The first launch of the Xiaomi Mi Band 1 fitness tracker may seem mysterious, since the device lacks physical control buttons. This minimalist solution provides protection from water and dust, but creates certain difficulties for beginners. To activate the gadget, you need to perform a series of sequential actions, from removing the capsule from the strap to pairing with a smartphone.
Many users experience a situation where the device does not respond to touch immediately after unpacking.This is normal, since trackers are often stored in warehouses with discharged batteries to save their life. Initial charging is a critical step, without which subsequent settings are impossible.
In this article, we will take a closer look at the process of revitalizing your fitness bracelet, look at the nuances of working with the capsule and answer frequent questions, following the instructions will avoid common mistakes and quickly move to tracking physical activity.
Capsule extraction and visual inspection
The device consists of two main parts: a silicone strap and a plastic capsule that contains all the electronics. To start, you need to remove the tracker from the frame, and you should do this carefully by pushing the module from the back of the strap so that you do not damage the silicone or the body.
Carefully inspect the golden charging contacts on the end of the capsule. They should be clean and dry. If you see oxidation or contamination, gently wipe them with dry soft cloth. The presence of moisture or dirt can interfere with normal energy flow.
Notice the convex side of the module. This is where the touch element is located, which responds to finger touch, and on the other side is the Mi brand logo, which sometimes glows at certain events, but when it's off, it stays dark.
⚠️ Note: Do not use sharp objects to remove the capsule from the strap, so as not to penetrate the silicone and not damage the internal tightness of the device.
💡
Before mounting back into the strap, make sure the bulging side of the sensor is pointed upwards toward your skin, otherwise the tracker will not be able to read your pulse and steps.
Primary charge of the device
Once removed from the package, the battery is often critically low. Connect the capsule to a special charger that came with the kit. Contacts on the charger and on the bracelet should be tightly in contact.
The status indication is usually displayed by three LED dots, which can flash or burn with even light during charging, and when all three lights are lit at the same time, it means that the battery is fully charged and ready to go.
If the lights don't light up, try changing the position of the capsule slightly on the charger or rubbing the contacts with an alcohol wipe. Sometimes the oxide film on the metal prevents contact, and removing it solves the problem.
☑️ Checking charging
How long do you need to charge?
Connection to a smartphone and installation of software
To make the tracker work properly, you need a companion app. Early versions used the Mi Fit app, which was later renamed Zepp Life. Download the current version from the official Google Play store or the App Store.
Launch the app and register your Xiaomi Account. Without authorization, data synchronization is not possible. After logging in, go to your profile and select the option to add a new device.
Turn on Bluetooth on your smartphone. The app will start looking for available gadgets. When the name of your bracelet appears on the screen, tap on it to pair. The process can take a few seconds.
| Parameter | Meaning/Description | Importance |
|---|---|---|
| Operating system | Android 4.4+ / iOS 8.0+ | Tall. |
| Bluetooth version | 4.0 and higher | Critical |
| Annex | Zepp Life (Mi Fit) | I'll be sure. |
| Internet | Required for registration | Medium |
Sensor activation and testing
Once you've paired it successfully, you need to check the touch button, and you need to touch the convex surface of the module with your finger, and if the device is charged and working, one of the LEDs should catch fire.
Single tap usually shows the current time or charge level.Double tapping or long finger holding can switch display modes or activate phone search, depending on the settings in the app.
If the sensor is not responding, try unlocking the smartphone screen and opening the app, sometimes requiring confirmation of activity from the mobile device via a Bluetooth signal for the first time.
⚠️ Note: The sensor may not work if the bracelet is in power saving mode or if too much time has passed since the last synchronization.
Make sure the vibration is on. In the app, find the alarm settings or reminders and set the test event. The bracelet should vibrate at the designated time, alerting the wearer.
Set up the main functions of the tracker
A wide range of settings is available in the app menu, and it is recommended to set a step goal, which is 10,000 by default, but can be changed depending on your physical fitness.
You can also set up notifications, and you can let the bracelet vibrate when you call in, SMS It's a way to keep things from happening, even if the phone's in the bag.
For the accuracy of sleep and activity data, it is important to correctly indicate height and weight in the user profile, which are used by algorithms to calculate calorie expenditure and step length.
💡
Properly entered anthropometric data (height, weight, age) are critical for accurate calorie and distance calculations.
Solution and resetting of settings
If the bracelet has stopped responding or has frozen, a forced reboot may be required. Since there is no button, it uses a discharging method. Leave the device connected to charging or just wait until the battery runs out completely.
Once fully discharged, put the bracelet on charge again. When turned on, it should reset errors and earn regular. The application also has Unlink feature, which helps with connection problems.
Sometimes the problem lies in the smartphone itself: Rebooting the phone’s Bluetooth module or removing the old device from the paired list often solves the problem of lack of communication.
⚠️ Warning: Do not attempt to open a plastic battery replacement capsule yourself.This will disrupt water protection and will almost certainly cause electronics to break down.