Xiaomi AirDots wireless headphones (including Redmi AirDots, AirDots Pro, AirDots 3, and more) have become some of the most popular accessories due to a combination of price and quality. However, many users face a basic problem: how to turn the device off completely, rather than just disconnect it from the phone. Unlike wired counterparts, where you just need to remove the plug, wireless gadgets require a special approach.
In this article, we will look at all possible ways to deactivate AirDots, from standard methods to forced shutdown when hanging. Particular attention will be paid to the typical errors that lead to a fast battery discharge or improper headphones. For example, many people mistakenly believe that it is enough to put headphones in a case — but this only puts them in standby mode, not completely turns them off.
If your Xiaomi AirDots don't respond to taps, run out overnight, or connect to other devices, you'll find solutions here, and for those who want to extend the life of the accessory, we've added tips for optimal battery use.
1. Standard method: switch off via button
The most obvious method is to use a physical button on the headphone case, but there are some nuances that depend on the model:
- 🔘 AirDots 1/2 Generations: Hold the button MF (multifunctional 5–7 It's a little bit of a second until the light goes off, and in some versions, it flashes red first, and then it turns off.
- 🔘 AirDots Pro/3/Youth Edition: Touch and Hold button 8-10 seconds. Release only after double beeping and LED quenching.
- 🔘 Redmi AirDots S / TWS 2: Combined pressing – first a short touch (for confirmation), then holding 6+ seconds.
Important: If the indicator flashes white after holding the button, the earphone went into pairing mode, not turned off, in which case, repeat the action, holding the button longer for 2-3 seconds.
⚠️ Warning: Don't confuse off with reset to factory settings (discussed below) When reset, the headphones erase all stored devices and return to the out-of-the-box settings".
Hold the button until the indicator is quenched | No sound signal after release | The earphone is not detected by the phone in the Bluetooth list | The indicator does not flash in the case-->
2. Automatic shutdown via case
Many users think that if you put AirDots in a charging case, they'll shut down. That's not quite true.
- Transfers the headphones to deep sleep (low power consumption, but not a complete shutdown).
- Start charging if the battery is not full.
To force the headphones to turn off through the case, do the following:
- Get both earphones out of the case.
- Turn them off manually (see section above).
- Put them back in the case, and they will be completely deactivated.
| Model | Shutdown through the case | Energy consumption in the case |
|---|---|---|
| AirDots 1/2 | Only if manually switched off beforehand | ~1% in 24 hours |
| AirDots Pro | Automatically in 10 minutes in the case | ~0.5% in 24 hours |
| Redmi AirDots 3 | Requires manual shutdown | ~1.2% in 24 hours |
| AirDots Youth | Turns off when the case cover is closed | ~0.8% in 24 hours |
Tip: if the headphones discharge in a case in 1-2 days, the problem is in the background processes. Try resetting them to the factory settings (instruction in section 5).
Every day |Only when I don't use for a few days |Never, only put in a case |I don't know how to do it-->
3. Shutdown via mobile application
The official Mi Home app (or Xiaomi Wear for new models) allows you to control the headphones remotely, but the functionality depends on the firmware version:
- 📱 For AirDots. 1/2: The app only shows the charge level. You can't turn off the headphones through the software.
- 📱 For AirDots Pro/3: The device menu has a Power Off button).
- 📱 Redmi AirDots S: Turn off function appears after firmware update to version 1.4.0.3 and higher.
Step-by-step instructions for supported models:
- Open the Mi Home app (or Xiaomi Wear).
- Select your headphones in the list of devices.
- Go to Settings. → Nutrition management.
- Click Turn Off and confirm the action.
⚠️ Warning: If the headphones keep flashing after the app is turned off, it's a firmware bug. Solution: Update the software through Settings → Update of firmware in the same appendix.
💡
Before turning off through the app, turn off the headphones from your phone manually (in Bluetooth settings).This will prevent the device is occupied error.
4. Forced shutdown when getting stuck
If AirDots don't respond to a button, flash constantly, or connect to someone else's device, they need to be forced to restart. This method works for all models, but requires care:
- Put the headphones in the case and close the lid.
- Wait 30 seconds - sometimes that's enough to reset.
- If it doesn't work: Take both earbuds out of the case. Hold the buttons on both earbuds at the same time for 15 to 20 seconds. Release after the lights go out and turn red again.
After a forced reboot, the headphones may require re-pairing with the phone, and in some cases, touch controls (such as gestures to play music) are also reset.
What to do if one earphone does not turn off?
5. Reset to factory settings
If the headphones don't turn off completely, connect to unfamiliar devices or give out errors, a complete reset will help, which is an extreme measure, since all stored devices and settings are erased.
Instructions for different models:
| Model | Reset combination | Sign of successful discharge |
|---|---|---|
| AirDots 1/2 | Hold the button for 30 seconds (until flashing in red and white) | Double beep. |
| AirDots Pro | Triple touch of the sensor + 10 seconds retention | Blinks purple |
| Redmi AirDots 3 | Hold both buttons simultaneously for 15 seconds | Voice message "Reset" |
Once reset, the headphones will automatically turn off, and you need to reconnect them to your phone via Bluetooth to reuse them.
💡
Resetting to factory settings is the only way to fix the “invisibility” error of headphones in the Bluetooth list if other methods have not worked.
6. Optimal battery utilization
Many users complain that AirDots discharge quickly even when it is turned off.
- 🔋 Bluetooth background activity: even in the case, some models remain standby.The solution is to turn off manually (see section 1).
- 🔋 Outdated firmware: versions below 1.2.0.8 have power-consuming bugs. Update the software via the Mi Home app.
- 🔋 Mechanical damage: If the earphone discharges in a few hours, check the integrity of the body (especially after falls).
Tips for extending the life of the battery:
- ⚡ Store your headphones in a case with a charge of 40-60% (not 100%!).
- ⚡ Turn them off completely if you don’t use them for more than 3 days.
- ⚡ Avoid overheating (do not leave it in the sun or near heat sources).
Fun fact: AirDots 3 and later have a 5-minute shutdown feature, and to activate it, upgrade to 1.7.1.0 or higher.
7. Frequent mistakes and how to avoid them
User experience shows that 80% AirDots are related to wrong actions.-5 mistake:
- Too short hold of the button (less than 5 seconds) – the headphone goes into pairing mode rather than turning off.
- Using a case as a switch – as we found earlier, a case doesn’t always turn off power.
- Ignoring the beeps -- double squeaking when you turn off means you're successful in shutting down. If you don't, repeat the action.
- Update firmware "on the knee" - interrupted update can lead to the fact that the headphones will stop turning off completely.
- Zero charge storage – if the battery is completely discharged, the headphones may not turn on again.
If you are faced with a non-standard situation (for example, one earphone turns off and the second one does not), try the following algorithm:
1. Turn off the working earphone (through the button).
2. Put both in the case for 10 minutes.
3. Pull out and hold the buttons for both 15 seconds.
4. Repeat the shutdown attempt.