Modern wearables have become an integral part of the lives of millions of users, and the Xiaomi Smart Band 8 is no exception. This activity tracker offers advanced health monitoring features, stylish design with the ability to mount in various variants and an improved AMOLED screen. However, the owner of a new device always faces the first and most important question: how to properly activate the gadget so that it works without failures and errors.
The process of first turning on the Xiaomi Smart Band 8 may seem simple, but there are a number of nuances that are often overlooked: Incorrect sequence of actions or ignoring the preparatory stages can lead to the fact that the device will not turn on, will not be visible to the phone or quickly discharge.
It is important to understand that activating a fitness bracelet is not just a button press, but a complex process of setting up the software. We will consider working with protective films, charging features before first use and the subtleties of connecting through the Mi Fitness application. Following the instructions will allow you to avoid common mistakes and immediately start to enjoy all the features of your new gadget.
Preparation of the device for the first launch
Before you try to turn on the Xiaomi Smart Band 8, you need to conduct a thorough visual and physical preparation of the device. When unpacking, you will find that the tracker capsule is tightly inserted into a protective foam or cardboard frame, and its screens on both sides are closed with special transport films. These films not only protect the glass from scratches, but also block the touchscreen, so removing them is a must.
Carefully inspect the case for visible damage or cracks that may have occurred during delivery.The touch screen should be clean and smooth, without foreign particles under the protective glass.If you notice defects, it is better not to turn on the device, but to contact the seller for replacement, as the operation of the damaged gadget may be unsafe.
⚠️ Warning: Do not attempt to turn on the bracelet without removing protective films on both sides of the case.This can lead to sensor malfunction and false pressing, as well as make it difficult to assess the quality of the display image.
Special attention should be paid to the charging contacts located on the inside of the capsule, they should be dry and clean. If the contacts show signs of oxidation or contamination, gently wipe them with dry soft cloth. The magnetic connector should be freely magnetized to the housing, providing a reliable contact for power supply.
Many users mistakenly believe that the new device is always fully charged.In fact, the lithium polymer batteries used in the Xiaomi Smart Band are the only ones that are fully charged. 8, They may have a residual charge, but it is often not enough to fully work and adjust. Therefore, it is highly recommended to put the gadget on charge at least on the right time before turning on. 15-20 minute.
☑️ Preparation of Xiaomi Smart Band 8 for inclusion
The process of switching on and primary activation of the screen
Once the device is ready and slightly recharged, you can go directly on. Unlike smartphones, Xiaomi fitness bracelets often do not have a physical on button on the case. Activation occurs automatically when you connect to a power source or when you first pair with an application on your smartphone, this is done to save energy and reduce the design.
If you plug the bracelet into the charging cable, the screen should light up automatically. MI Xiaomi, and then the start menu will open with a suggestion to choose a language or scan. QR-In some cases, if the battery is completely discharged, the screen may not immediately light up. 30-40 minutes without trying to force it on.
There's also a software method for activating through the app. If the screen doesn't respond to charging, try installing the official Mi Fitness app on your smartphone. Once you register your account and turn on Bluetooth on your phone, the app will start searching for nearby devices. Once it detects your bracelet, a pairing request will appear on the screen, which will actually trigger the device.
What to do if the screen does not light up?
It is important to note that the primary activation requires a battery charge of at least 10-15%. If the charge indicator shows a red color or flashing battery, the device may not work stable.
Installation and configuration of the Mi Fitness application
The key element of the Xiaomi ecosystem is software. To work Xiaomi Smart Band 8 you will need the application Mi Fitness (formerly known as Zepp Life for some models, but for the 8th version you need Mi Fitness). You can download it from Google Play Store for Android or App Store for iOS. Make sure you download the official application from the developer "Xiaomi Inc.".
Once you install the app, you need to create a Xiaomi account or log in to an existing one, which is a mandatory requirement for synchronizing data and storing statistics in the cloud, and when registering, specify the correct data, since the availability of certain features and language packs for the bracelet may depend on the region of the account.
Inside the application, go to the "Profile" section and select the "Add Device" option. QR-the code that is displayed on the screen of the bracelet, or select a device from the list of found. Bluetooth on the smartphone should be enabled, and geolocation is activated, as it is required for the operation of the device search protocol on Android.
| Parameter | Requirement/Recommendation | Note |
|---|---|---|
| Operating system | Android 6.0+ / iOS 12.0+ | Older versions of the OS may not support the application |
| Annex | Mi Fitness | Not to be confused with Zepp Life or Mi Fit |
| Internet | Required for the initial setup | For data synchronization |
| Bluetooth | Version 5.0 and higher | For stable connection |
| Permits | Geolocation, Notifications | Necessary for tracking and notifications |
Updating the software when you first turn on is a critical step, as the version may contain bugs or not support all the features claimed for the Smart Band 8 model.
⚠️ Warning: Do not open the bracelet settings menu or try to use it actively during firmware updates, this can lead to data packet desynchronization and installation error, which will require a repeat of the procedure.
Configuring and configuring notifications
After a successful update and pairing, the personalization phase begins. Xiaomi Smart Band 8 allows you to flexibly configure notifications from various applications. From the Mi Fitness app menu, go to Notifications and Vibration. Here you can choose which apps will duplicate your messages on your wrist.
For Android, it is important to give Mi Fitness all the permissions you request. Without permission to access notifications, the bracelet will not be able to display messages from WhatsApp, Telegram or SMS. On iOS (iPhone), the process is simpler, but also requires confirmation in Bluetooth system settings and in the app itself.
- 📱 Social networks: Select the messengers from which you want to see notifications (Telegram, WhatsApp, Viber).
- 📞 Calls: Turn on incoming calls to see the name of the caller on the bracelet screen.
- 📧 Email and more: Set up the display of emails and notifications from other system applications.
You can also pay attention to the vibration settings, so you can choose the vibration strength and the time when the notifications will not disturb (Do Not Disturb mode), which is especially useful for maintaining the device’s autonomy and your peace of mind at night.
💡
Set up a Do Not Disturb schedule right in the app so that the bracelet doesn’t vibrate during sleep or important meetings, even if the phone is in silent mode.
Health and sports regimes setting
The tracker's function goes beyond notifications, and its primary function is to monitor health, and when you first run it will ask you to input your anthropometric data: height, weight, age and gender, which is necessary to correctly calculate calories, steps and pulse zones, and enter accurate data, because the accuracy of all the algorithms depends on it.
In the Profile or Health section, you can adjust the frequency of monitoring pulse and blood oxygen (SpO2). For maximum accuracy, it is recommended to set automatic heart rate monitoring at intervals of 10 or 30 minutes.
It’s important for athletes to set up sports profiles. Xiaomi Smart Band 8 supports more than 150 workout modes. In the app, you can add frequently used activities to your favorites list to quickly find them on your bracelet.
⚠️ Note: The health data provided by the bracelet are reference and not a medical diagnosis. Do not use the bracelet to make medical decisions without consulting your doctor.
Don't forget to check the sensors. Take a few minutes or do a few squats to make sure your steps are fixed and your pulse is displayed correctly. If the data seems incorrect, try zipping your strap tighter or re-mounting your wristband higher.
Solving problems with inclusion and connection
Even if you follow all the instructions, users can run into difficulties. One of the common problems is that the bracelet doesn't turn on or respond to charging. In this case, check the integrity of the charging cable and the power supply. Try connecting the device to a computer port or other adapter. Sometimes cleaning the contacts with an alcohol napkin helps.
Another common situation is that the phone doesn't see the bracelet when searching. Make sure the bracelet isn't connected to another phone. Xiaomi Smart Band 8 can only pair with one device at a time. If you've previously tried to connect it to another smartphone, you need to untie the device in the app on that phone or reset the brace itself.
- 🔄 Reboot: Try restarting your smartphone and bracelet (via the settings menu).
- 📶 Bluetooth: Turn off and turn on Bluetooth on your phone, make sure you don’t search for other devices.
- 🗑️ Remove: Remove the device from the Bluetooth list in your phone’s settings and try to find again through the app.
If nothing works, you may need a full reset. On the bracelet, go to Settings → System → Reset (or similar). Once reset, the device will return to factory settings and you can configure it as new.
💡
Most connectivity problems are solved by completely uncoupling the device in the app on the old phone and clearing the cache of the Mi Fitness app on the new one.