The process of integrating wearable electronics into the Xiaomi ecosystem often raises questions among users, especially given the variety of applications and versions of the MIUI operating system. Amazfit smartwatch, being part of the Huami ecosystem (now Zepp Health), perfectly fits with the Chinese brand’s smartphones, but requires the correct initial setup for stable operation.
The main difficulty is choosing the right software and configuring the permissions of the Android system, which on the shells of Xiaomi has an aggressive energy saving policy. It is critical to install the application that matches the model of your watch and the region of your account, since using outdated software (for example, old Mi Fit instead of Zepp Life) can block the ability to register a device. In this article, we will analyze all the nuances, from downloading software to fine-tuning notifications.
You don't have to be a technician to do this. 10-15 So we're going to look at not only the standard path, but also the specific settings. MIUI, These often block the background processes needed to synchronize health data and receive notifications.
Choosing the Right Application for Management
The first step is to install control software. Mi Fit was the de facto standard for a long time, but Huami has rebranded and split the functionality. Today, the main application is Zepp Life (formerly Mi Fit), which is the one that is needed for most Amazfit watches, including the popular Bip, Band and GTS/GTR series.
But there are new models that require the Zepp app (without the Life console) to be installed, a more modern platform with a revamped interface and enhanced analytics. To avoid confusion, look at your device model: older and time-tested gadgets are more likely to run through Zepp Life, while new products may require Zepp.
Apps should be downloaded exclusively from official sources to avoid malicious code or non-working versions. For Xiaomi users, this is Google Play Market or the built-in GetApps store (Mi Store). APK-Files from unverified sites may lead to leakage of personal data about your health and location.
- 📱 Zepp Life: Classic app for most Amazfit, Bip, Mi Band models.
- ⌚ Zepp: New application for flagship models and devices with advanced functionality.
- 🔗 Mi Fitness: Sometimes used for the latest devices released after 2022.
- ⚙️ Bluetooth: Built-in system utility that must be active before setting up.
⚠️ Note: Do not attempt to tie the watch through the standard Bluetooth menu in your phone settings. The pairing must occur strictly within the app, otherwise the watch may lock for other devices or not work properly.
Preparation of Xiaomi smartphone to pair
Before you start the process of finding a device, you need to make sure that your Xiaomi smartphone is ready to work with external gadgets.The MIUI shell or HyperOS has strict security settings that can prevent the clock from being detected. First of all, check if the Bluetooth module is enabled and if it is available for detection by other devices.
An important step is to give the application all the necessary access rights immediately after installation.The Android system on Xiaomi smartphones can restrict the background operation of applications, which will lead to a break in communication with the clock a few hours after setting up.You need to manually allow the application to access geolocation, even if you do not plan to use maps, as this is a requirement of the Bluetooth Low Energy protocol.
Also make sure your phone is on GPS. Without an active geo-location module, the app won't be able to complete the registration process for a new device.
Check the version of your smartphone’s operating system. For the stable operation of modern Amazfit watches, it is recommended to use Android version 6.0 and higher, as well as the current version of the MIUI shell. If your phone has not been updated for a long time, there may be problems with the compatibility of encryption protocols.
Step-by-step instructions for connecting
The pairing process requires sequential action. First, launch the downloaded app and log in to your account (you can use Google, Apple ID or phone number). After authorization, go to the Profile or Mine tab, where the add button is located.
Click Add Device and select from the Amazfit manufacturer list. The app will start scanning the space. At that point, make sure the watch is in pairing mode. It usually switches automatically when it first turns on, displaying the display. QR-code.
☑️ Checklist before pairing
When the name of your watch appears on the list, click on it. A confirmation code may appear on your smartphone screen and on your watch screen. Verify the numbers and confirm the action on both devices. The data synchronization process will take from 30 seconds to 2 minutes.
During the initial setup, the app will suggest updating the watch firmware. It is strongly recommended to agree to the update, as new versions of firmware often contain connection errors corrections and improve the stability of the Bluetooth module.
| Phase | User action | Expected output |
|---|---|---|
| 1. Installation | Download Zepp Life / Zepp | Application icon on the desktop |
| Authorization | Entry through account | Main screen of the application is open |
| 3. Search. | Click "Add device" | List of gadgets found |
| 4.Pairing | Code confirmation | Successful synchronization of time and data |
Configure notifications and permissions in MIUI
The most common problem for Xiaomi + Amazfit owners is the lack of notifications on the watch, which is because the system kills the application’s background process to save energy.
Go to Settings → Apps → All apps. Go to Zepp Life (or Zepp.) and select Battery and no restrictions. This will prevent the system from disabling the application. Next, in Permissions, make sure that the options are “Autostart”, “Mail on top of other apps” and access to “Contacts” and “SMS”.
It's also important to fix the app in memory. Open the list of running apps (bottom-up swipe and hold or menu button), find the app window for the watch, and press the lock, which will prevent it from closing when the memory is cleared.
What if notifications are delayed?
To configure the specific applications you want to see notifications from (e.g. WhatsApp, Telegram, Viber), go to the profile settings inside the Zepp Life app. Find the "Application Notifications" section and activate the desired switches. The list of applications can only be updated after you receive at least one message from the relevant service.
Addressing common problems
Sometimes it doesn't go smoothly. If the app can't see the watch, even though it's on and nearby, try forgetting the device in your phone's Bluetooth settings and rebooting the phone. Often the problem lies in the cache of the Android Bluetooth stack.
If the clock says "Conjugated" but the data is not synchronized, check the date and time on the phone. The time difference can cause a security protocol error. Also make sure the clock does not activate "On the plane" or "Do not disturb" mode, which can hide the device from search.
- ❌ Connection Error: Turn off and turn on Bluetooth, reboot your phone.
- ❌ Password reset: If you forget your account, use the recovery function via email.
- ❌ Unstable communication: Check if the case on the phone interferes with the Bluetooth antenna.
In rare cases, you need to reset the clock completely to factory settings, and you can do this through the menu of the watch itself (Settings → Reset) or through the application if it is still partially working, and after reset, you will need to do the pairing procedure again, as with a new device.
⚠️ Warning: When you reset your hours, all accumulated training and health data that didn't sync with the cloud will be permanently deleted. Before reset, try to open the app and wait for full sync.
FAQ: Frequently Asked Questions
Can I connect an Amazfit watch to two phones at the same time?
Why does the Amazfit watch not show notifications from WhatsApp?
Do you need the internet to work with a Xiaomi phone?
What if the app says “Device is busy”?
💡
The main secret of stable operation is the correct setting of energy saving in MIUI. Without the permission of "Autostart" and removing the battery restrictions, the watch will constantly lose communication.
The correct setting of the Amazfit watch on Xiaomi smartphone gives you access to the full functionality of the wearable gadget. Following these instructions, you will ensure stable operation of the activity tracker and timely receipt of important messages. Remember that the software is constantly updated, so the interface may be slightly different, but the logic of actions remains the same.