How to turn on and connect headphones Xiaomi Mi True Wireless 2: full instruction

Xiaomi Mi True Wireless 2 wireless headphones have become a popular choice among users due to the combination of high-quality sound, compact design and affordable price. However, many owners have difficulties with the first inclusion and pairing of the device. This article will help you understand everything from basic activation to solving typical problems.

Unlike wired analogues, TWS-Headphones require the right sequence of actions to work correctly, and we will take a detailed look at not only the standard on-board process, but also alternative methods of connection, and also give recommendations for optimizing the operation of the device.

Preparation for first inclusion

Before you first use Mi True Wireless 2, you need to follow several important steps, which will help avoid typical errors and ensure stable operation of the device.

First, make sure you have a sufficient charge level. The charge case must be at least 30% charged, and the headphones themselves at least 10% charged. To check the charge level, use the indicators on the case: white light means high charge, orange means medium, red - low.

• 🔋 Check the charge of the case and headphones
• 📱 Prepare a smartphone with Bluetooth enabled
• 🎧 Remove the headphones from the case
• 📌 Make sure there is no physical damage.

Pay special attention to the condition of contacts on headphones and in the case. Pollution or oxidation of contacts can lead to problems with charging and switching on. If necessary, gently clean the contacts with dry soft cloth.

💡

To check the level of charge of the headphones, you can use the Mi Home or Xiaomi Wear app, if they have already been paired before.

Standard way to turn on headphones

The process of turning on Mi True Wireless 2 is as simple as possible by the manufacturer.

1. Open the charge case cover.
2. Remove both earphones from the nests
3. Wait 3-5 seconds – the headphones will automatically turn on
4. Wait for the beep and flashing indicators

Once removed, the headphones should automatically go into pairing mode, as evidenced by the flashing white light on both devices. If this does not happen, try to return the headphones to the case and re-extract them.

Headphones emit an audible signal|The indicators flash white.|Headphones are defined in the list of Bluetooth devices|The sound is played synchronously in both headphones.-->

In the future, to reconnect to the new device, you will need to reset the settings.

Connecting to a smartphone via Bluetooth

Once the headphones are successfully turned on, you need to pair them with a smartphone, and the process may vary slightly depending on the phone model and the version of the operating system.

For Android devices:

1. Open Settings → Bluetooth
2. Activate Bluetooth if it is turned off
3. In the list of available devices, find Mi True Wireless Earphones 2
4. Click on the name of the device for pairing
5. Confirm the connection if a request appears

For iOS devices:

1. Go to Settings → Bluetooth
2. Make sure that the detection mode is on
3. In the "Other Devices" section, find Mi True Wireless Earphones 2
4. Press "Connect"
5. Wait for the coupling process to be completed

Once paired successfully, the headphones will automatically connect to the smartphone when removed from the case.In some cases, confirmation of connection may be required when first used.

Solving problems with inclusion and connection

If the Mi True Wireless 2 headphones aren’t enabled or defined by the device, try the following problem-solving methods:

• 🔄 Perform a reset of headphone settings
• 🔋 Check the charge level of the case and headphones
• 📱 Reboot your smartphone
• 🔌 Try another one. USB-charger

To perform the resetting of settings:

1. Put both headphones in the case
2. Open the case lid.
3. Press and hold the button on the case for 10-15 seconds.
4. Wait for the red and white lights to flash.
5. Remove the headphones and try to connect again.

⚠️ Warning: After resetting all previous pairings will be removed. Headphones will return to factory settings and will be ready for a new connection.

If the problem persists, try connecting the headphones to another device to help determine if the problem is with the headphones or your main device.

Optimization of headphones

To improve sound quality and increase battery life, follow these guidelines:

• 🎵 Use codecs. AAC Or aptX for better sound.
• 📴 Turn off Bluetooth when the headphones are not in use
• 🔋 Regularly charge the case, not allowing a full discharge
• 🎧 Clean headphones and case from dust and pollution

In the Mi Home or Xiaomi Wear app, additional settings are available:

1. Setting up sensor control
2. Firmware update
3. Checking the level of charge
4. Equalizer setting

An important feature of Mi True Wireless 2: headphones support low latency mode, which can be activated in Bluetooth settings on Xiaomi devices with MIUI 12 and later. This is especially useful for watching videos and games.

💡

Regular firmware updates through the official Xiaomi app improves the stability of work and adds new features.

Update of the headphone firmware

The manufacturer regularly releases firmware updates for Mi True Wireless 2, which improve stability and add new features.

1. Install the Mi Home or Xiaomi Wear app
2. Connect the headphones to the smartphone
3. Open the app and find your headphones in the list of devices
4. Go to the updates section
5. If an update is available, follow the instructions on the screen.

The update process usually takes 2-5 minutes.

• Don't remove the headphones from the case
• Don't close the case lid.
• Don’t interrupt the update process.
• Make sure you have a stable internet connection

⚠️ Attention: Interrupting the firmware update process may cause the headphones to be unstable or completely inoperable.

After a successful upgrade, the headphones will automatically restart. It is recommended to check the operation of all functions after installing the new firmware.

Comparison with other Xiaomi models

For a better understanding of the capabilities of Mi True Wireless 2, it is useful to compare them with other popular models of wireless headphones from Xiaomi:

The Mi True Wireless 2 sits in the middle between the budget and flagship models, offering a balanced value for money and will suit most users who are looking for reliable wireless headphones without overpaying for additional features.

FAQ: Frequently Asked Questions