Xiaomi Earbuds Basic 2 wireless headphones have become a popular choice thanks to a combination of affordable price, high-quality sound and compact design. However, even these seemingly simple devices have nuances of use that affect comfort, sound quality and connectivity. Many users face problems: headphones fall out while driving, poorly held in their ears or not enough bass. Most often these problems are associated with improper fitting into the ear canal.
In this article, we will discuss how to properly wear the Xiaomi Earbuds Basic 2 so that it sits tight, does not cause discomfort and demonstrates the full potential of sound. You will learn which earbuds are suitable for your ear anatomy, how to position the headphones for maximum stability and what to do if they fall out anyway.
1.Preparation for the first use: unpacking and check of completeness
Before you put on your headphones, make sure you unpack them properly and prepare them for work. In the box with Xiaomi Earbuds Basic 2 should be:
- 🎧 Two wireless headphones (right and left)
- 🔋 Charging case with charge indicator
- 🔌 Cable USB Type-C for charging
- 📜 Short instructions (may be in several languages, including Russian)
- 🔄 Set of replacement embushures (usually 3 sizes: S, M, L)
If the kit does not contain earpieces or charging cable, this is an occasion to contact the store - you may have received an incomplete set. Also check that the headphones and case are not visible damage, whether scratches, chips or deformities. Pay special attention to the contacts on the headphones and inside the case - they must be clean and not bent.
Before the first turn on, it is recommended to fully charge the headphones and case.
- Place the headphones in the case - they should "magnetize" and start charging.
- Connect the case to a power source (for example, to charge from a smartphone) using a USB Type-C cable.
- Wait until the indicator on the case stops flashing and lights up in green - this is a signal of full charging.
💡
If the indicator on the case flashes red, it means low charge level, in which case the headphones can discharge faster or turn off during use.
2. Choosing the right earpieces: how to choose the size
One of the keys to comfortable wearing Xiaomi Earbuds Basic 2 is the right fitting of the silicone tips.
- 🔊 Quality of sound insulation (the tighter the fit, the better the bass and less external noise).
- 🏃♂️ Stability of landing (incorrect size leads to headphones falling out).
- 😊 Comfort with prolonged wear (too large or small ambushes cause pressure).
There are three sizes in the kit: S (Small), M (Medium) and L (Large). To determine your size, follow a simple test:
- Take an M sized earpiece (usually it is already installed on headphones).
- Carefully insert the earpiece into the ear, scrolling it slightly for a better fit.
- If you feel pressure or discomfort, try the L size.
- If the earphone falls out easily or misses external sounds, try the S size.
Now, notice that ears can be asymmetrical, sometimes the right earpiece and the left earpiece require different sizes of earpieces, and feel free to experiment.
| Problem. | Possible cause | Decision |
|---|---|---|
| Headphones fall out when moving | Too large size of the bottles or improper landing | Try S-size or scroll the earpiece in your ear for better fixation |
| Discomfort with prolonged wearing | Too small size of ear canals or pressure on the ear canal | Try the size L or take a break every 1-2 hours |
| Weak bass, external sounds heard | Poor sound insulation due to loose fit | Try the M or L size, make sure the earpiece is inserted deep |
| One earpiece sits tighter than the other | Asymmetry of the ear canals | Choose different sizes of earbuds for the right and left earbuds |
3. Step-by-step instruction: how to insert headphones into the ears
Even with the right earpieces, headphones can sit loose if worn incorrectly.
Hold the headphone by the body (not the ambushell)|
Place the earpiece at an angle of ~45° to the ear canal |
Easy scroll the earpiece in your ear for better fixation |
Check that the microphone hole is looking down (to the chin)|-->
Step 1: Take the earpiece in your hand so that the microphone hole (a small hole on the body) is directed down to your chin, which is important for the microphone to function properly during calls.
Step 2: Carefully pull the earlobe down and back a little to open the ear canal, which will help the earlobe sit deeper and tighter.
Step 3. Put the earpiece in your ear at an angle of about 30-45° (not strictly straight!). Lightly press and swipe the earpiece clockwise (for the right ear) or against (for the left ear). You should feel a slight "suction" - this is a signal that the earpiece is tightly tucked.
Step 4: Repeat the procedure for the second earpiece. After putting on, pull the headphones slightly -- if they don't move, the fit is correct.
What to do if the headphones fall out anyway?
4. Checking the correctness of landing: tests for comfort and sound
How do you know if your headphones are on correctly? Do some simple tests.
- 🎵 Soundproofing test: Turn on the music at medium volume and put your hand over your ear with your earpiece. If the sound is almost unchanged, the landing is tight. If the sound is quieter or the tambourine effect occurs, the earpiece is not tightly seated.
- 🏃♂️ Stability test: Actively turn your head left-right, tilt it back and forth, and if the headphones don't move or fall out, they're fixed correctly.
- 🗣️ Microphone test: Call a friend or record a voice message. Your voice should sound clear, without muting or noise.
If the headphones have passed all the tests, you can start using them fully, and if not, go back to the selection of the earpieces or repeat the process of putting on.
⚠️ Warning: Don't try to "get used to" improperly seated headphones! Prolonged wearing of inappropriate earpieces can cause irritation of the ear canal or even temporary hearing impairment due to excessive pressure.
5. Long-term wear tips: how to avoid ear fatigue
Even perfectly seated headphones can cause discomfort when used for hours at a time. Follow these tips to avoid fatigue:
- ⏳ Take breaks: Each 1-2 Take off your headphones for an hour. 5-10 A minute to rest your ears».
- 🧴 Ear hygiene: Clean your ear canals regularly of sulfur (but not cotton swabs!) to avoid pressure on your eardrum.
- 🔄 Alternate masks: If you have earpieces of different materials (silicone/foam), change them depending on the activity (for example, foam for sports, silicone for the office).
- 🌡️ Monitor volume: Long-term listening to music above 60% of maximum volume can lead to hearing fatigue.
If you are exercising, choose high-fixing bulges (such as ribbed surfaces) and sleep with flat ears that do not press on your ear when lying on your side.
💡
The optimal volume for long-term listening is 60 percent of the maximum, which reduces the load on hearing and prolongs the time of the headphones from a single charge.
6. Care and storage: how to prolong the life of headphones
Proper care of Xiaomi Earbuds Basic 2 not only preserves their appearance, but also affects sound quality and life.
- 🧼 Cleaning the bottles: Remove the bottles once a week and rinse them with warm water and soap. Dry naturally (do not use a hair dryer or battery!).
- 🧴 Cleaning cases: Wipe your headphones and case with a dry microfibre wipe. Use a cotton swab soaked in isopropyl alcohol to remove contaminants from your contacts.
- 🔋 Charging: Do not leave your headphones on charging more 24 It can reduce the battery capacity, and it can be optimal to charge it to the point where it's very low. 80-90% and keep out the full discharge.
- 🌡️ Temperature: Do not store headphones in places with temperatures above 40°C (for example, in the sun in the car) or below 0°C.
If the headphones are not used for a long time (for example, during vacation), store them in a dry place with a charge of about 50%.
⚠️ Warning: Never use aggressive chemicals (acetone, gasoline, bleach) or abrasives ( sandpaper, hard brushes) to clean your headphones, which can damage the coating and contacts.
7 Common Mistakes and How to Avoid Them
Many users make the same mistakes when using the Xiaomi Earbuds Basic 2, which lead to discomfort or breakdowns.
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Wearing dirty chords | Skin irritation, deterioration of sound insulation, accumulation of bacteria | Clean the bottles once a week, change them every 3-6 months |
| Storage of headphones outside the case | Loss of headphones, damage to contacts, quick battery discharge | Always put your headphones in the case after use |
| Using headphones during charging | Overheating of the battery, reducing the service life | Wait for a full charge before use |
| Wearing headphones during sleep (without special earbuds) | Discomfort, pressure on the ear canal, risk of damage to headphones | Use flat earbuds or special headphones for sleep |
Another common mistake is ignoring firmware updates, and Xiaomi periodically releases headphone updates that improve connectivity and sound quality to update the firmware:
- Connect your headphones to your smartphone via the Mi Home or Xiaomi Wear app.
- Go to Devices → Xiaomi Earbuds Basic 2 → Update firmware.
- If an update is available, follow the instructions on the screen.