Why would you need to turn off your fitness bracelet?
The Xiaomi Smart Band 9 fitness bracelet is a device designed to work around the clock, but even such a gadget has situations when it needs to be completely turned off, for example, before long storage (to avoid draining the battery), in preparation for firmware or if the bracelet freezes and does not respond to touch. Some users also turn off the device overnight to avoid unnecessary notifications and extend the battery life.
Unlike smartphones, where the power button is always at hand, in Smart Band 9, the process of turning off is hidden in the menu. Moreover, the manufacturer does not advertise this feature - in the official instructions it is mentioned in passing. This leads to users wearing the bracelet for years without knowing how to turn it off correctly. In this article, we will analyze all the available methods, including emergency shutdown when hanging, and also explain how to avoid typical errors.
It's important to understand that simply removing the bracelet from your hand or turning off Bluetooth in your smartphone is not the equivalent of turning it off. The device will continue to work in the background, expending charge. A complete power outage is the only way to completely "put it to sleep."
Method 1: Turn off through the main menu of the bracelet
The most obvious and safe way is to use the built-in settings. Here's a step-by-step guide:
- Swipe your finger up the Smart Band 9 screen to open the main menu.
- Scroll down to the Settings (cog icon) and tap it.
- In the settings section, find the option to turn off (usually located at the bottom of the list).
- Confirm the action by tapping the OK button on the screen.
The bracelet will start the shutdown process, which takes about 5-7 seconds, the screen will go out, and the charging indicator (if the cable is connected) will stop flashing, a method suitable for routine shutdowns, for example, before a flight or a long trip.
Save training data in Mi Fitness| Turn off alarm clocks on the bracelet | Make sure the battery charge is > 10% (otherwise it may not turn on) | Remove the bracelet from your hand (to exclude accidental touches)
-->
If you decide to turn the bracelet back on after turning it off, simply plug it into the charger. the Smart Band 9 will automatically start when power appears - there is no separate power button.
Method 2: Forced button shutdown (when getting stuck)
Sometimes the bracelet will not respond to touch — the screen will not scroll, the menu will not open, and notifications will not come. In such cases, an emergency shutdown using a physical button will help. On the Smart Band 9, it is alone and located under the body (click on the area under the screen).
Algorithm of action:
- Remove the bracelet from your hand and place it on a flat surface with the screen up.
- Find a small indentation on the bottom of the case - this is a hidden button.
- Press and hold it for 10-15 seconds until the screen goes out.
This method works even if the bracelet is completely frozen, but it is not worth abuse: forced shutdown can lead to loss of unsynchronized data (for example, steps or pulse in the last hours).
💡
If the button doesn't work, try using a paper clip or toothpick to press it more accurately. Don't put too much effort into not damaging the case.
Method 3: Turning off via Mi Fitness
Few people know, but you can remotely disable the Xiaomi Smart Band 9 via the official Mi Fitness app (formerly Mi Fit), which is convenient if the bracelet is out of reach (for example, lying in another room) or if the touch screen is damaged.
Instructions:
- Open the Mi Fitness app on your smartphone and connect to the bracelet (if the connection is severed).
- Go to Profile → My Devices → Xiaomi Smart Band 9
- Tap the three-point menu (⋮) top-right.
- Select the option to turn off the device and confirm the action.
Note that this method only works if the bracelet is connected to the phone via Bluetooth and has a sufficient charge level (at least 5%).
Once a week | Only before long trips | Never turned it off | Only when it's hanging |Another option-->
Method 4: Discharge the battery before it is completely shut down
This is not a recommended method, but in some cases it becomes the only way out, for example, if the bracelet is frozen, the button does not work, and there is no charger at hand to force it to turn on.
To discharge the Smart Band 9 before automatically shutting down:
- 🔋 Activate all energy-intensive functions on the bracelet: a constant pulse, GPS (If any, maximum screen brightness.
- 📱 Disconnect it from your smartphone to avoid synchronization.
- ⏳ Leave in this state for 12-24 hours (depending on the current charge).
When the charge reaches a critical level (usually 1-2%), the bracelet will automatically turn off, the disadvantage of the method is the long wait and risk of a deep discharge, which can adversely affect the capacity of the battery.
What if the bracelet does not turn on after discharge?
Table: Comparison of shutdown methods
| Method | Difficulty | Time. | Suitable for | Risks. |
|---|---|---|---|---|
| Through the wristband menu | ⭐ | 10 seconds. | Scheduled shutdown | No. |
| Button (forced) | ⭐⭐ | 15 seconds | Hanging, lack of response to touch | Loss of unsynchronized data |
| Through Mi Fitness. | ⭐⭐ | 30 seconds. | Remote shutdown | Requires Bluetooth connection |
| Battery discharge | ⭐⭐⭐ | 12-24 hours | Extreme case (failed button/screen) | Deep discharge, battery damage |
Frequent Mistakes and How to Avoid Them
Many users experience problems when trying to turn off the Xiaomi Smart Band 9. Here are the most common mistakes and ways to solve them:
- 🔄 The bracelet does not turn off via the menu - make sure you have chosen the right item (Stop, not Reboot).If the option is inactive, you may need a firmware update.
- 🔋 After you turn off, plug it into a charger and wait 5-10 minutes. If the indicator doesn't light up, try another cable.
- 📱 Mi Fitness app doesn't see bracelet - restart Bluetooth on phone or reinstall app.
- ⚡ The button doesn't work -- make sure you press the button, not the touch screen. On the Smart Band 9, it's located below the display.
Critical information: If the bracelet does not turn on after forced shutdown with a button, do not try to disassemble it yourself. In 90% of cases, the problem is solved by long-term charging (2-3 hours) or resetting through the Mi Fitness application (Settings Reset section).
💡
Forced button shutdown is not a factory reset; it simply interrupts power without affecting user data.
How to properly store the off bracelet?
If you plan to not use the Xiaomi Smart Band 9 for a long time (for example, during vacation or when switching to another device), it is important to ensure the right storage conditions, which will help to preserve battery capacity and prevent damage to electronic components.
Storage tips:
- 🔋 Battery charge: Charge the bracelet to 50-60% before switching off, and storing it with a fully discharged or 100% charged battery reduces its lifespan.
- 🌡️ Temperature – Avoid areas with high humidity or extreme temperatures (optimum: 10–25)°C) Do not leave the bracelet in direct sunlight.
- 📦 Packaging - Put the bracelet in the original box or antistatic bag. avoid contact with metal objects.
- 🔄 Periodic start – if the bracelet is stored for more than 3 months, turn it on once a quarter for 10-15 minutes to prevent deep discharge.
If you keep the bracelet with the strap, loosen the clasp to avoid deformation of the silicone. For models with leather straps, it is recommended to store them separately from the body in a dry place.
💡
Before long-term storage, reset the bracelet to factory settings via Settings → Reset. This will clear the memory and prevent conflicts the next time you turn on.