How to turn off the Xiaomi Mi Band fitness bracelet

Owners of popular activity trackers often face the need to completely turn off the device, which may be required during long-term storage, during transportation, or if you just want to give the battery a rest. However, the standard menu does not always offer an obvious “Switch off” button, which raises a lot of questions for new users.

The procedure for power outage depends on the specific model of your device, whether it is a classic version or a modification with NFC. In this article, we will analyze in detail the algorithms of actions for different generations of trackers Xiaomi and Huawei (Honor), and also discuss the subtleties of working with a touch screen and a button.

Before you start manipulating, it's important to understand the difference between deep sleep and total shutdown. Deep sleep saves energy but retains some background processes, whereas a complete shutdown stops the system completely.

Features of turning off Mi Band 6, 7 and 8 models

Since the sixth generation, the Mi Band has undergone major interface changes, with the devices losing the physical button and all control switched to the touch screen, and to turn off the Mi Band 6, Mi Band 7 or Mi Band 8, you need to use the settings menu on the tracker itself.

Swipe left or right on the home screen until you find an icon with a gear. In some versions of the firmware, this item may be called "Settings" or "System." Inside the menu, you will need to scroll down to "Switch off" or "Power off."

Click on this, and you'll see a confirmation request on the screen, and the system will tell you to choose between turning it off or restarting it, and this is done to prevent the device from accidentally shutting down at an important time.

It’s worth noting that on non-NFC models, the menu may be a bit shorter, but the principle remains the same: If you can’t find the shutdown point, make sure your bracelet firmware is updated to the latest version through the app.

Instructions for versions with NFC module

Tracker modifications equipped with NFC have an extended settings menu. Owners of contactless versions of Global may notice additional items associated with cards and payment systems.

Go to the Switch menu and find the System section. In the global market versions, the Off point is often at the bottom of the list. Click on it and confirm the swipe or tap on the screen.

⚠️ Note: If you have a transport card set up, make sure you remember the pin code or unlock method before turning it off, as when enabled, the system may request re-authorization for payment security.

Some users note that on the NFC versions, the shutdown process takes a couple of seconds longer, due to the correct termination of the communication module and storing the card data in protected memory.

Managing Mi Band Pro and Lite models

The Mi Band Pro series (such as the Mi Band 4 Pro or 5 Pro) and Lite versions have their own interface features. In the Pro series, screens often have higher resolution and run under the modified MIUI for Watch shell.

To turn off these devices, you usually need to pinch the touch area or find the appropriate point in the notification curtain. Swipe from top to bottom to open the control center, and find the power icon. If there is none, swipe to the left to the settings.

In Lite versions, the menu can be simplified, and there is often no choice between "Reboot" and "Switch off" — the device simply turns off after confirmation, and this is done to simplify the user experience on budget models.

💡

If the touch screen reacts poorly, wipe it with a dry soft cloth.Goldy marks or drops of sweat can prevent the swipes from being correctly recognized in the settings menu.

Specificity of devices with a physical button (Mi Band 1, 2, 3)

Early generations of trackers, such as the Mi Band 1, Mi Band 2 and Mi Band 3, featured a touch button or touch area under the screen, and in these models the logic of the work was different from today's touch panels.

To turn off these devices, you had to repeatedly press the button before the menu appeared or use a long press. In Mi Band 3, for example, you had to pinch the touch area for a few seconds until the display appeared off icon.

Older models, such as the Mi Band 1S, often required a charger connection or the use of specialized management apps on Android, as there might not be a built-in shutdown menu in the firmware.

If you still have such devices, be careful with prolonged pressing: on some firmware, this action may have initiated resetting or pairing, rather than turning off.

Alternative methods: discharge and discharge

In situations where the touch screen is unresponsive or the system is getting stuck, a standard shutdown becomes impossible, and in such cases you can use a full discharge method. Leave the tracker on until it goes out on its own.

Another radical but effective method is factory reset, which not only cleans up all the data, but often reboots the device, and then you can try to turn it off or leave it running.

• 🔋 Leave the device in bright sun or plug into a powerful charger (with caution) to speed up charge-discharge cycles.
• 🔄 Perform reset via the app: go to the device profile and select Untie or Reset settings".
• ❄️ Place the tracker in a cold place (but not in the freezer!) to reduce the chemical activity of the battery and slow down the discharge if the purpose is storage.

💡

Complete discharge of lithium-polymer battery to 0% is not recommended for long-term storage, it is better to leave a charge at 40-60%.

Using third-party bracelet management apps, such as Notify for Mi Band, can also provide advanced power management capabilities, including software shutdowns if standard methods fail.

Enable the device and first start

Once you’ve managed to turn off the tracker, it also has its nuances: Most modern Xiaomi models require a long tap on the touch area or a connection to the charger to turn on.

When you first turn on after a long downtime, the screen may not catch fire right away. This is normal for lithium batteries that have gone into deep discharge. Leave the device on charge for 15-20 minutes.

If the device is not responding to the charging connection, check the contacts on the back of the tracker and on the charging cable itself. Contact oxidation is a common cause of problems with turning on after turning off.

⚠️ Warning: Do not attempt to turn on the wet tracker immediately after charging.Let it dry completely to avoid short circuits inside the case.

After successful activation, the system may suggest updating the firmware. It is recommended to agree to the update, since new versions of the software often contain corrections for power consumption errors.

Frequent problems and their solution

Users often experience a situation where the bracelet does not turn off or spontaneously turns on, which can be caused by a software failure or sticking a touch button.

If the device is cyclically restarted (bootloop), try to discharge it completely. In some cases, "medical" charging helps: connecting to a low-current power source (for example, a low-current power source, USB-computer port for several hours.

In rare cases, the problem lies in the physical malfunction of the button or the display plume. If software methods do not help, you may need to intervene in the service center.

Tips for storing a turned off tracker

If you plan to not use the tracker for a long time, proper storage is critical for the longevity battery.

The optimal charge level for storage is about 50-60%, and every 3-4 months it is recommended to check the device and recharge it to this level to avoid a deep discharge that irreversibly damages the battery.

• 📦 Keep the gadget in a dry place, away from direct sunlight.
• 🌡️ Optimal storage temperature – room temperature, avoid extreme cold or heat.
• 📱 Periodically check the charge even if the device is turned off, as self-discharge still occurs.

Compliance with these simple rules will allow you to return the device to operation at any time without losing battery capacity.