How to Manage Xiaomi Wireless Headphones: From Connection to Hidden Features

Xiaomi wireless headphones are not just an accessory for listening to music, but a full-fledged gadget with dozens of features that many users do not even know about. GT6) Xiaomi Buds 4 Pro, FlipBuds Pro 2 – each pair of headphones offers unique gesture, voice and mobile-based controls, but without the right setup, you risk only 20 percent of the device’s potential.

In this article, we will look at all the ways Xiaomi headsets can be managed, from basic Bluetooth connectivity to fine-tuning touch commands, activating transparency mode and synchronizing with the Mi Home ecosystem. We will focus on the typical problems of why one headphone stops working, how to reset to factory settings and what to do if the headphones are not determined by the phone. If you just bought a new model or have been using the old one for a long time, but want to maximize its capabilities, this guide is for you.

1. Basic connection of Xiaomi headphones to a smartphone

The first step is to sync your headphones to your device, and the process may vary slightly depending on the model, but the overall pattern is the same for everyone. TWS-Important: Make sure the headphones are charged before you connect (the indicator should flash white or green when removed from the case).

For most models (Redmi Buds 3 Lite, Xiaomi Buds) 3T And newer, this algorithm:

1. Open the charge case cover – the headphones will automatically go into pairing mode (indicators will start flashing red and white).
2. On your smartphone, turn on Bluetooth (Settings) → Connected devices → Bluetooth).
3. In the list of available devices, find the name of your model (for example, Mi True Wireless Earphones 2) and tap on it.
4. Confirm the pairing - some models will need to enter PIN-code (usually 0000 or 1234).

If the headphones don’t appear in the list, try:

• 🔄 Reboot Bluetooth on your phone (turn off and turn on the module again).
• 📱 Update the firmware of the headphones through the Mi Earphones app (available on Google Play and App Store).
• 🔋 Check the charge of the case - if the indicator does not burn, connect the case to charge for 10-15 minutes.

⚠️ Note: Xiaomi headphones can automatically connect to the last used device. If they do not connect to the new smartphone, reset their settings (press the button on the case for 10-15 seconds before flashing the red indicator).

2.Gestural control: which commands the headphones support

All modern. TWS-Xiaomi headphones are equipped with touch panels that respond to touch.The standard set of gestures usually includes:

• 🎵 One touch - playback/pause.
• 🔀 Double touch – transition to the next track (on the right earpiece) or the previous one (on the left).
• 📞 Triple touch – call the voice assistant (Google Assistant, Siri or XiaoAI).
• 🔇 Hold 1-2 seconds – turn off / turn on the microphone during the call.

However, some models (such as the Xiaomi Buds 4 Pro) offer advanced gestures such as:

• 👆 Swipe up/down - Volume adjustment.
• 🔄 Double-touch with retention - switching noise reduction modes (ANC/transparent).

To change the purpose of the gestures:

1. Open the Mi Earphones app (download it if not already installed).
2. Connect the headphones to the app (they should appear on the home screen).
3. Go to Touch Management and select the right commands for each gesture.

On models with support LDAC (For example, FlipBuds Pro 2, gestures can be customized separately for music and calls, which is convenient if you often use headphones to talk on Zoom or Discord.

⚠️ Attention: If gestures don't work, check if the cover or dirt is blocking the touchpad. Wipe your headphones with a dry wipe and try again. On Redmi Buds 3 Pro and older, the sensors are located on the outside of the case - don't cover them with your fingers when you touch them.

3. Sound setting: equalizer, noise cancellation and transparent mode

One of the key advantages of Xiaomi headphones is flexible audio settings. Even budget models (Redmi Buds 4 Active) support the basic equalizer, and flagship (Xiaomi Buds 4 Pro) - adaptive noise cancellation (ANC) transparency regime.

To tune the sound:

1. Open the Mi Earphones app and connect the headphones.
2. Go to the Sound or Equator section.
3. Choose one of the pre-profiles (Bases, Vocals, Classics) or create your own by hand.
4. For models with ANC Activate noise cancellation in the Sound Modes section and select the intensity level (e.g., Weak, Medium, Strong).

Transparency Mode is useful if you want to hear ambient sounds (such as in a vehicle or on the street).

• 🎧 On models with touch control – hold the touch panel on one of the headphones for 2 seconds.
• 📱 Through the app – go to Sound Modes → Transparent mode.

Xiaomi Buds 4 Pro headphones automatically switch levels ANC depending on the surrounding noise (for example, in the subway activates maximum suppression, and in the office – the average), this feature works only when connected to smartphones Xiaomi, Redmi or POCO firmware MIUI 13+.

💡

If noise reduction is too aggressive and creates a feeling of "pressure" on the ears, try to reduce the level of noise. ANC in settings or enable the "Adaptive" mode - it softly adjusts to the environment.

4.Voice control and integration with XiaoAI

Headphones Xiaomi supports voice assistants – both standard (Google Assistant, Siri), and branded XiaoAI. The latter is available only on smartphones with a smartphone. MIUI It allows you to control not only music, but also other devices of the Mi Home ecosystem (for example, turn on light bulbs or check the weather).

To activate voice control:

1. Put on your headphones and make sure they are connected to your smartphone.
2. Say a voice command (such as “OK, Google” or “Hello Siri”) or make a gesture (usually a triple touch).
3. For XiaoAI, pre-enable the assistant in your phone settings (Settings) → Annexes → XiaoAI → Auto-start).

Examples of XiaoAI teams:

• 🎶 "Turn on Music – Launch of the Last Listened Track.
• 🔊 "Increase volume by 30% – adjusting the sound.
• 💡 "Turn on the light in the living room" - control of the smart home (requires connected devices Mi Home).
• 📅 "What is the weather tomorrow? - Weather forecast.

If the voice assistant does not respond:

• 🔄 Check if you have microphone access enabled for XiaoAI or Google (Settings) → Annexes → Permits).
• 📱 Update the firmware of headphones and smartphone.
• 🎤 Make sure the microphones are not contaminated (clean them with a soft brush).

⚠️ Note: Xiaomi headphones with support LDAC (For example, FlipBuds Pro 2 may experience delays when using voice control when using a high-quality audio codec at the same time. AAC or SBC Bluetooth.

5.Sync with the Mi Home ecosystem and smart home

If you have other Xiaomi devices (such as smart lamps, robot vacuum cleaners or sensors), the headphones can be integrated into the Mi Home ecosystem.

• 🔊 Automatically mute music when calling on a smartphone.
• 🚪 Receive voice notifications from sensors (for example, if the door is open).
• 💤 Turn on the "Do Not Disturb" mode on headphones when activating the "Sleep" script in Mi Home.

To connect the headphones to the Mi Home:

1. Install the Mi Home app and log in.
2. Open the Profile tab → Settings → Devices with Mi support AI.
3. Find your headphones on the list and add them to the ecosystem.
4. Create automation in the Scenarios section (for example, "If headphones are connected" → light up%").

Example of useful automation:

Condition: Headphones connected to the phone


Send a notification to the smart watch Xiaomi Watch 2 Pro with the text “Hearphones are active”

Limitations of integration:

• 📱 It only works on smartphones with MIUI 12+.
• 🔄 Some features (such as voice notifications) require a connection to the Chinese Mi Home server (switch region in the app settings).

💡

Integration with Mi Home allows you to use headphones not only for music, but also as part of the smart home system – for example, to control voice devices or receive notifications.

6. Troubleshooting: What to do if the headphones don't work

Even the most reliable headphones can fail, so let's look at the typical problems and the ways to solve them.

Problem 1: One earphone doesn't connect or play sound

Reasons:

• 🔋 The battery is discharged in one of the headphones.
• 📡 Problems with synchronization between headphones.
• 🔊 Contamination of speaker or microphone.

Decision:

1. Place both headphones in the case for 30 seconds, then remove.
2. Reset the settings (press the button on the case for 10-15 seconds before the red indicator flashes).
3. Clean the speaker grid with a soft brush (do not use sharp objects!).

Problem 2: Headphones are not defined by the phone

Reasons:

• 📱 Outdated firmware headphones or smartphones.
• 🔄 Conflict with other Bluetooth devices.
• 🔋 Fully discharged case.

Decision:

• 🔄 Reboot Bluetooth on your phone.
• 📱 Remove the headphones from the list of associated devices and connect again.
• 🔋 Charge the case for 10-15 minutes, even if the indicator does not burn.

Problem 3: Poor sound quality or communication breaks

Reasons:

• 📶 Weak Bluetooth signal (much interference or long distance to the phone).
• 🔊 Incorrect audio codec (for example, LDAC jamming).
• 📱 Competition with other wireless devices (Wi-Fi, microwave).

Decision:

1. Switch to codec. AAC or SBC Bluetooth.
2. Reduce the distance between the phone and headphones (optimally, up to 1 meter).
3. Turn off other wireless devices (e.g. 2.4GHz Wi-Fi).

⚠️ Note: If after updating the firmware headphones began to work worse (for example, wheezing or sound delays), try rolling back the firmware through the Mi Earphones app. → Update of the PO → Reverse (not available for all models).

7. Reset settings and update firmware

If the headphones are starting to work unstable, it helps to reset to factory settings or update the firmware. Let's consider both processes.

Resetting settings

For most Xiaomi models, the algorithm is as follows:

1. Put both headphones in the case and close the lid.
2. Open the lid and hold the button on the case (usually located behind or below) for 10-15 seconds until the indicator flashes red and white.
3. Close the lid, then open it again - the headphones will go into pairing mode.

For models without a physical button (e.g. Xiaomi Buds 4 Pro):

1. Remove the headphones from the case.
2. Touch and hold the touchpads on both headphones for 10 seconds until you hear the beep.

Firmware update

The firmware affects the stability, sound quality and features it supports, so that you can update it:

1. Install the Mi Earphones app.
2. Connect the headphones to the phone via Bluetooth.
3. Open the app – if an update is available, a notification will appear.
4. Press Update and wait until the process is complete (don’t turn off the headphones!).

If the update is hanging:

• 🔄 Close the application and restart it.
• 📱 Reconnect the headphones.
• 🔋 Make sure the charge of the case is not lower than 30%.

FAQ: Frequent questions about Xiaomi headphones