Resetting headphones Xiaomi True Wireless: the full guide

Xiaomi True Wireless (TWS) wireless headphones have become an integral part of everyday life due to their convenience, compactness and high sound quality. However, even the most reliable technology sometimes fails: the headphones stop connecting to the phone, one of them does not work, the sound is interrupted or there are problems with the microphone. 90% of these cases help reset to factory settings – a procedure that returns the device to its original state, removing all saved settings and pairs of connections.

In this article, you will find detailed instructions for different Xiaomi models, from the popular Redmi AirDots to the premium FlipBuds Pro. We will discuss when to reset, how to perform it correctly without the risk of damaging the device, and what to do if the headphones do not respond to standard commands. You will also learn about hidden diagnostic features that the manufacturer does not advertise, but can save headphones from going to the service center.

When you need to reset the settings of TWS-earphones Xiaomi

Resetting is not a universal solution to all problems, but it is effective in most typical situations. Here are the key signs that your Xiaomi needs a “hard reset”:

• 🔌 Headphones do not connect to a phone or laptop, although previously worked stably.
• 🎧 One of the headphones (left or right) does not make a sound or connects separately.
• 🔊 The sound is interrupted, there are interference or delays (lag) when listening to music.
• 📱 In the list of Bluetooth devices, headphones are displayed, but not connected.
• 🔄 After updating the firmware, glitches appeared (for example, the headphones turn off themselves).
• 🔋 Fast battery discharge, although previously held the charge longer.

If you're facing one of these problems, resetting is the first step to solving it, but there are exceptions, such as if the headphones are physically damaged (wet, body crashes), reset won't help - you'll need repairs, and it's useless to reset if the problem lies in the source of the sound itself (for example, in a smartphone or PC).

⚠️ Warning: Reset removes all saved pairs of connections. After the procedure, Xiaomi headphones will have to be reconnected to all devices (phone, tablet, laptop).

Preparation for resetting: what to do in advance

Before you start resetting, follow a few simple steps to avoid additional problems:

1. Check the charge of the headphones and the case. Make sure that the charge level of both headphones and the charger case is at least 30%. If the charge is critically low, connect the case to the charger for 10-15 minutes.
2. Turn off the headphones from all devices. Go to the Bluetooth settings on your phone/laptop and remove Xiaomi from the list of associated devices, which will prevent conflicts when you reconnect.
3. Check your physical condition. Make sure the headphones are free of moisture, dust or mechanical damage. Contacts in the case should be clean (wipe them with a dry cotton swab if necessary).

If you use headphones with the Mi Home or Xiaomi Wear app, close it before resetting.In some cases, the background work of these apps can interfere with the procedure.

Headphone charge >30%|Remove headphones from Bluetooth devices|Close the Mi applications Home/Xiaomi Wear|Clear the contacts in the case-->

Reset settings on different models Xiaomi TWS

The reset procedure may vary slightly depending on the model, and below are the instructions for Xiaomi’s most popular lineups.

Redmi AirDots (all generations), Mi True Wireless Earphones

These are the most common models, and the reset on them is performed in the same way:

1. Place both headphones in the charging case and close the lid.
2. Wait 5-10 seconds, then open the lid.
3. Press and hold the touchpad on both headphones simultaneously for 15-20 seconds.
4. The indicators on the headphones will start flashing red and white – this is a signal of a successful reset.

After that, the headphones will automatically restart and be ready for a new connection.

Xiaomi FlipBuds Pro, FlipBuds Lite, Buds 3/4

In these models, the reset is performed through a button on the case:

1. Put the headphones in the case and close it.
2. Press and hold the button on the back of the case (near the indicator) for 10-12 seconds.
3. The indicator on the case will start flashing red, and then go out - this means that the reset is completed.

If the button does not respond, try to connect the case to the charging and repeat the procedure.

Xiaomi Air 2, Air 2 Pro, Air 2 SE

These models support reset through multiple pressing:

1. Get the headphones out of the case.
2. Press 5 times in a row on the right earphone touch panel.
3. Wait until the indicator starts flashing purple (reset signal).

If the headphones don’t connect after reset, try updating the firmware through the Xiaomi Wear app.

What to do if the reset does not work

Sometimes the headphones don't respond to the standard reset procedure, and here's what you can do in these cases:

• 🔋 Complete discharge. + Discharge the headphones before you turn off, then charge the case to 100% and reset again.
• 📱 Use another device. Try connecting your headphones to another phone or PC, and sometimes the problem is the source.
• 🔄 Update your firmware. Outdated software can block reset. Update your headphones with Xiaomi Wear or Mi Home.
• 🛠️ Some models (like the FlipBuds Pro) require the case to be reset. To do this, hold the button on the case 20.+ seconds until the indicator goes out.

If none of the methods worked, there may be a hardware problem (e.g., a faulty Bluetooth module).

⚠️ Warning: Don't try to disassemble the headphones yourself - this voids the warranty. Inside, glue joints are used, and unprofessional repairs can completely disable the device.

Hidden diagnostic features (for experienced users)

Xiaomi hides a few useful features that help diagnose headphone problems, which are undocumented but work on most models:

These commands don't work on all models, but they're worth a try if a standard reset hasn't worked. For example, a microphone test often detects noise-cancellation problems in FlipBuds Pro.

Frequent Resetting Mistakes and How to Avoid Them

Many users make the same mistakes that make the reset fail or make the problem worse.

• ❌ Incomplete charging. If the headphones are under 20 percent, they may not respond to the reset command. Always check the battery level.
• ❌ Press only one earpiece. To reset, you need to hold the touch panels of both earphones simultaneously (except for models with a button on the case).
• ❌ If you release the buttons too soon, the reset will not end.
• ❌ Use a non-original case, cheap analogues may not pass the reset command. Use only the original charge case.

Another common mistake is trying to reset your headphones when they're connected to your device, always disconnect them from Bluetooth before the procedure, or the system may block the command.

💡

If the headphones don't connect after reset, try forgetting the device not only on your phone, but on all previously conjugated gadgets (tablet, laptop, smart-TV), sometimes a conflict arises because of stored data on another device.

FAQ: Answers to Frequent Questions

💡

If the reset didn't help, check the headphones' compatibility with your device.Some Xiaomi TWS models don't work well with legacy Bluetooth versions (below 5.0).