Synchronizing Xiaomi smart watches with Android via Bluetooth: the complete guide

Xiaomi smartwatches have become an integral part of the gadget ecosystem for active users. They help track health, manage notifications and even replace a smartphone in some scenarios. However, many owners face difficulties when connecting a device to an Android phone using Bluetooth for the first time. This article will help you understand all the nuances of synchronization, avoid typical errors and customize the watch for maximum efficiency.

The connection process seems simple only at first glance, and in practice users often face problems such as “the device is not located”, “the connection is constantly broken” or “notifications are not coming”. We will analyze not only the basic connection procedure, but also consider the unique features of firmware. MIUI For different watch models that can affect the stability of the work.+ — This is the key to the correct synchronization.

Preparing devices before synchronization

Before you start connecting, make sure both devices are ready to interact. Start by checking compatibility: the majority of modern Xiaomi smartwatches (Mi Band, Amazfit, Watch series) S1/S2) Android supports 6.0 and above, but for full work, the version is recommended at least lower 8.0. This is especially important for models with NFC voice assistant.

On the phone, it is mandatory:

• 📱 Update the operating system to the latest version (check in Settings) → System system → Update of the PO)
• 🔄 Enable Bluetooth in the Quick Settings Panel or through Settings → Connected devices
• 📲 Make sure there is enough free space on the phone (minimum 500MB for installing the app)
• 🔋 The charge of the watch should be at least 50% – this will prevent failures during the initial setup.

💡

If you are using a Xiaomi Watch S1 Pro or later, pre-disable the power saving mode on the phone – it can block background data synchronization.

Just as important is the timepiece itself. For most Xiaomi models, the reset procedure is like this: go to the Settings of the watch. → System system → Resetting. This will clear all previous connections and allow you to start syncing "from scratch." 5/6 — for them, the reset is performed through multiple touch touch of the touch button (5 successively).

Installation and configuration of the official application

At the heart of Xiaomi’s ecosystem is the Mi Fitness app (formerly Zepp Life), which is where the watch is managed, downloaded from Google Play, avoiding third-party sources, which ensures that there is no malicious code and the version is up to date.

1. Launch the app and register (you can use your Xiaomi, Google or email account)
2. Select the region "Russia" - it is important for the correct operation of weather services and local notifications
3. In the main menu, tap "Add device" and select the model of your watch from the list.
4. Follow the instructions on the screen, confirming actions on both devices

Pay special attention to permission. Android 11+ The system will request separate permissions for:

• 📍 Geolocation (necessary for tracking activity)
• 📱 Notifications (to allow the clock to duplicate messages from the phone)
• 📁 Storage (for backup of data)
• 🔍 Finding devices nearby (for a stable Bluetooth connection)

Once you've successfully connected, the app will suggest you update the firmware of the watch. Don't delay it -- the new version of the software fixes the connection errors and adds new features. 5-15 - minute depending on the model:

• 🚫 Don't leave the app.
• 📶 Connect your phone to Wi-Fi (update "weighs" 20-100 MB)
• 🔋 Make sure your watch is at least 70 times charged%

Step-by-step instructions for Bluetooth synchronization

Now, let's move directly to the connection process. Follow this instruction exactly to avoid the typical errors:

1. Activate the search mode on the watch. To do this: On Mi Band: swipe up the screen and select "Connect" On Xiaomi Watch: go to Settings → Bluetooth and turn on visibility

Settings → Connected devices → Bluetooth settings

Mi Band X

Amazfit XXX

Select the device from the list and confirm pairing on both gadgets

Enter the confirmation code if required (usually 0000 or 1234)

The watch is displayed in the list of connected Bluetooth devices|

In the application Mi Fitness appeared tab with the clock data|

The clock displays the charge level of the phone|

The synchronization test notification arrives-->

If the clock is not there, try the following:

1. Reboot both devices
2. Remove the watch from the list of known Bluetooth devices on your phone
3. Turn on/off the flight mode on your phone for 30 seconds
4. Check if the connection is blocked by third-party software (antiviruses, optimizers)

💡

For Xiaomi Watch models S1 Pro with Android 12+ critically disable Automatic Sound Switching in Bluetooth settings. It may conflict with the clock connection.

If none of these solutions worked, do a full reset and re-sync.

1. In the Mi Fitness app, remove the device
2. On the clock, reset to factory settings
3. Reinstall the Mi Fitness app
4. Repeat the connection procedure from the start

Optimizing work and extending autonomy

Properly configured not only ensures stable operation, but also significantly increases battery life. Start by optimizing data updates:

• 🔄 Set the data synchronization interval on 30-60 minutes (in Device settings) → Synchronization)
• 📊 Turn off automatic weather synchronization (renew manually)
• 💤 Activate the "Do Not Disturb" mode during sleep
• 📵 Disable notifications from unimportant apps

For models with AMOLED-screen (Xiaomi Watch) S2, Amazfit GTR (4) additional savings are provided:

• 🌑 Use of dark dials
• ⏱️ Reduce the lighting time to 5 seconds
• 🔦 Disabling the function "Raise for activation"

You should also pay attention to background processes. In the Android settings, check:

• 🚫 Background activity restrictions for Mi Fitness
• 🔄 Autosynchronization of Xiaomi account
• 📁 Cleaning the app cache (once a month)

💡

For maximum operating time, disable the "Constant Measurement" function. SpO2" — It consumes up to 30% of additional charge per day.

Don't forget to physically care for the device.

• 🧼 Clean the sensors on the back of the watch with an alcohol napkin
• 🔋 Monitor the status of the charger contacts
• 🌡️ Avoid overheating (do not leave your watch under direct sunlight)

Additional features after synchronization

Once you've successfully connected, you can access advanced features that many users don't even know you have.

• 🎵 Manage music on your phone right from the clock (play/pause, next track)
• 📸 Take photos from your phone remotely (via the function "Remote shutter")
• 🔍 Use the clock to search for the phone (the function "Find the device")
• 💳 Configure contactless payments (for models with a NFC)

For owners of Xiaomi smartphones, exclusive features are available:

• 🔓 Unlock the phone when the clock is approaching (required) MIUI 12+)
• 📱 Quick access to the latest apps from the clock screen
• 🔋 Display the charge level of the clock in the notification panel of the phone

The Xiaomi Quick Apps feature is particularly interesting, which allows you to run mini-apps right on your watch.

• 🌤️ Detailed weather forecast for 7 days
• 🚶 Routes for running with voice accompaniment
• 🧘 Mini-games for relaxation
• 📅 Reminder calendar

To activate these functions:

1. Update the watch to the latest version
2. In the Mi Fitness app, go to Profile → Laboratory
3. Activate the "Fast Applications" option
4. Download the necessary mini-applications through the store in the application itself

Security and privacy advice

Smartwatches collect vast amounts of personal data, from location to biometrics, to protect their privacy.

• 🔒 Install. PIN-watch code (in Settings) → Security)
• 📱 Turn off location data transmission if you are not using it GPS-tracking
• 🗑️ Clean up your activity history regularly in the Mi Fitness app
• 🔄 Set up automatic deletion of data over 6 months

Pay special attention to the settings of the Xiaomi account:

• 🔐 Enable two-factor authentication
• 📧 Use a backup email to restore access
• 🚫 Turn off the phone number if you are not using it.

If you sell or transfer a watch to another person, you must:

1. Perform reset to factory settings
2. Delete your device from your Mi Fitness account
3. Untie the clock from the Xiaomi account (in Account Settings) → Devices)

💡

Health data collected over hours can be used for medical advice, and Mi Fitness’ privacy settings can disable the transfer of this data to third parties.

Remember that some of the watch’s features require access to contacts and messages.

• 📇 Limit Mi Fitness access to only the necessary contacts
• 🔍 Check regularly what permissions the app uses.
• 📲 Use a separate Google account to sync your hours

⚠️ Note: When using contactless payment functions, never store PIN-Bank card codes in notes or messages on your phone, and attackers can access this information through synchronized notifications.

FAQ: Frequent questions about synchronizing Xiaomi watches