Resetting Xiaomi Bluetooth headphones: a complete guide for all models

Xiaomi wireless headphones are some of the most popular gadgets on the market due to their combination of price, quality and functionality. However, even the most reliable technology sometimes fails: the headphones stop connecting to the phone, one of them does not work, the sound is interrupted or there is interference. 90% of these problems solve the reset to factory settings - a procedure that returns the device to its original state, removing all stored connections and temporary data.

In this article, you will find step-by-step instructions for all models, from the budget Redmi AirDots to the flagship Xiaomi Buds 4 Pro. We will discuss when to reset, how to do it without the risk of damaging the device, and what to do if the headphones do not respond to standard commands, and you will learn about hidden button combinations for models with touch control, which are not described in the official documentation.

When you need to reset settings on Xiaomi headphones

Factory reset is not a universal solution, but it is effective in most typical situations. Here are the key signs that your headphones need a “reboot”:

• 🔌 Connection issues: Headphones are not on the list of available Bluetooth devices, are permanently disabled or connected to only one device.
• 🔊 Incorrect sound performance: distortions, interruptions, different volume in the left and right earphone.
• 🔋 Sensor malfunctions: headphones do not respond to touch, spontaneously turn on / off music.
• 📱 Conflicts with the firmware of the smartphone: after the update Android/iOS The headphones stopped working properly.
• 🔄 Synchronization errors: one earphone connects and the second does not (typical for models with master-sleave architecture).

It is important to understand that resetting will not help if the problem is related to physical damage (for example, moisture, falling) or a discharged battery.

⚠️ Attention: If Xiaomi headphones stopped turning on after a fall in the water or a heavy impact, resetting the settings can aggravate the problem.First check the integrity of the case and contacts of the charging case.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few simple steps to avoid additional problems:

1. Check charge: Make sure both headphones and charge case are at least 30% charged.Discharged devices may not respond to reset commands.
2. Disconnect from all devices: Remove the headphones from the list of associated devices on your smartphone, tablet and computer, which will prevent automatic connection during the procedure.
3. Use the original case: Some models (such as the Xiaomi Buds 3 Pro) require a branded charging case for a successful reset.
4. Prepare an alternative device: If the reset does not help, you may need to flash through your PC – download the official software from the Xiaomi website in advance.

If you use headphones with Mi Home or Xiaomi Earbuds, upgrade to the latest version. Newer versions often add software reset support, making it easier to do.

💡

Once reset, Xiaomi headphones may temporarily lose the quick connection feature (for example, opening a case will not automatically initiate pairing).This is normal - just plug them manually through Bluetooth settings.

Reset settings on Xiaomi headphones: universal instruction

Most Xiaomi models support the standard reset procedure through a button combination. Here is the basic algorithm that works for 80% of devices:

1. Place both headphones in the charging case and close the lid.
2. Connect the case to the power source (laptop or charger).
3. Open the case cover and hold the reset button (usually located on the back of the case) for 10-15 seconds.
4. The indicator on the case will flash red and white – this is a signal of a successful reset.
5. Close the lid, wait for the headphones to automatically turn off, then remove them and try to connect again.

If there is no reset button on the case (like Redmi AirDots 2), use an alternative method:

1. Get the headphones out of the case.


2. Press the touch panels on both headphones for 10 seconds.




3. Wait for the double beep and the flashing of indicators.

Make sure the headphones are charged | Disconnect from all Bluetooth devices |Use the original charging case |Use the firmware in advance (if necessary) |Check the reset button on the case-->

Reset for specific models: features and nuances

Despite the general similarity, different Xiaomi headphone models have unique ways to reset, and the table below collects current data for popular devices:

For models with active noise cancellation (ANC) After reset, you may need to reset the sound profile in the application. For example, in Xiaomi Buds 3 Pro, the reset zeroes the user’s audio profile. EQ-presto.

⚠️ Note: Xiaomi Mi True Wireless Earbuds Basic 2 headphones do not support button reset software. They require special software from the manufacturer, which can be downloaded here.

Frequent Resetting Mistakes and How to Avoid Them

Many users are not experiencing problems with their headphones, but with the wrong actions during resets.

• ⏱️ Insufficient button holding time: Most models require holding the button for 10-15 seconds, but users often release it earlier when they see the first flash.
• 🔌 Using an unoriginal case: cheap analogues may not transfer the reset command to headphones.
• 📵 Reset attempt with Bluetooth connected: headphones must be disconnected from all devices before the procedure.
• 🔋 Reset on discharged headphones: if the charge is below 10%, the device may not react.
• 🔄 Ignoring audio signals: Some models (like Buds 4 Pro) give voice prompts – you have to wait for them.

Another common problem is resetting just one headphone, and in master-sleave models like Redmi AirDots 3, you have to reset both devices at the same time, otherwise they will lose sync.

💡

If the headphones are still not working after reset, check them on another device (for example, on a PC or tablet) to help determine if the problem is in the headphones or in the smartphone.

What to do if the reset did not help: alternative solutions

If a standard reset has not restored the performance of the headphones, try the following methods:

1. Firmware Update: Outdated software can cause conflicts with new versions of Android/iOS. Update your firmware through the official Xiaomi Earbuds or Mi Home app.
2. Manual pairing: Remove the headphones from the Bluetooth list of devices, then manually initiate a search for new devices. To do this, hold the touchpad on the headphones until you appear on the list.
3. PC Reset: Some models (e.g. Xiaomi Buds 3T Pro) support reset via computer using the Mi Flash Tool utility.
4. Check on another device: Connect your headphones to another smartphone or tablet, and if they work, the problem is with your main device settings.

If none of the methods worked, contact Xiaomi Service Center.In some cases, the malfunction may be due to a hardware failure (such as a Bluetooth module failure) that requires professional repair.

How to avoid problems in the future: prevention of failures

To minimize the risk of repeated failures, follow these guidelines:

• 🔄 Regularly update the firmware: the manufacturer releases patches that fix connection and sound errors.
• 🔋 Avoid full discharge: charge your headphones when the charge drops below 20%.Deep discharge shortens battery life.
• 📱 Use one device to connect: Frequent smartphone change can cause conflicts in headphone memory.
• 🧹 Clean contacts: dust and dirt on case contacts and headphones can disrupt charging and data transfer.
• 🌡️ Avoid extreme temperatures: Do not leave headphones in direct sunlight or in the cold.

If you use headphones with Xiaomi Earbuds, enable Auto Update in your settings, which will allow you to get critical fixes without manual control.

💡

For touch-controlled models (such as the Xiaomi Buds 4 Pro), you can turn off unnecessary gestures in the app, which will reduce the number of false positives and prolong the life of the sensors.

FAQ: Answers to Frequent Questions