How to charge the fitness bracelet Xiaomi Mi Band 4: full instructions with tips

The Xiaomi Mi Band 4 fitness bracelet remains one of the most popular activity-tracking gadgets despite the release of new models, its main advantages are compactness, functionality and long work on a single charge. However, many users face problems: the bracelet discharges quickly, does not turn on after charging or shows the wrong percentage of the battery, most often due to the wrong charging procedure, which over time spoils the battery.

In this article, we will discuss Xiaomi’s official guidelines, as well as practical tips to help avoid typical errors, learn how to determine if the bracelet is dead, how long it takes to fully charge, and what to do if the Mi Band 4 does not respond to the connection to the charger, and pay special attention to the hidden functions of the charging indicator, which are not mentioned in the standard instructions.

How to know if the Mi Band 4 needs a charger

Unlike smartphones, fitness bracelets rarely run out before they are completely turned off, with batteries designed to gradually reduce their charge, but there are a few clear signs that it’s time to connect the Mi Band 4 to the charger:

• 🔋 Screen Notification: At a charge level below 10%, the bracelet shows the red battery icon and vibrates.
• 📱 In-app Warning: Mi Fit or Zepp Life will have a push notification recommending charging the device.
• ⚡ Unintentional shutdowns: The bracelet is turned off when data is synchronized or during training.
• 🕒 Reduced operating time: if the charge was enough for 15-20 days before, and now - for 5-7, this is a signal about the need to charge or diagnose the battery.

It is important to consider that the Mi Band 4 does not have a low-charge audible alert – only a vibration and an icon on the display. If you missed these signals, the bracelet may turn off at the most inopportune moment, for example, while swimming (the model with waterproof 5 ATM).

Charging kit: what is included and how to check the serviceability

In the standard configuration of Xiaomi Mi Band 4 is a special charger that connects to any USB-It's a small unit with contacts and a magnetic mount, and here's how to use it properly:

1. Remove the bracelet capsule from the strap by pulling it towards the screen.
2. Connect the contacts of the capsule with the charging module - they should match in shape (protrusions and slots).
3. Connect. USB-cable to the power supply (preferably the original adapter Xiaomi on the 5V/1A).

Before the first charge, check:

• 🔌 Integrity of the cable: whether there are inflections, bare wires or traces of melting.
• 🧲 Magnetic fastening: the capsule must be securely fixed on charging without backlash.
• 💡 Indication: when connected to power on the bracelet screen should appear charging animation.

⚠️ Warning: If the charging indicator doesn’t appear, try another one. USB-port or cable. do not use power adapters with output current more 1A — This can reduce the battery life.

Check the integrity of the charging cable |

Remove the capsule from the strap |

Convert contacts before clicking |

Connect to USB-port 5V/1A|

Make sure that the charging animation appears on the screen.-->

Next Next post: How to Charge Mi Band 4 Properly

The charging process seems simple, but there are nuances that affect the battery life.

1. Turn off sync in the Mi Fit or Zepp Life app for charging time, which will reduce the load on the bracelet.
2. Connect the charger to USB-port of the computer or adapter. avoid using uncertified chargers.
3. Hold the capsule on the charging module until the characteristic click. Make sure the contacts match.
4. Wait for the indicator to appear - the battery animation with a percentage of charge should be displayed on the screen.
5. Charge to 100%, but do not leave the bracelet on charging for more than 2-3 hours after reaching full charge.
6. Turn off the power when the charge reaches 100%, and only then remove the capsule.

The average time to fully charge the Mi Band 4 is 1.5-2 hours. If the process takes much longer, check:

• 🔌 power supply (USB-The port may not provide sufficient current).
• 🔋 Battery condition (with severe wear, charging time increases).
• 📱 Bracelet settings (background processes, such as a permanent pulsemeter, slow down charging).

💡

If the bracelet is not charging, try to clean the contacts of the capsule and charger with a cotton swab dipped in alcohol. This will remove oxidation, which often causes poor contact.

What do the charging indicators on the Mi Band 4 screen mean?

The Mi Band 4 screen not only displays the percentage of charge, but also provides additional information about the process.

If a red cross appears on the screen, it signals a deep battery discharge below the critical level (2.7V).In this case, standard charging may not work - you will need to "reanimate" through a special device (available at service centers).

⚠️ Warning: If the bracelet does not turn on after 30 minutes on charge, do not try to disassemble it yourself.Mi Band 4 lithium polymer batteries are sensitive to mechanical damage and can ignite.

Typical charging errors and how to avoid them

Even experienced users sometimes make mistakes that shorten the battery life of the Mi Band 4, and here are the most common ones and ways to prevent them:

• 🔥 Use of non-original chargers: cheap Chinese adapters can produce unstable voltages, which leads to overheating of the battery. Solution: use only certified charging with output 5V/1A.
• ⏳ Recharging: leaving the bracelet on charge overnight or overnight accelerates battery degradation.Solution: Turn off power immediately after reaching 100%.
• 💦 Wet charging: even if the bracelet is waterproof (5) ATM), The charger contacts may oxidize.Solution: wipe the capsule with a dry wipe before charging.
• 🔌 Frequently charging to full discharge: Lithium polymer batteries do not like deep discharges. Solution: charge the bracelet at 10-20% charge, without waiting for the shutdown.

Another common problem is false charge display, like the bracelet is 100 percent, but it shuts down an hour later, and it's all about calibrating the power controller, so you can reset the error.

1. Discharge the bracelet until it is completely switched off.
2. Charge to 100% without interruption.
3. Repeat the cycle 2-3 times.

How to extend the battery life of Mi Band 4

The average battery life of the Mi Band 4 is 2-3 years when properly operated, but many users are faced with having to replace the battery within a year.

• 🔄 Avoid extreme temperatures: Do not charge the bracelet at temperatures below 0°C or higher than 40°C. Optimal range: 10–30°C.
• 📵 Turn off unnecessary functions: a permanent pulse meter, call notifications and screen lighting at maximum. These functions reduce the operating time by 30-40%.
• 🔋 Store with 40-60% charge: If you don’t use the bracelet for a long time (for example, during a vacation), charge it up to 50% and turn it off.
• 🔌 Use only the original charger: cheap analogues can damage the power controller.

It is also useful to periodically (every 3 months) perform battery calibration:

1. Discharge the bracelet before automatically shutting down.
2. Charge to 100% without interruption.
3. Repeat the cycle 2 times.

This helps to reset controller errors and restore an accurate display of the charge level.

💡

The optimal operating mode for a long battery life: charge at 10-20%, disconnect from power by 100%, avoid overheating and deep discharge.

Frequent questions about charging Mi Band 4