How to reset Xiaomi Mi Band to factory settings: all ways for models 1S–8

The Xiaomi Mi Band fitness bracelets have become an integral part of the daily lives of millions of users due to their functionality, compactness and affordable price. However, even the most reliable device can fail, from accidental interface glitches to complete failure after a failed upgrade.

In this article, we will discuss in detail all possible reset methods for Mi Band models. 1S–8, including software and hardware methods, you will learn how to correctly perform hard reset through a physical button, make soft reset through the Mi Fitness app (formerly Mi Fit), and what to do if the bracelet does not respond to commands. We will pay special attention to the nuances for new firmware versions and common errors that may occur in the process.

Important: the reset procedure removes all user data from the wristband — steps, sleep history, alarm settings and notifications. If the device is synced with a Xiaomi account, some of the information can be recovered after re-association, but the unsynchronized data will be lost irretrievably.

1.When do you need a Xiaomi Mi Band reset?

Resetting is a last resort when standard problem-solving techniques don't work, and here are the typical situations that require a complete reboot of the device:

• 🔄 The bracelet hung on the logo after updating the firmware or does not turn on.
• 📱 The device does not sync with the Mi Fitness application despite repeated attempts.
• ⚡ The battery is discharged too quickly (for example, in 1-2 hours), although it used to hold the charge for days.
• 🛠️ Artifacts, flickering or incorrect symbols appear on the screen.
• 🔒 Bracelet blocked after failed change attempt PIN-code.
• 📲 Notifications do not arrive or duplicate despite the correct settings in the app.

Before you start resetting, try more gentle methods:

1. Reset the bracelet (for models with a button, hold it for 10-15 seconds).
2. Reinstall the Mi Fitness app on your smartphone.
3. Update the bracelet firmware to the latest version through official software.
4. Check your smartphone’s compatibility with the bracelet (e.g., Mi Band 8 requires Android 6.0)+ or iOS 12+).

⚠️ Note: If the bracelet is in water (even if the model has 5 protection) ATM), The reset may not help - it requires drying or repair. Moisture often causes corrosion of the contacts, which leads to hardware malfunctions.

2. Resetting methods: which one to choose?

There are three main Xiaomi Mi Band reset methods, each suitable for different scenarios.The choice depends on the bracelet model, its current condition and the tools available.

* The Mi Band 8 is different in terms of hard reset, requiring you to hold the button for longer (up to 20 seconds) due to the changed control logic.

If you're not sure which method to choose, start with soft reset, which is the safest and doesn't require physical intervention. If the bracelet doesn't respond to commands from the app, go to hard reset. ADB It is recommended only for experienced users, as incorrect commands can permanently disable the device.

3. Soft reset: reset via Mi Fitness app

This is the easiest and most recommended way to do this if the bracelet is switched on and synced to your smartphone, and it takes no more than 2-3 minutes and requires no additional skills.

Step-by-step:

1. Open the Mi Fitness app on your smartphone and wait for the bracelet to connect.
2. Go to the Profile section → Mi Smart Band [Your Model].
3. Scroll down and select Unplug device (or Remove device in older versions of the app).
4. Confirm the action - the bracelet will be disconnected from the account, and all settings will reset.
5. Reset the bracelet (hold the button for 5-10 seconds if you have one).
6. Start the application again and go through the initial setup procedure, as after purchase.

If the item Untie the device is missing, try an alternative path:

1. In the main menu of the application, tap on the icon of the bracelet.
2. Select Settings → Resetting settings.
3. Confirm the reset and wait for the process to be completed (the bracelet will reset automatically).

⚠️ Note: On Mi Band 7 and 8 models, reset via the app may require re-activation NFC (If the function is supported. Go to Settings for this. → NFC And follow the instructions on the screen.

💡

If after resetting the bracelet does not connect to the application, try clearing the Mi Fitness cache in the smartphone settings (Settings) → Annexes → Mi Fitness → Memory. → Clear the cache).

4. Hard reset: reset via physical button

This method is useful if the bracelet does not respond to touch, hovers on the logo or does not turn on. The procedure is different for different models, but the general principle is the same: prolonged holding of the reset button.

Instructions for Mi Band 1S–6:

1. Remove the bracelet from your hand and place it on a flat surface.
2. Find a physical button (usually located below the case, next to the charging connector).
3. Connect the bracelet to the charger (this is mandatory for the Mi Band 5-6).
4. Hold the button for 15-20 seconds until the Mi logo or vibration appears on the screen.
5. Release the button – the bracelet will start the reset process (the screen may flash or the indicator may burn).
6. After restarting (usually takes 1-2 minutes), connect the bracelet to the application again.

Instructions for Mi Band 7-8:

• 🔋 Connect the bracelet to the charger (required!).
• 🖱️ Hold the button for 20 to 25 seconds until you feel a triple vibration.
• 📱 Release the button and the screen will show the words Reset or Erasing.
• ⏳ Wait until it is finished (the bracelet will reboot automatically).

If the bracelet does not respond to the button holding:

• Check that it is at least 10% charged (plug it into charging for 10-15 minutes).

5. Advanced discharge through ADB (power-user)

This method requires command line skills and is only suitable for Mi Band 4-8 models, as older versions do not support debugging. ADB. It's used if:

• 🔐 Bracelet locked. PIN-code, and you forgot it.
• 📦 You need to install custom firmware (for example, Amazfit).
• 🐞 The firmware is damaged and standard reset methods are not working.

Tools required:

• 💻 Computer with Windows or Linux.
• 🔌 Firmware cable (e.g. Mi Band) 4/5/6/7/8 USB Cable).
• 📦 Utilities: ADB, Fastboot, bracelet drivers.
• 📄 Firmware for your model (download from the official Xiaomi website or trusted forums).

Step-by-step:

1. Connect the bracelet to the PC via a special cable (not the usual one) USB!).
2. Open the command line (CMD or Terminal) and check the connection: adb devices If the bracelet is determined, you will see its serial number.
3. Reset command: Adb shell am start -a android.intent.action.MASTER_CLEAR
4. Wait for the process to be completed (the bracelet will reboot).
5. If you need firmware, use the fastboot flash system. system.img (substitute system.img in the name of your firmware file).

⚠️ Attention: Wrong commands ADB/Fastboot If you are not sure of your actions, consult a specialist or use standard reset methods.

💡

Dumping through ADB — Soft or hard reset solves 90 percent of the problems, and only use it if other methods don't work, and you understand the risks.

6. Frequent errors and their solutions

Even when following instructions, users often face difficulties, and let's look at the most common problems and how to fix them.

If the bracelet is not turned on or charged after reset, check:

• 🔌 Cable and power supply - try charging from another source.
• 🔋 State of contacts - clean them with alcohol from oxidation.
• 📱 Smartphone compatibility – some Huawei or Samsung models may block Mi Band connection due to energy-saving settings.

If nothing helps, there may be a hardware problem (e.g., damaged battery or motherboard), in which case we recommend contacting the Xiaomi service center.

7.How to avoid problems after resetting?

To keep the bracelet running consistently after the reboot, follow these tips:

• 📲 Update your firmware to the latest version via Mi Fitness (Device Profile) → Update of the PO).
• 🔄 Keep your data synced regularly (at least once every 2-3 days) to avoid losing your activity history.
• 🔋 Avoid full discharge – charge the bracelet at 20-30 charge level%.
• 🚫 Do not install custom firmware unless you are sure of their compatibility.
• 🛡️ Set up a backup in Mi Fitness (Settings) → Account. → Backup).

For models with NFC (Mi Band 7/8):

• After reset, reactivate NFC bracelet settings.
• If you use the bracelet for payment, link the card again through the bank application.

💡

If the bracelet started to glittle after updating the firmware, try to roll back to the previous version. XDA Developers and go through ADB.

FAQ: Frequent questions about resetting Xiaomi Mi Band