How to tie Xiaomi headphones to a smartphone: instructions for all models (2026)

Xiaomi wireless headphones are among the most popular accessories due to the combination of price, sound quality and functionality. However, even with such devices, users sometimes have difficulties when first connecting or re-pairing. This article will help you understand how to properly tie Xiaomi headphones (including the Mi True Wireless Earbuds series, Redmi Buds, Xiaomi Buds and others) to a smartphone on Android or iOS, as well as solve typical connection problems.

We’ll look at not only the standard Bluetooth pairing procedure, but also alternative methods, such as the Mi Fit or Xiaomi Wear app, which focuses on resetting headphone settings if they are not determined by the device, as well as the nuances of working with different versions of the firmware. At the end of the article, you will find answers to frequent questions and tips on optimizing the connection for minimal audio delays.

If you are faced with the fact that Xiaomi headphones are not connected, constantly disconnected or are working with interference, here you will find proven solutions. instructions are relevant for models 2020-2026 and are compatible with most smartphones (not only the Xiaomi brand).

1. Preparation of Xiaomi headphones for pairing

Before you tie your headphones, make sure they're ready to plug in. Most of the problems are caused by a dead battery or a malfunctioning mode.

To start, charge the case (and the headphones themselves) to at least 30%. The charge indicator on the case should burn white or green (depending on the model). If the indicator is red or flashing, connect the case to charge for 10-15 minutes.

• 🔋 Check the charge of the case: bring the headphones to the ear - with a low charge, a voice warning will sound (on models with support).
• 📱 Disable other Bluetooth devices: They can interfere with pairing.
• 🔄 Update the firmware of the headphones: if they were previously connected, but now do not work, you may need an update (more about this below).

If Xiaomi headphones have already been paired with another device, they need to be reset to the factory settings.

1. Place both headphones in the case and close the lid.
2. Press and hold the button on the case (usually located behind or below) for 10-15 seconds until the indicator flashes red and white.
3. Open the case cover - the headphones will go into pairing mode (the indicator will flash white).

💡

On models Xiaomi Buds 4 Pro and newer reset is performed through triple pressing on the touch panel of the headphone (when in the case).

2. Standard Bluetooth connection (Android/iOS)

The most versatile way to tie Xiaomi headphones is to use the smartphone's built-in Bluetooth module.The procedure is almost identical to Android and iOS, but there are nuances.

On Android (including Xiaomi, Redmi, POCO smartphones):

1. Open Settings → Bluetooth and turn on the module.
2. Remove the headphones from the case – they will automatically go into pairing mode (the indicator flashes white).
3. In the list of available devices, find the name of your model (for example, Mi True Wireless Earbuds Basic 2) and tap it.
4. Confirm the pairing if a request appears.

On the iPhone or iPad:

1. Go to Settings → Bluetooth.
2. Make sure the headphones are in search mode (blinking white indicator).
3. Select a device from the list. iOS may have an iCloud connection notification, which is normal for Swift Pair-enabled models (e.g. Xiaomi Buds 3T Pro).

If the headphones don’t appear in the list, try:

• 🔄 Reboot Bluetooth on your smartphone (disable/enable).
• 📱 Remove old paired devices from headphone memory (via reset, as described above).
• 🔋 Check the case charge - at a level below 10%, the pairing mode may not be activated.

3. Connection via a proprietary application (Mi Fit/Xiaomi Wear)

For some models (for example, Xiaomi Buds 3 Pro or Redmi Buds 4 Active) it is recommended to use official applications - Mi Fit or Xiaomi Wear. They allow you not only to tie headphones, but also:

• 🎧 Set up the equalizer and noise reduction modes.
• 🔄 Update the firmware of headphones.
• 📊 View usage statistics (work time, charge).

Instructions for connecting through Xiaomi Wear:

1. Download the app from Google Play or the App Store.
2. Sign up or sign in to your Xiaomi account (required to synchronize settings).
3. Click Add Add the device → Headphones.
4. Select a model from the list and follow the hints on the screen.

If the app does not find headphones:

• 📱 Make sure your smartphone is enabled with Bluetooth and Geodata (required for some features).
• 🔄 Restart the application and repeat the search.
• 📋 Check the compatibility of the headphone model with the application version (relevant data in the table below).

4. Solving Connection Problems

Even after successful pairing, Xiaomi headphones can work unstable. Let's look at the typical problems and ways to fix them.

4.1 Headphones are connected, but the sound is interrupted

If the sound stutters or disappears, the cause is usually:

• 📶 Interference from other devices: turn off nearby Wi-Fi routers at 2.4 GHz or microwave ovens.
• 📱 Outdated firmware: update your headphones through Xiaomi Wear.
• 🎵 Bluetooth Codec: Select Android Developer Settings SBC or AAC AptX (if supported).

4.2 One earphone is not working

If the left or right earphone is not connected:

1. Place both headphones in the case and close the lid for 10 seconds.
2. Take them out and wait for the synchronization (the indicators should flash synchronously).
3. If it doesn’t help, reset the settings (section 1) and repeat the pairing.

4.3 Headphones are not defined by a smartphone

On Xiaomi Buds 3 Pro and later, you may need to turn on the “Fast Pair” mode manually: press the touch panel on both headphones for 5 seconds until you hear the beep.

Other reasons:

• 🔋 Case discharged (charge to) >20%).
• 📱 The headphones are already paired with another device (reset them).
• 🛠️ Bluetooth headphone module damaged (requires repair).

Case charge tested (>20%)

Headphone reset performed

Updated firmware headphones and smartphone software

Connection to another device has been tried

-->

5. Optimizing Connection for Games and Videos

For minimal audio delay (important for gaming or watching videos), set up Xiaomi headphones as follows:

On Android:

1. Activate Game Mode in the Xiaomi Wear app (available for Buds 3 Pro, Buds 4 Pro, etc.).
2. Enable Low Latency in Bluetooth settings (path: Settings → Connected Devices → Headphones → Sound settings).
3. Select the aptX Low Latency or AAC codec (if supported).

On iOS:

• 🎮 Use the codec. AAC (set up automatically).
• 📱 Turn off background apps that use Bluetooth (such as fitness trackers).

To check for delay:

• 🎵 Play the video on YouTube and sync the sound with your lip movements.
• 🎮 In games, use test modes (for example, in the game). PUBG Mobile or Call of Duty: Mobile).

💡

For models Xiaomi Buds 4 Pro delay in Game Mode is only 55 ms (vs 100-150 ms in standard mode).

6.How to tie Xiaomi headphones to multiple devices

Xiaomi headphones support multi-point connectivity (to two devices at the same time), but only on some models (for example, Buds 4 Pro, Buds 3T Pro).

1. Connect the headphones to the first device (such as a smartphone).
2. Open the case cover and press the pairing button (usually 1 time) until the indicator starts flashing white.
3. On a second device (like a laptop), find the headphones in the list of Bluetooth devices and connect.

Limitations:

• 📱 Music will only be played on one device (priority).
• 🎧 To switch between devices, you may need to manually turn off/connect headphones.
• 🔋 Multipoint mode increases battery consumption by 10-15%.

If your model does not support multi-dot, you will have to manually reconnect the headphones through a Bluetooth menu or reset.

💡

On Windows 10/11 for stable connection of headphones Xiaomi disable in the Device Manager option Support hands-free telephony (in the properties of Bluetooth-device).

7. Resetting and flashing headphones

If Xiaomi headphones are not working properly (self-disable, do not reproduce sound, do not respond to touch), a complete reset or flashing may be required.

7.1.Right discharge

For most models:

1. Place the headphones in the case and close the lid.
2. Press and hold the button on the case for 20–30 seconds until the indicator flashes red and white.
3. Open the lid - the headphones will reset and go into pairing mode.

Update to firmware

Through the Xiaomi Wear app:

1. Connect the headphones to your smartphone.
2. Open the application and go to the Device → Firmware Update.
3. If a new version is available, click Update and wait until it is completed (don’t interrupt the process!).

⚠️ Note: If during the firmware update, the headphones become depleted or the connection is interrupted, they may stop turning on. In this case, contact the Xiaomi service center - self-repair will lead to loss of warranty.

FAQ: Frequent questions