The first switch on Xiaomi Mi Smart Band 4 is often a real challenge for owners, especially if the device has been lying on the store shelf or in the box for a long time. Many users mistakenly believe that the gadget should respond to the press of the button immediately after extraction, but this is not the case. The tracker is initially in deep sleep mode to save energy, and it requires a connection to a power source to activate it.
Modern wearables from Xiaomi are designed with maximum autonomy, so they don't have physical power buttons in the classical sense. The whole process of control is tied to the touch screen and software commands. If you just bought a bracelet or pulled it out after a long break, you need to understand the physical principle of its battery.
A lithium polymer battery inside a tracker has the ability to self-discharge even when the device is not in use, which is why it is critical to ensure a steady flow of energy before the first start. In this guide, we will not only discuss the standard activation procedure, but also consider the complex cases when the indicator does not light up and the screen remains black.
The Mi Band 4 is a popular model that has proven to be a reliable tool for tracking activity. However, like any electronics, it requires the right approach to primary use. Ignoring basic charging rules can lead to the device going into a deep discharge from which it will be difficult to deduce using standard methods.
⚠️ Warning: Never attempt to disassemble a tracker capsule or puncture the battery unless the device is showing signs of life.Mechanical impact can cause fire or irreversible damage to electronics.
Preparation for the first launch and inspection of the completeness
Before you start activating, you need to make sure that all the components are available. The standard equipment Xiaomi Mi Smart Band 4 includes the tracker (capsule), a replacement strap and charger. the absence of at least one element can complicate the process. Charging cable is a specific connector that is inserted into the recess at the bottom of the capsule.
Look at the contacts on the tracker and on the charger. They should be clean, dry and without traces of oxidation. If you bought a used device or it was lying for a long time, a plaque could form on the golden pencils that prevents the passage of current. You can use soft tissue, slightly moistened with alcohol, but after that, make sure that the contacts are completely dry.
It is also important to check the condition. USB-It should not be shattered or dusted, but it should be powered by a standard power supply. USB-A computer port or smartphone charger with a current of no more than 1 Ampere. Using powerful fast charge units from flagship phones can be dangerous for a small battery tracker.
- 🔌 Make sure that the charging cable is securely inserted into the USB-feed-in.
- 🧼 Wipe the contacts on the capsule and charge with a dry soft cloth.
- 🔋 Use a power source with a voltage of 5V and current up to 1A.
⚠️ Warning: Do not use damaged cables or power supplies with broken insulation.Power surges can put Mi Band 4 power controller out of action forever.
💡
If you use Power Bank to charge, make sure it supports low current mode.Some powerful power banks automatically turn off, considering the bracelet a charged device, and do not transmit power.
The process of connecting to the charger
The most important step is to connect the capsule properly to the charging. On the bottom edge of the tracker there are two round recesses and contact pads. The charging cable has the appropriate protrusions (pins) that should enter these recesses. When connected correctly, you should feel a slight click or a tight fit.
After the device is physically connected to the power source, the Mi Band 4 should display a battery icon. If the screen catches fire and shows the charge level or animation of the connection, then the procedure was successful. In some cases, if the battery was completely empty, the image may not appear immediately, but after 5-10 minutes.
If the screen is not responding, try to move the capsule slightly while charging. Bad contact is the most common cause of problems. Make sure the charging ledges enter the recess to the point. Sometimes dust or pile that has accumulated in the grooves interferes. Gently blow the connector or use a toothpick to remove debris, but act very carefully.
☑️ Connection check
During charging, the indicator on the screen can flash or show the percentage of filling. The standard time for full charging of the Mi Smart Band 4 is about 1-1.5 hours. It is not recommended to leave the device on charging overnight or for more than 3-4 hours, although modern electronics have protection against overcharging, you should not risk battery life.
Solving problems with a discharged battery
The situation where Xiaomi Mi Band 4 does not turn on even after connecting to charging, is quite common.This can be the result of a deep discharge, when the voltage on the cell fell below a critical threshold, in which the power controller blocks charging for safety reasons.
To “swing” the battery, leave the device connected to the power source for a long time — from 30 minutes to 2 hours, even if the screen remains black. Low-power current passing through the battery can gradually raise the voltage to a level sufficient to activate the controller, during which time the screen may not light up at all, which is normal for a deep discharge.
If nothing happens after two hours of charging, try changing the cable or USB-Sometimes the problem is not the bracelet, but the source of the current, and you can also try to gently (without fanaticism) press the screen area while charging to check if the touch layer is stuck.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| Black screen, no vibration. | Deep battery discharge | Leave on charging for 1-2 hours |
| Blinking battery icon | Low charge level. | Continue charging to 100% |
| The screen lights up and goes out. | Poor contact or software failure | Reconnect the cable, clean the contacts |
| Vibration is there, the screen is not on. | Display malfunction | Contact the service center |
Can I charge the Mi Band 4 without the original charger?
Connection with a smartphone and installation of Mi Fit
Once the device has shown signs of life, you need to link it to the smartphone, which will require the Mi Fit app (or Zepp Life, since the app was renamed), download the program only from official Google Play stores or the App Store to avoid malicious modifications.
Install the app and register your account. Then turn on Bluetooth on your phone. In the app, click the add-on button and select the Mi Smart Band 4 from the list. The bracelet screen will show a pairing request (a Bluetooth icon) that you need to confirm by touching the sensor.
It is important to note that the connection should be through the application, not through the Bluetooth settings on Android or iOS. If you try to hide the bracelet directly through the phone’s system menu, the application will not be able to access the sensor data, and the device will be useless.
- 📱 Download the official Zepp Life app (Mi Fit).
- 🔑 Register or log in to your accaMi account.
- 🔍 Press Profile" → "Add the device".
- ✅ Confirm the pairing by pressing the bracelet screen.
The app will suggest updating the firmware during the setup process, an important step because the factory version of the software may contain bugs or have limited functionality. The firmware update often corrects autonomy issues and improves the accuracy of the pulsemeter.
⚠️ Warning: During a firmware update, do not disconnect the bracelet from your phone or leave the application. Interrupting the process can lead to a software failure, after which the device will cease to be identified.
Configure the main functions and interface
After successful inclusion and pairing, you will see the full functionality of Xiaomi Mi Band 4. The tracker interface is built on the basis of changeable dials and menus with icons. Touch screen is used for navigation: swipe up opens the menu, swipe down - notifications and settings panel, swipe left and right switches widgets.
In the settings menu, you can change the brightness of the screen, the time to damp backlight, the time format (12/24 hours) and the measurement unit (metric/imperial system), and Do Not Disturb mode is available here, which turns off the vibration of notifications at a predetermined time, such as at night.
One of the key features is health monitoring, and you can activate your pulse monitoring on a regular basis, which will increase your battery consumption, but provide more complete statistics, and you can also set your goals by step, calorie, and sleep time, all of which are synchronized with the app on your phone.
To personalize the look, you can download new dials. The Zepp Life app has an extensive library of free and paid designs. You can set photos from the gallery or choose an animated background, which will make the Mi Band 4 unique.
💡
Properly adjusting the brightness and screen time significantly prolongs the battery life, allowing the bracelet to be used for up to 20 days without recharging.
Frequent questions and maintenance
In the process of operation, users may face various questions regarding the operation of the device, for example, many are interested in water resistance. Mi Smart Band 4 has protection according to 5 ATM standard, which means that it is possible to immerse in water to a depth of 50 meters. However, this does not apply to hot water, steam or sea water for a long time.
To clean the device after training or bathing in salt water, it is recommended to wipe it with a soft moist cloth. Sweat and salt can irritate the skin or corrosion of charging contacts. Regular hygiene of the device is the key to long service and comfort of wearing.
If the bracelet has stopped responding to touch or has frozen, try restarting it. In the settings menu, find System or Reboot. If the screen is not working, you can use the reset function through the app on the phone (in the settings section of the device), which will return the gadget to the factory settings.
- 💧 Wash the case after contact with sweat or salt water.
- 🔄 Reboot your device once a month for stable operation.
- 🔋 Do not allow the battery to be completely discharged to zero during long-term storage.
Compliance with simple rules of operation will allow your fitness tracker to serve faith and truth for a long time.The device is designed for an active lifestyle and is ready to accompany you in any conditions, if you provide it with the right care and timely charging.