The Xiaomi Mi Band 3 fitness bracelet has become a real bestseller among wearables due to its functionality and affordable price. However, many users face a simple but important task - how to turn off this gadget correctly. At first glance, it seems that it is enough to press a button, but in practice it is not so clear.
In this article, we will discuss in detail all possible ways to disable the Mi Band 3, including software and hardware methods, how to temporarily deactivate the bracelet to save charge, how to perform a complete shutdown before long-term storage, and what to do if the device does not respond to standard commands, and pay special attention to nuances that the manufacturer does not always specify in the official instructions.
It is important to understand that a wrong shutdown can cause a device to malfunction or data loss, so we will not only describe each method, but also give recommendations for their safe use in different situations.
Why you should turn off Mi Band 3
At first glance, it seems that a fitness bracelet should work all the time, but there are several good reasons for its complete or temporary shutdown:
- 🔋 Saving battery life during prolonged non-use (e.g. during vacation or repairs)
- ⚡ Preparation for firmware or resetting settings to factory
- 🔄 Elimination of software failures and "hangs" of the device
- 📦 Long-term storage without recharging (more than 3 months)
- 🛠️ Replacement of the battery or repair of internal components
Many users mistakenly believe that it is enough to simply remove the bracelet from your hand and it will automatically go into sleep mode. 3 It continues to consume energy even in an inactive state, albeit in smaller quantities. 20-30% More effective with prolonged downtime.
Another important thing is to prepare for a firmware update, where some software versions require the device to be completely disabled before installation, or the process may end in error, which is especially true for users who install custom firmware through informal channels.
Method 1: Standard shutdown via button
The most obvious and recommended way for the manufacturer is to use a physical button on the body of the bracelet, but there are some nuances that not everyone knows about.
To properly turn off Mi Band 3 via the button:
- Make sure the bracelet is not connected to the charger.
- Find the physical button on the bottom of the case (under the touch screen)
- Press the button on 8-10 seconds before the vibration occurs
- After vibration, release the button - an animation of the shutdown will appear on the screen.
Important: If you release the button before the time (before the vibration), the bracelet will simply unlock or go to the menu, and do not hold the button for longer than 15 seconds, this can cause a forced reboot instead of turning off.
Bracelet unloaded.
Screen unlocked (touched)
The button is pressed to vibration.
No active notifications on the screen-->
If the bracelet does not respond to the hold of the button, this may indicate:
- 🔋 Recharge the battery (charge the device to at least 10%)
- 💻 Software failure (try to reboot the bracelet)
- 🛠️ Mechanical breakage of the button (requires repair)
Method 2: Turn off via the Mi Fit mobile application
For those who prefer software methods, it is possible to disable the bracelet through the official application, which is especially convenient if the physical button is faulty.
Instructions for turning off via Mi Fit:
- Open the Mi Fit app on your smartphone
- Select your Mi Band 3 from the Device List
- Go to the Device Profile → Settings
- Scroll down and find Disable the device or Remove the device.
- Confirm the action - the bracelet will receive a command to turn off
Note that in some versions of the app, this item may be called differently or in a different section. If you don't see a direct shutdown command, you can use an alternative method:
Alternative method through Mi Fit
Important point: shutting down via the app does not always lead to a complete power outage. In some cases, the bracelet simply goes into deep sleep mode, continuing to consume minimal amount of energy.
💡
Before turning off via Mi Fit, synchronize all data – this will prevent the loss of activity statistics for the last day.
Method 3: Forced shutdown when getting stuck
Sometimes Mi Band 3 can freeze, stop responding to touch and push, and in such cases, a forced shutdown is required.
Algorithm of actions when hanging:
- 🔌 Connect the bracelet to the charger on 5-10 minute
- 🔄 If the screen is not responding, press the button on 15-20 seconds (up to double vibration)
- 📱 Try reconnecting the bracelet via Mi Fit (break and re-create the pair)
- 🔧 In extreme cases, reset settings (described in the next section)
Forced shutdown should only be used in extreme cases, as it can lead to:
- Loss of unsynchronized activity data
- Sensor failure (recalibration required)
- Damage to the bracelet file system
💡
Forced shutdown is a last resort, always try to fix the problem first through a standard reset (hold the 10 seconds button).
If the bracelet is stuck during the firmware update, do not interrupt the process by turning it off! This can lead to the "bricking" of the device.
⚠️ Warning: When getting stuck during firmware, wait for the battery to discharge completely (24-48 Then connect to the charger - the device must automatically restore the operability.
Method 4: Complete reset to factory settings
In some situations, it may be necessary to completely reset the bracelet to factory settings.This is a drastic measure that removes all data from the device, but sometimes it is the only way to bring it back to life.
How to Reset to Mi Band 3:
1.Make sure the bracelet is at least 50% charged
2. navigate to the bracelet menu by swiping up the screen
3. Find the "Settings" item (cog icon)
4. Scroll to "Settings Reset" (arrow icon)
5. Confirm the action by clicking the tick.
6. Wait for the reboot (about 30 seconds)
7 Once turned on, the bracelet will be as new.After the reset, you will need:
- 📱 Reconnect the bracelet to the Mi Fit application
- 👤 Set up a user profile (gender, age, weight)
- ⚙️ Personalize notification settings
- 🔄 Synchronize data from the previous period (if it is saved in the cloud)
Important: Resetting is not the equivalent of turning off the bracelet automatically after the procedure, and to turn it off completely, after resetting, press the button for 10 seconds.
| Action. | Effects of consequences | Implementation time |
|---|---|---|
| Standard shutdown | Total power outage | 10 seconds. |
| Shutting down via Mi Fit | Sleep transition | 1-2 minutes |
| Forced reset | Loss of unsaved data | 20 seconds. |
| Resetting settings | Deletion of all data | 30-60 seconds. |
Method 5: Shutting down before long-term storage
If you plan to not use the bracelet for a long time (more than 3 months), it must be properly prepared for storage.
Proper preparation for storage:
- Fully charge the battery (up to 100%)
- Synchronize all data through Mi Fit
- Turn off the bracelet in the standard way (button)
- Remove the capsule from the strap (if storage is planned in a wet room)
- Place the bracelet in a dry place at room temperature
- Every 3 months, turn the device on for 10 minutes to calibrate the battery.
What can not be done during storage:
- 🔥 Leave in direct sunlight
- ❄️ Store at a temperature below 0°C or higher than 45°C
- 💦 Place in a wet environment (the battery may oxidize)
- 🔋 Keeping it completely discharged (resulting in battery degradation)
When properly stored, the Mi Band 3 can retain up to 70% charge for 6 months.If you remove the capsule from the strap, store it in an antistatic bag or wrapped in soft cloth to avoid scratching the screen.
💡
Before turning on after long-term storage, let the bracelet warm up to room temperature (if stored in the cold) - this will prolong the life of the battery.
Frequent Mistakes and How to Avoid Them
Many users make common mistakes when trying to turn off Mi Band 3, which leads to undesirable consequences.
Mistake 1: Holding the button too short
Many people release a button through 3-5 So, you can just unlock the bracelet or go to the menu for a second without waiting for the vibration. 10 Wait for a moment or wait for a characteristic vibration.
Error 2: Shutting down during synchronization
If you interrupt the data synchronization process, the information from the last hours may be lost. Solution: always check that the bracelet screen does not have a synchronization icon (two arrows) before turning it off.
Error 3: Using unofficial firmware
Some custom firmware changes the logic of the power button. Solution: Check the firmware version in the bracelet settings before turning it off.
Error 4: Storage with a fully discharged battery
This results in a deep discharge and can cause the battery to fail.Solution: before storing, charge the bracelet to 50-70% and turn it off.
⚠️ Warning: If the bracelet is turned on spontaneously after switching off, this may indicate a malfunction of the power button or power controller.