How to turn off Xiaomi Mi Band 6: all working ways and nuances

The Xiaomi Mi Band 6 fitness bracelet has become one of the most popular gadgets for tracking activity, but many users are faced with the question: how to turn it off correctly? At first glance, it seems that the procedure is elementary - pressed the button and ready. However, the Mi Band 6 has its own features: the lack of a classic shutdown mechanism, the risk of losing synchronized data and the nuances with saving charge. In this article, we will analyze all the working methods of turning off the bracelet, including software methods through the Mi Fitness application and emergency options when getting stuck.

It’s important to understand that the Mi Band 6 is not designed to shut down frequently, but its optimized firmware is designed to run around the clock with minimal power consumption. However, sometimes it’s necessary: before long-term storage, when transferring the device to another person or to fix software failures. We tested all methods on current firmware versions (including 1.0.6.54 and later) and collected step-by-step instructions for typical user errors.

Why Mi Band 6 doesn’t turn off like a regular gadget

Unlike smartphones or smartwatches, the Xiaomi Mi Band 6 does not have the standard “Switch Off” option on the menu.

• 🔋 Energy efficiency: The bracelet consumes everything ~5% charge per day in standby mode, so constant on/off is impractical.
• 📱 Sync with the application: The firmware is optimized for background data transfer in Mi Fitness (formerly Mi Fit).Forced shutdown can interrupt sync.
• 🛠️ Hardware Limitations: One physical button performs several functions (wake up, go back, confirm), which complicates the implementation of the classic shutdown.

Xiaomi expects users to remove the bracelet from their hands to save charge (automatically shutting down the display after 5 seconds of inactivity) or use flight mode (Settings → Flight Mode), but these methods do not amount to completely shutting down.

⚠️ Attention: Frequent forced shutdown of the bracelet by holding the button (more than 20 seconds) can cause a failure of the file system. the recommended interval between such operations is not more than 1 time per month.

Method 1: Software shutdown through the bracelet menu

This is the safest method, but it only works on firmware 1.0.6.XX and higher.

1. Wake up the bracelet screen by pressing the touch button or bringing your hand to the display.
2. Scroll the menu to the right to the Settings (cog icon).
3. Choose About the device → Turn it off.
4. Confirm the action by clicking the tick. The bracelet vibrates and shuts down in 3-5 seconds.

If you don't have the option to turn off, your firmware version doesn't support this option. Update your bracelet through the Mi Fitness app:

Synchronize data with the application|Charge the bracelet to 50% or higher|Connect to a stable Wi-Fi|Close background applications on your smartphone-->

Once updated, try again. This method is guaranteed to store all settings and activity data.

Method 2: Forced shutdown by a button (hard reset)

If the bracelet is getting stuck or does not respond to touch, use a hardware reset:

1. Remove the Mi Band 6 from your hand and place it on a flat surface.
2. Press the touch button for 15-20 seconds before the Xiaomi logo and vibrations appear.
3. Release the button, the bracelet will turn off. If the screen flashes and turns on again, repeat the hold.

⚠️ Warning: If the bracelet does not turn on for 10 minutes after forced shutdown, connect it to the charger for 30 seconds - this will reset the power lock.

Method 3: Turn off via Mi Fitness app

The official Mi Fitness app (available for Android and iOS) allows you to remotely control the bracelet, including turning it off.

1. Open the application and wait for data synchronization with the bracelet.
2. Go to the Profile section → Mi Smart Band 6.
3. Select Device Settings → Additionally.
4. Turn off the bracelet and confirm the action.

This method has two advantages:

• 🔄 Automatic data synchronization before shutdown.
• 📲 The ability to enable the bracelet remotely (via the same section of the application).

If the option to turn off the bracelet is not on the menu, update the app to the latest version or check the bracelet connection over Bluetooth. On iOS, additional permission to access Bluetooth in the system settings may be required.

💡

Before turning off via the app, turn off call notifications (Settings → Notifications → Calls) to avoid conflicts when you turn on again.

Method 4: Discharge the battery before automatic shutdown

If other methods are not available (for example, the bracelet does not respond to a button and does not sync with the application), you can wait until the battery is completely discharged.

• ⚡ The discharge time depends on the current charge level: from 2 hours (at 10%) to 12 hours (at 100%).
• 🔌 Connection to charging on 1-2 stop the discharge process for a second.
• 📊 Data from the last 24 hours may be lost if it is not synced with the app.

To speed up the discharge:

1. Activate the screen’s constant lighting (Settings → Display → Backlight → Always).
2. Turn on sleep and heart rate tracking in continuous mode.
3. Use the bracelet in low temperatures (below +10°C) – this increases energy consumption.

⚠️ Attention: Complete discharge of the lithium polymer battery to 0% When you automatically shut down, immediately connect the bracelet to the charger. 10-15 minutes, even if you don’t plan to use it.

Method 5: Reset to factory settings (extreme case)

This method will result in the complete removal of all data from the wristband, including notification settings, activity profiles and measurement history.

• 🔄 The bracelet is frozen and does not respond to other methods.
• 📦 You transfer the device to another user.
• 🛠️ Critical firmware errors need to be eliminated.

Resetting instructions:

1. Connect the bracelet to the charger.
2. Press the touch button for 25-30 seconds before the Xiaomi logo and vibrations appear.
3. Release the button and the reset process will begin (it will take ~1 minute).
4. After the reboot, the bracelet will be in a “out of the box” state.

Reconfiguration will require:

• 📱 Connect the bracelet to the Mi Fitness app again.
• 🔄 Update the firmware to the current version.
• ⚙️ Personalize settings (notifications, steps goals, etc.).

How to turn on Mi Band 6 after turning off

After any of the described methods of deactivation, the bracelet is switched on in the same way:

1. Connect the Mi Band 6 to the charger (even if the battery is not discharged).
2. Wait 5-10 seconds and the Xiaomi logo will appear on the screen.
3. If the bracelet does not respond, press the touch button once.

When first activated after resetting, you will need:

• 📲 Connecting to the Mi Fitness app via Bluetooth.
• 🔄 Synchronization of time and regional settings.
• ⚙️ Set up the main parameters (gender, age, activity goals).

If the bracelet is not activated:

• 🔌 Check the cable and power supply (use the original RAM on the 5V/1A).
• 🔋 Hold on charging for 30 minutes – sometimes the power controller is blocked.
• 🛠️ Contact the service center if the screen does not show signs of life (possible battery failure).

💡

After any shutdown, wait until the application is fully synchronized before reusing the bracelet, which will prevent the loss of activity statistics.

Frequent Mistakes and How to Avoid Them

Users often encounter problems when trying to turn off the Mi Band 6.

Another common mistake is using non-original chargers, and the bracelet may not turn on or not work smoothly if:

• 🔌 The charging voltage exceeds 5V.
• 📉 Power below. 0.5A.
• 🔋 The cable has damaged contacts.

To check the originality of the CC, pay attention to:

• 🏷️ Inscription MDY-08-EM adapter.
• 🔌 Magnetic contacts on the charging cable (should be tightly attracted to the bracelet).
• 📦 Packaging with Xiaomi logo and hologram.

FAQ: Answers to popular questions