Reset settings on Xiaomi True Wireless Earbuds Basic 2: Full Guide

Xiaomi True Wireless Earbuds Basic 2 is a popular model among users who appreciate the sound quality and convenience of wireless connectivity. However, even the most reliable gadgets sometimes require a reboot or a complete factory reset, which may be necessary if the device stopped connecting to the phone, malfunctioning, or you want to transfer the headphones to a new owner.

In this article, we will discuss how to properly reset settings on Xiaomi True Wireless Earbuds Basic 2 to return them to their original state, learn about all the nuances of the procedure, possible errors and how to fix them, and what to do if a standard reset did not help.

When do I need to reset settings on Xiaomi headphones?

Resetting to factory settings is a last resort, but sometimes it is necessary. Here are the main situations in which you should use this feature:

• 🔌 Headphones don’t connect to a smartphone or other device despite repeated attempts.
• 🔊 The sound is interrupted, interference occurs or one of the headphones does not play audio.
• 🔄 After updating the firmware, the device began to work unstable.
• 📱 You transfer the headphones to another person and want to remove all the associated devices.
• 🔋 Battery discharges quickly, although it used to hold the charge longer.

If the problem is temporary (for example, the headphones did not connect the first time), try to reboot them first. You just put both earphones in the case, close the lid and wait 10-15 seconds. If this does not help, start a full reset.

⚠️ Warning: Resetting will remove all the conjugated devices from the headphone memory, and after the procedure, they will have to be reconnected as a new gadget.

Preparation for resetting: what to do in advance

Before you reset your settings, follow a few simple steps to avoid additional problems:

1. Make sure the headphones are at least 30-40% charged, and low charge can interrupt the reset process.
2. Check that both earphones are in the case and the cover is closed, which is important for the reset function to work properly.
3. Disconnect the headphones from all devices in Bluetooth settings (on a smartphone, laptop, etc.).
4. If you are using the branded Mi Earphones app, close it before resetting.

It’s also worth considering that after resetting, Xiaomi True Wireless Earbuds Basic 2 headphones can automatically update the firmware when you first connect to the Internet. If you want to avoid this, turn off mobile data or Wi-Fi on your smartphone while pairing.

How to Reset Xiaomi True Wireless Earbuds Basic 2

The reset procedure for this model is simple, but requires precise steps to be followed.

1. Place both earbuds in the case and close the lid. Make sure the indicator on the case flashes - this means that the devices are charging.
2. Open the case cover and leave it open. The headphones should stay inside.
3. Find the reset button on the back of the case (usually located next to the USB-C connector) This is a small indentation that can be pressed with a paper clip or toothpick.
4. Press the reset button for 10-15 seconds. The indicator on the case will flash red and white, which is a signal to start resetting.
5. Release the button when the indicator stops flashing and turns on a straight white light, which means that the reset is complete.
6. Close the case cover for 5-10 seconds, then open it again. Now the headphones are ready for a new pairing.

If the indicator doesn't flash red and white, try repeating the procedure by holding the button longer (up to 20 seconds).

⚠️ Warning: Do not use metal objects (needles, pins) to press the reset button - this can damage the contacts.

What to do if the reset does not work?

In rare cases, the standard reset procedure may not work. Here's what you can do if the Xiaomi True Wireless Earbuds Basic 2 headphones don't reset:

• 🔋 Check the case charge. If the indicator doesn't burn at all, it's possible that the battery is completely discharged. Connect the case to charge for 10-15 minutes and try again.
• 🔄 Try resetting the headphones separately. Take them out of the case, press the touchpads on both earphones for 10 seconds, then return to the case and repeat the standard reset.
• 📱 Update your firmware through the app. Sometimes it's due to outdated software. Install the Mi Earphones app and check for updates.
• 🔧 Contact Xiaomi support. If none of these things worked, there may be a hardware problem.

If one of the headphones stopped working after reset, try clearing the contacts in the case and on the headphones themselves with a cotton swab dipped in alcohol. Sometimes oxidation of the contacts leads to loss of communication between the devices.

How to connect headphones after resetting?

After a successful reset, Xiaomi True Wireless Earbuds Basic 2 will be ready for a new pairing.

1. Open the case cover. The headphones will automatically go into pairing mode if they haven't been connected before. The indicator on the case should flash white.
2. On your smartphone, turn on Bluetooth and find Mi True Wireless Earbuds Basic 2 in the list of available devices.
3. Click on the name of the headphones to connect. Confirm the pairing if you need to.
4. After successful connection, the indicator on the case will stop flashing and light up with an even light.

If the headphones don’t appear in the list of devices, try:

• 🔄 Reboot Bluetooth on your smartphone (disable and turn on again).
• 📱 Remove headphones from the list of associated devices (if they remain there) and repeat the search.
• 🔋 Charge headphones up to 50% – sometimes low charge interferes with the correct connection.

💡

If the headphones are connected but only sound is in one, check the audio balance in your smartphone settings. On Android, you can do this in Settings → Special Features → Monoaudio.

Frequent Resetting Mistakes and How to Avoid Them

Many users make the same mistakes that make the resetting process incorrectly, and here are the most common:

• ❌ Pressing the reset button is too short, minimum retention time is 10 seconds, and if released early, the reset will not start.
• ❌ Trying to reset the headphones separately, both devices must be in the case, otherwise the procedure will not work.
• ❌ Using inappropriate objects to press a button. Metallic objects can damage contacts.
• ❌ Ignoring the indicator. If the indicator does not flash red and white, the reset did not occur.

Another common mistake is trying to reset your headphones through the Mi Earphones app, which doesn't have a software reset, just a hardware reset, through a button on the case, and if you see the Reset option in the app, it only refers to the audio settings, not the full factory reset.

Alternative ways to solve problems

If the reset didn’t help or you don’t want to do it, try other troubleshooting methods:

If the problem is with firmware, try updating it manually:

1. Install the Mi Earphones app from the official store.
2. Connect the headphones to your smartphone.
3. Open the application and go to the Firmware Update section.
4. If a new version is available, follow the instructions on the screen.

💡

Resetting is a last resort, and most of the time, the problem is solved by rebooting the headphones or updating the firmware.

FAQ: Answers to Frequent Questions