibility: AirDots works with any Android 5.0 smartphone+ iOS 10+, But for full operation (for example, displaying the charge level) on Android you need to MIUI 10+ Mi Home app.

Pay special attention to the indicators on the case:

• 🟢 Green - Case Charge of over 50%.
• 🟡 Yellow/orange – charge from 20% to 50%.
• 🔴 Red charge less than 20% (urgent charge required).
• 🔄 Fast flashing white - the pairing mode is activated.

⚠️ Warning: If the indicator on the case does not burn at all, check the cable and power supply. Xiaomi AirDots do not support fast charging - use the original cable with the output 5V/1A.

2. Standard Android connection: step-by-step instructions

For most Xiaomi AirDots models, the process of connecting to Android is the same, but there are nuances for different versions of the firmware.

1. Remove the headphones from the case. They must automatically turn on (the white indicator on each earpiece flashes).
2. Activate Bluetooth on your phone: go to Settings → Connected Devices → Bluetooth (on MIUI) or Settings → Connections → Bluetooth (on Samsung).
3. Find the headphones in the list: they should show up as Mi AirDots Basic_R (Mi True Wireless Earphones (for Pro versions).
4. Click on the headphone name and confirm pairing. If you request access to contacts/microphones, let me.

After successful connection:

• 🎵 The headphones will sound a voice message "Connected" (in English).
• 📱 The phone will be notified "The device is connected".
• 🔋 In the status line MIUI The headphone charge level will be displayed (if supported).

If the headphones are not displayed in the list of devices:

⚠️ Note: Some phones (such as Samsung or OnePlus) may need to turn off power saving for Bluetooth. → Annexes → Bluetooth → Battery → Optimize and turn off optimization.

3. iPhone (iOS) connection: features and limitations

While Xiaomi AirDots isn’t certified for iPhones (like AirPods), they work perfectly with iOS, but with some limitations:

• ✅ Works: Bluetooth connection, music playback, call reception.
• ❌ Not working: displaying the charge level of the headphones in the status bar, automatic switching between Apple devices, the function “Find” (like AirPods).

Instructions for iPhone/iPad:

1. Open Settings → Bluetooth and make sure the switch is active.
2. Remove the headphones from the case – they should automatically go into pairing mode (blinking white light).
3. In the list of devices, find Mi AirDots... or LE... (for some models) and tap it.
4. Confirm the connection. The headphones will sound "Connected."

If AirDots connects but the sound is interrupted or one earphone is not working, try:

• 🔄 Reconnect the headphones (forget the device in Bluetooth settings and re-spoil).
• 📱 Disable "Low Energy Mode" in iPhone Settings.
• 🎧 Reset your headphones (see section about resetting).

💡

On the iPhone, the charge level of Xiaomi AirDots can be viewed through the Battery widget (scroll the screen left on the home screen).

4.How to reset Xiaomi AirDots to factory settings

If the headphones don't connect, malfunction or only connect one at a time, a complete reset will help.

Once reset, all previous connections will be removed, and the headphones will return to the factory settings, and they will have to be paired again with all devices.

5. Solving common connection problems

Even after successful pairing, users face typical problems.

🔴 One earphone does not work (does not connect or play sound)

Causes and solutions:

• 🔋 One earphone is discharged: put both in the case to charge, even if the indicator is on.
• 🎧 Headphones are not synchronized: Put both earphones in the case. Get the right one first, wait 5 seconds, then the left one. If it doesn't work, reset.

The Bluetooth problem on the phone

🔴 Headphones are connected, but the sound is interrupted or interference.

This is most often related to:

• 📶 Interference from other devices: Turn off Wi-Fi on your phone (if you don’t use it) – sometimes it interferes with Bluetooth.
• 🔄 Outdated headphone firmware: Update them through the Mi Home app (instruction below).
• 🎵 Incorrect codec: Go to Bluetooth Settings on Android → Settings of the gear next to AirDots → Audio codec and select SBC (stablest).