Bluetooth on the Xiaomi 1S scooter: how to turn on and configure a connection with a smartphone

The Xiaomi Electric Scooter 1S is a popular model among urban dwellers that combines compactness, power and smart features. One of the key features of the device is Bluetooth support, which allows you to control the scooter through a mobile application, track trip statistics and update firmware. However, many users face difficulties when connecting first — especially if you have not previously dealt with Xiaomi smart appliances.

In this article, we will discuss how to correctly turn on Bluetooth on the Xiaomi 1S scooter, connect it to a smartphone and configure work with the official Mi Home or Xiaomi Scooter application. You will also learn what errors can occur in the process and how to eliminate them without contacting the service center.

Why Bluetooth on the Xiaomi 1S scooter may not work?

Before we get into the setup, it’s important to understand why a Bluetooth module sometimes refuses to turn on or isn’t detected by a smartphone.There are several reasons, and most of them are due to software failures or incorrect sequence of actions.

First, the Xiaomi 1S scooter has an energy-saving mode that shuts down Bluetooth during prolonged downtime (more than 5 minutes without movement). Second, the module can be locked after failed attempts to connect or reset settings. Finally, problems often arise from outdated firmware of the scooter or mobile application.

• 🔋 Battery discharge: At a charge level below 10%, Bluetooth automatically deactivates.
• 📱 Mi Home app version below 6.0 may not support the model 1S.
• 🔄 Resetting: After resetting the scooter through Power + Mode requires re-binding.
• 🛠️ Hardware malfunctions: damage to an antenna or controller (rare but possible).

If your scooter was successful before, but now Bluetooth is not turning on, try rebooting the device: turn it off with the Power button, wait 30 seconds and turn it on again, which solves the problem in 70% of cases.

Preparation of the Xiaomi 1S scooter for connection

Before you activate Bluetooth, make sure the scooter is ready to pair.

1. Battery charging: the charge level should be at least 20%, with a lower value, the system can block power-intensive functions, including Bluetooth.
2. Scooter turn on: Press and hold the Power 2 button for a second until the lights light up.
3. Indicator check: The control panel should flash a blue LED - this is a signal of readiness for pairing.

If the blue light doesn’t flash, try force activating the connection mode:

1. Turn off the scooter.
2. Press the Power button and the Mode button for 5 seconds at the same time.
3. Release the buttons when the blue LED flashes.

Note: if the scooter was previously tied to another smartphone, it must be disconnected from the previous device via Bluetooth settings or reset the binding in the Mi Home app. Otherwise, a new connection will not be possible.

Step-by-step: how to turn Bluetooth on Xiaomi 1S

Now, let's get to the main process. Follow the instructions strictly in steps to avoid mistakes:

1. Activate Bluetooth on the scooter: Turn on the scooter with the Power button. Make sure the blue light flashes (if not, reset as described above).
2. Install the app: Download Mi Home (for iOS/Android) or Xiaomi Scooter (alternative software). Register or sign in to Xiaomi account (required!).
3. Start pairing: Open the app and click Add Device (+). Select Transport → Scooter category. In the list, find Xiaomi Electric Scooter 1S and tap on it.

Confirm the connection.

• The scooter will sound a beep, and the indicator will burn blue constantly.
• The application will appear a request for binding - confirm it.

If at the interface stage there is an error "Can not connect", try:

• 🔄 Reboot the scooter and smartphone.
• 📱 Remove the scooter from the list of Bluetooth devices in the phone settings and try again.
• 🔧 Update the firmware of the scooter through the application (if available).

Bluetooth settings in the Mi Home app

Once successfully connected, you need to adjust the connection parameters in the application, which will avoid accidental communication breaks and optimize the operation of the scooter.

Open Mi Home, select your Xiaomi 1S and go to Settings → Bluetooth.

Important: If the Bluetooth Update is missing from your settings, your firmware is outdated. Update it through the firmware menu → Check for updates in the app.

For stable operation, it is also recommended:

• 📵 Disable the mode "Saving charge" on the smartphone during trips.
• 📶 Make sure your phone is on mobile internet (needs to synchronize data).
• 🔄 Update the Mi Home app regularly through Google Play or App Store.

Common mistakes and their elimination

Even if you follow the instructions correctly, users sometimes encounter problems. Let's consider the most common mistakes and ways to solve them:

⚠️ Warning: If after several unsuccessful attempts to connect the scooter stopped responding to the buttons, perform a hard reset: press the Power. + Mode + Brake for 10 seconds. That'll bring back the factory settings, but it'll delete all the data stored.

If none of these methods helped, check:

• 🔌 Battery status: At low charge (less than 10%), Bluetooth may not work properly.
• 🛡️ Antivirus on a smartphone: some programs block the connection with the scooter.
• 📡 Interference from other devices: in crowded places (metro, shopping centers) signal may be lost.

💡

If the scooter is connected but the data is not synchronized (for example, the mileage is not updated), try removing it from the application and adding it again.

Update firmware via Bluetooth

One of the key benefits of Bluetooth connectivity is the ability to update the firmware of the scooter without using cable, which is especially true for the Xiaomi 1S, as new versions of the software improve communication stability and add features (for example, support for ANC to reduce engine noise).

To update the firmware:

1. Connect the scooter to the smartphone via Bluetooth.
2. Open Mi Home, select your 1S and go to Settings → Firmware Update.
3. If a new version is available, click Download and Install.
4. Wait for the process to be completed (the scooter will emit a long beep).

Important: During the update:

• 🚫 Don't turn off the scooter.
• 📵 Do not interrupt the Bluetooth connection.
• 🔋 Make sure the battery is above 30%.

Following a successful update:

• 🔄 Reboot the scooter (turn off and turn on).
• 📱 Check the firmware version in the application (Settings) → Scooter).
• 🎧 If necessary, re-interface Bluetooth pairing.

Alternative ways to control without Bluetooth

If Bluetooth on your Xiaomi 1S doesn’t work for technical reasons (e.g., a module is damaged), you can still use a scooter, but with limitations:

• 🚀 Mechanical control: throttle, brake and mode switching (Eco/Sport) work without connection.
• 🔋 Battery indication: charge level is displayed on the control panel (4 LEDs).
• 🔧 Manual setting: brake stiffness and throttle sensitivity are controlled by screws (see scooter instructions).

Without Bluetooth, you will lose access to:

• 📊 Travel statistics (mileage, speed, energy consumption).
• 🔄 Firmware updates.
• 🛠️ Error Diagnostics (fault codes are only displayed in the application).

If Bluetooth is critically needed but does not work, contact Xiaomi’s service center for a module diagnosis. The cost of repairs usually does not exceed 1,500–2,000 rubles (2026).

💡

Bluetooth on Xiaomi 1S is not only for convenience - without it, you can not update the firmware and diagnose malfunctions. If the module fails, we recommend that it be restored, especially if the scooter is warranted.

FAQ: Frequent questions about Bluetooth on Xiaomi 1S