How to turn off wireless headphones Xiaomi Earbuds: all ways + problem solving

Why is it important to turn off Xiaomi headphones correctly?

Xiaomi Earbuds wireless headphones (including Redmi AirDots, Mi True Wireless, Buds 3/4 Pro and others) require proper handling to extend battery life and avoid software failures. Many users simply put them in a case, believing that this automatically turns off power - but this is not always the case.

Improper shutdown can lead to battery backlight when the headphones remain in standby mode, or even to firmware freeze if you interrupt the upgrade process. In this article, we will examine all the official and hidden ways to shut down, as well as typical errors that shorten the life of your Earbuds.

We will focus on touch-controlled models (such as Xiaomi Buds 4 Pro or Redmi Buds 5), where standard methods may not work due to firmware features. If your headphones do not respond to presses, do not rush to bring them into service: in 90% of cases, the problem is solved software.

Method 1: Turn off via the touchpad (for most models)

The most versatile method, running on Xiaomi Earbuds 3/4 Pro, Redmi AirDots 3/5 and other models with touch control.

1. Get your headphones out of the case (they should be included).
2. Press and hold the touchpad on one of the headphones for 5-7 seconds.
3. Wait for the beep (usually a double squeak) or the indicator flashing in red – this is a confirmation of the shutdown.

⚠️ Attention: On models of Xiaomi Buds 3T Pro and Redmi Buds 4 Active Holding the sensor for more than 10 seconds can reset the connection settings. If the headphones then do not connect to the phone – you will need to re-sync via Bluetooth.

If the sensor is not responding:

• 🔋 Check the charge of the headphones (less than 5% can block commands).
• 📱 Make sure the headphones are not connected to the device (break the connection in Bluetooth settings).
• 🔄 Try holding the sensor on another headphone – sometimes one of them “hangs".

Method 2: Automatic shutdown through the case

The Xiaomi Earbuds charging case not only stores the headphones, but also manages their power.

Critical feature: Xiaomi Buds 3 Pro and later headphones may not turn off automatically if less than 20% of the charge remains in the case, this is done to prevent the battery from completely draining. To force them to turn them off, use Method 1 or Method 3.

💡

If the headphones don't turn off in the case, try closing it for 20 to 30 seconds, then opening it and closing it again. This resets the Bluetooth connection and forcing shutdown.

Method 3: Software shutdown via Mi Earphones app

The official Mi Earphones app (available for Android and iOS) allows you to control your headphones remotely.

1. Connect the headphones to the smartphone via Bluetooth.
2. Open the Mi Earphones app (you can download it from Google Play or the App Store).
3. Go to the Device Management section → Turn it off.
4. Confirm the action (some models will require holding the button in the app for 3 seconds).

⚠️ Attention: On models of Xiaomi Buds 3T The Pro and Redmi Buds 4 Pro app can show the "Switch Off" option, but actually put the headphones into deep sleep mode. To completely disable them, Combine this method with Method 1 (sensor retention).

If the app doesn't see the headphones:

• 🔄 Reboot Bluetooth on your phone (Settings) → Bluetooth → Turn off/Enable).
• 📱 Update the Mi Earphones app to the latest version.
• 🔋 Check the charge of the headphones (at a level below 10%, the connection may be interrupted).

Method 4: Reset to factory settings (if the headphones are not turned off)

If the headphones are stuck and not responding to commands, you may need a complete reset, which is an extreme measure, since it removes all connection settings.

1. Place both headphones in the case and close it for 10 seconds.
2. Remove the headphones and hold the touchpads on both headphones simultaneously for 15 seconds.
3. Wait for the flashing of the red and white indicator (on models without the indicator, a double signal will sound).
4. The headphones will turn off and reset to factory settings.

After discharge:

• 🔗 Reconnection to the device via Bluetooth will be required.
• 🎧 All personal settings (e.g. equalizer in Mi Earphones) will be reset.
• 🔋 Battery charge may seem lower than real - let the headphones lie in the case for 5-10 minutes for calibration.

Method 5: Turn off via voice assistant (for advanced models)

Headphones Xiaomi Buds 4 Pro and Redmi Buds 5 Pro support control through voice assistants (Alice, Google Assistant, Siri).

1. Activate the voice assistant on your connected smartphone (for example, say “OK, Google” or hold the home button on your iPhone).
2. Say the command: Turn off Xiaomi headphones or turn off Bluetooth device [model name]
3. Confirm the action if the assistant requests permission.

Limitations of the method:

• 🚫 It only works if the headphones are connected to the device.
• 🔊 On some firmware, the assistant can break the connection, but not turn off the headphones physically.
• 📱 A stable internet connection is required to process voice commands.

💡

Voice control is convenient for a quick shutdown, but does not guarantee a complete power outage. To save charge, use this method in conjunction with manual disconnection through the sensor.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that lead to a quick discharge or breakage of the headphones.

⚠️ Warning: If you put your headphones in the case when it's on, but you don't close it completely, they'll stay in device search mode, which results in a battery drain in 2-3 hours instead of the standard 24.+ sleep-time.

Error 1: Using a non-original charging cable.

Uncertified cables may supply the wrong voltage, resulting in:

• 🔥 Overheating of the charge controller.
• 🔋 Incomplete battery charge (earphones show 100%, but last 1-2 hours).
• 🚨 Automatic activation after “off".

Mistake 2: Keeping headphones out of the case.

Even when switched off, Xiaomi Earbuds discharge 5-10% per day if they are separated from the case.

• 🔌 Passive energy consumption by Bluetooth controller.
• 🌡️ Effects of temperature (at +30°C discharge accelerates 2 times).

Error 3: Interrupting the firmware update.

If your headphones are updated through Mi Earphones, do not manually turn them off.

• 🔄 "Located on the Xiaomi logo when enabled.
• 🔊 Losing sound in one of the headphones.
• 📵 Complete inoperability (requires flashing in the service).

How to check if the headphones are turned off?

Users often think that the headphones are off, but they remain in hidden standby mode, and you can check their status in several ways:

1. Visually: 🔴 The indicator on the headphones does not burn (or flashes red 1 time when switched off). 🔋 In the case, the charge indicator does not flash white (this means an active connection).
2. Through Bluetooth: 📱 On your smartphone, open Settings → Bluetooth. 🔍 If the headphones are disabled, they will not appear in the list of "Connected devices".

Mi Earphones

:

• 📲 Launch the application – if the headphones are turned off, the inscription “Device is disabled” will appear".