Modern wearables like the Xiaomi Mi Band 5 are highly autonomous and stable, but even they can experience software failures. Periodically, users face situations when the tracker stops syncing data, freezes on the boot screen or displays notifications incorrectly, in which case the only effective solution is to force the device to reset to factory settings.
The return process may be required not only in the event of errors, but also when the device is transferred to a new owner. It is important to understand that a complete reset will delete all the accumulated data about training and activity stored in the memory of the bracelet itself.
In this guide, we will take a look at all the available methods for rebooting and resetting the Mi Band 5, from simple software solutions in the smartphone menu to hardware manipulations. Following the described algorithms will help you quickly restore the device to work without going to the service center.
Software reset via the Mi Fit app
The safest and most recommended method by the manufacturer is to use the official Mi Fit (or Zepp Life) app, which allows you to properly break the connection between the gadget and the smartphone, clearing the pairing cache. First, make sure that the bracelet is charged and is in the range of Bluetooth.
Open the app on your smartphone and go to the device profile. In the program interface, you need to find the connection control section. Pressing the appropriate button initiates the detachment process, after which the tracker will return to standby (pairing).
- 📱 Run the Mi Fit app on your Android or iOS device.
- 👤 Go to the Profile tab and select your Mi Band 5 image.
- ⚙️ Scroll down the menu to "Unbind" or "Ununbind».
- ✅ Confirm the action in the pop-up warning window.
After performing these actions, the indication on the bracelet screen should change, suggesting that the scan be scanned. QR-This means that the software reset was successful, and if the device does not respond to the application commands, a deeper intervention in the system settings may be required.
⚠️ Warning: After the application is uncoupled, all unsynced data about the latest workouts may be lost. Before reset, open the application and wait for the download of the data from the bracelet to be completed.
💡
Before unbundling the device, force the data in the application to be updated by pulling the screen down for synchronization to save activity statistics in the cloud.
Use of the reset function in the bracelet menu
The Mi Band 5 firmware includes a built-in reset feature that is available directly through the tracker's touch menu, which is useful when the smartphone is unavailable or the app is not working correctly, and navigation is done by swiping and light touching on the screen.
To activate the reset, you need to get to the settings section of the device itself. Xiaomi interface is intuitive, but requires consistent execution of actions. Find the gear icon or option "Additional" in the main menu.
Inside the settings menu, you should look for a item labeled "Reset" or "System." Selecting this option will trigger a countdown timer that gives you the time to cancel the action. If you do not interrupt the process, the device will restart and clear the user data.
| Parameter | Description of action | The result |
|---|---|---|
| The way is on the menu | Settings → System → Reset | Transition to cleaning function |
| Confirmation | Touching the tick or the "Yes" button | Starting the discharge process |
| Waiting time | 3-5 seconds | Finalization of the operation |
It is important to note that some firmware versions may not have a direct reset button in the menu and the system will only offer a reboot, in which case the software reset is only possible via a mobile application, and the reboot does not delete data, but only updates the state of the system.
☑️ Check before reset via menu
Hardware reboot when getting stuck
Situations where the Mi Band 5 touch screen stops responding to touch are rare, but require a specific approach. If software methods are not available due to the freezes of the interface, hardware reboot is used. This is not a complete factory reset, but an effective way to revive the device.
To perform a hard reboot, you need to place the tracker on the charger. A special connector with magnetic contacts signals to the power controller, which often initiates a restart of the system. Make sure the contacts are clean and tightly fit together.
⚠️ Note: Do not use damaged cables USB or charging units with unstable voltage, as current surges can damage the power controller of the bracelet.
If the charging connection didn't work, you can try the discharging method. Leave the device on until the battery is completely depleted. Once the screen goes out, put the bracelet on charge - when turned on, many systems automatically perform integrity checks and reset temporary errors.
In rare cases, repeatedly tapping the touchpad during charging can interrupt the freeze and return control. Physical impacts such as tapping are not recommended, as they can damage the fragile AMOLED screen.
What to do if the bracelet warms up when charging?
Removing the device from the Bluetooth smartphone settings
Sometimes the problem is not the tracker itself, but the wrong pairing cache of the smartphone operating system, in which case you need to reset the connection from the phone. This action often helps if the Mi Band 5 is displayed as “Connected”, but the data is not transmitted.
Go to the basic settings of your Android or iOS device and open the Bluetooth section. In the list of available devices, find the Mi Band 5 entry. Clicking on the information icon or long-term retention will allow you to see the option “Forget the device” or “Cancel pairing”.
- 🔍 Open Bluetooth settings on your smartphone.
- 📡 Find the Mi Band 5 list.
- 🗑️ Select the option “Forget this device».
- 🔄 Reboot your smartphone to clean up the Bluetooth stack.
After these steps are completed, the tracker will go into search mode, and when you try to connect it again through the application, you may need to confirm it through vibration or code on the screen, which is a standard security procedure to protect your data.
If the device is not removed from the list or the Forget button is inactive, try clearing the cache of the Bluetooth service itself in the Android application settings.This is a deeper method that requires access to system settings, but it is effective at making communication errors.
💡
Removing the smartphone from the Bluetooth settings does not erase the data inside the bracelet, but breaks the logical connection, requiring a re-pairing procedure.
Comparison of Resetting Methods and Their Impact on Data
It is important for users to distinguish between types of resets, as they have different consequences for the safety of information. Xiaomi Mi Band 5 stores data locally until the moment of synchronization, and choosing the wrong method can lead to loss of statistics.
Soft reset (reboot) affects only RAM and running processes, saving all user settings. Hard reset (via menu or app) returns the device to factory status by removing targets, alarm clocks and unsaved activity tracks. Hardware reset (discharge) is the least predictable.
The table below compares methods by exposure and risk:
| Method | Data retention | The need for re-binding | Risk of error |
|---|---|---|---|
| Reboot (Reboot) | Complete. | No. | Low. |
| The uncoupling at Mi Fit | Partial (before synchronization) | Yes. | Medium. |
| Resetting the bracelet menu | No (deletion) | Yes. | High-pitched |
It is recommended to always start with the least invasive methods. If a simple reboot does not solve the problem of freezing, then you should move to a full reset. Backup in this context means timely synchronization with the cloud.
Common Errors and How to Resolve Them
During the reset process, users may encounter various errors that prevent the operation from completing. A common problem is the inability to find the device after the reset, in which case, make sure that the bracelet is not automatically connected to the phone via Bluetooth settings, bypassing the application.
Another common mistake is to report that the device is already linked to another account.Mi Band 5 has anti-theft protection and is tied to a specific user ID. To solve it, you need to log into the previous owner's account and untie the tracker there.
- ❌ Sync error: Check the Mi Fit version and update it.
- ❌ Bracelet not visible: turn on geolocation (GPS) on a smartphone, this is the requirement of Android OS.
- ❌ Upgrade failure: Don’t interrupt the firmware process, keep your phone close.
If the device is not behaving properly after all the manipulations, the problem may be hardware in nature, in such cases, the software reset is powerless, and a diagnosis is required at the service center, and the warranty case may be relevant if the device was recently purchased.
⚠️ Note: Using modified versions of applications (Mi Fit Mod) to reset or flash the device may result in an irreversible locking (the “brick.