How to carefully pull Xiaomi watch out of the case: 5 proven ways

Xiaomi smartwatches are some of the most popular wearables on the market, but even with them, there are sometimes household difficulties. One of the most common problems is how to ineffectually pull and pull the body, trying to free the device from a tight-fitting case. Silicone, fabric or metal cases from the Mi Band 7, Xiaomi Watch S3 or Smart Band Pro often “stick” to the case, especially after prolonged wearing or getting moisture. In this article, we will examine all the working methods, from the simplest to the emergency, and also how to avoid damage to the screen.

It's important to understand that the design of the case attachment Xiaomi different from model to model. For example, the Mi Band more often uses snap sliders, and Xiaomi Watch straps with quick removable spring pins. If you try to remove the case for the first time, there is a high risk of breaking the locks or scratching the body. We collected instructions for all types of attachments, including the rare cases when the case "jammed" after falling or deforming.

1.Preparation: What to do before extraction

Before you start to force, check three key points:

• 🔍 Look at the case for visible latches or buttons. Most Xiaomi models have a small protrusion or indentation that indicates the mounting mechanism. 6/7 This is a side slot, and the Xiaomi Watch S2 — slap-button.
• 💧 Make sure the case is dry. Wet silicone or fabric can stick to the case, making it difficult. If the gadget has recently come into contact with water (shower, pool), dry it for 10-15 minutes.
• 📏 Check the compatibility of the case and model. Sometimes users buy accessories "by eye", and they are incompatible in size. For example, the case for the Mi Band 5 is not suitable for the Mi Band 8 due to the changed shape of the body.

If the case is not original, the chances of complexity increase significantly, because cheap silicone or plastic accessories often have inaccurate cut-outs under buttons or sensors, which leads to a spell, in which case you will have to act carefully so as not to damage the device itself.

⚠️ Note: Do not use knives, scissors or other sharp objects to lick the cover. Even a slight pressure can leave scratches on the screen or body, and models with a high-performance body can be scratched. AMOLED-With displays (such as the Xiaomi Watch 2 Pro), this will cause permanent damage.

Method 1: Standard extraction for latched covers

Most of the Mi Band and Xiaomi Smart Band cases are mounted with side slider snaps to remove the case:

1. Place the watch up on a flat surface (such as a table).
2. Find a small slot or protrusion on the case - it is usually located on the side, display.
3. With your thumb, press the ledge and move the case to the side (left or right, depending on the model), the movement should be smooth, without jerking.
4. Once the latch opens, gently pull the case up, freeing the body.

If the case doesn't lend itself, try to heat it up slightly with a hair dryer (temperature no higher than 40°C) - the silicone will become more elastic. Don't direct hot air to the screen or buttons!

Put the clock on a soft surface |

Find the latch or the protrusion |

Check the dryness of the case |

Use the hair dryer if necessary-->

For Xiaomi Watch models (like the Watch S3 or Watch 2 Pro), the process is slightly different:

• 🔄 On the back of the case, find two small buttons (usually hidden under the strap).
• 👆 Press them in at the same time – this will weaken the attachment.
• 📱 Carefully pull the cover up without putting excessive effort.

⚠️ Note: Some Xiaomi Watch models have mount buttons made of brittle plastic. If you feel resistance, don't push harder - it's better to try again after heating the case.

3. Method 2: Removal of the cover with thin tools

If the standard method didn't work, you can use flat tools that don't damage the body.

• 💳 Plastic card (bank or discount card).
• 📱 A guitar mediator.
• 🔧 Plastic spatula for phone repair.
• 🧲 Silicone sucker (for models with a smooth body).

Algorithm of action:

1. Insert the tool in the gap between the case and the case (it is better to start from the corner).
2. Carefully run along the edge, separating the cover from the watch. Don't push too hard, light pressure is enough.
3. Once the case starts to “go away”, pull it up, helping the tool.

For magnetically mounted cases (such as some models for the Xiaomi Watch S1), this method is not suitable - the magnets may be too strong, in which case it is better to use the heating method (described below).

💡

If the case is "feeling" due to the hit of cream or sweat, wipe the edges of the body with an alcohol napkin - this will reduce the stickiness of silicone.

Method 3: Thermal exposure (for "stiff" covers)

If the case is not removed due to deformation or suction, it can be slightly heated, which will make the material more malleable.

• 🔥 Dryer: Direct warm air (not hot!) on the cover for 20-30 seconds, then try removing it in the standard way.
• ☀️ Warm Water: Place the watch (only if it is waterproof!) in 30-35-hour water°C for 1-2 minutes. Do not use boiling water!
• 💡 Incandescent lamp: hold the lamp case for 10-15 seconds (distance 10-15 cm).

After heating, immediately try to remove the case - silicone or plastic should become softer. If you do not work the first time, repeat the procedure, but do not overheat the device.

⚠️ Warning: Do not use a microwave, oven or open fire to heat the case.This can damage the watch battery or melt plastic parts.

5. Method 4: Disassembly of the cover (for complex cases)

If the case is broken or deformed (for example, after falling), it will have to be carefully cut. This is an extreme method, but sometimes there is no other way out.

• ✂️ Sharp scissors (preferably manicure).
• 📏 Line or pattern for smooth cut.
• 🧴 Moment glue or silicone sealant (to restore the cover after removal).

Step-by-step:

1. Mark the cutting line on the cover - it should pass along the seam or side, so as not to touch the body of the watch.
2. Carefully cut the case along the marked line. Keep the scissors parallel to the body so as not to scratch the watch.
3. After removing the device, you can try gluing the case (if it is still suitable for use).

If the case is metal (for example, for the Xiaomi Watch S1 Pro), cutting will not help - you will have to look for a specialized tool for unclutching the latches or contact the service center.

Method 5: Contacting a Service Center

If all of the above methods did not work, or you are afraid to damage the watch, it is better to contact professionals. Xiaomi official service centers have special tools for removing cases without risk to the device. The cost of the service usually does not exceed 300-500 rubles, and in some cases (if the case is original and warranty) the procedure can be free.

Advantages of using the service:

• 🛠️ Guarantee of safety of the device - the masters use professional equipment.
• 🔧 Diagnosis of possible damage - for example, if the case is not removed due to deformation of the body.
• 📋 Consultation on the selection of a new case - specialists will suggest compatible models.

Xiaomi service centers can be found on the official website or through the Mi Home app. Before visiting, check if they are engaged in repair of wearable devices - some centers specialize only in smartphones.

💡

If the case is not removed due to mechanical damage (for example, after a blow), self-attempts can aggravate the problem, in which case contacting the service is the only safe option.

7. How to avoid problems in the future

To avoid difficulties in the next removal of the case, follow these tips:

• 🧼 Clean your cover and case regularly of sweat, creams and dirt. Use wet wipes or soap solution (for waterproof models).
• 🔄 Remove the cover periodically (every 1-2 weeks) to prevent “staying».
• 🛒 Buy cases with the model in mind. For example, for Xiaomi Watch 2, a case from the Watch will not work. S1 — Check compatibility before buying.
• 🌡️ Avoid extreme temperatures. Don't leave your watch in the sun or heaters, it will warp the cover.

If you change cases often, look for magnetically mounted models – they are easier to remove but more expensive. For example, Xiaomi Smart Band 8 Pro cases with magnetic fixation can be removed in a second without exerting effort.

Frequently asked questions