How to connect Xiaomi AirDots 2 to a smartphone: instructions with photos and videos

Xiaomi AirDots 2 wireless headphones (also known as Redmi AirDots 2) remain among the most popular budget headphones. TWS-However, many users have difficulty connecting first, especially if it comes to non-standard scenarios (for example, connecting to two devices at the same time or restoring communication after a reset). In this article, we will explore all possible ways of pairing, including solving typical problems faced by owners.

It’s important to understand that the AirDots 2 connection process differs from newer models (like AirDots 3 Pro or Buds 4) because of the firmware and hardware platform. If you’ve used other brands’ headphones (like Samsung Galaxy Buds or Apple AirPods), the usual algorithm may not work. We’ve taken all the nuances into account and prepared a universal instruction that will be suitable for both Android and iOS, as well as for connecting to laptops and tablets.

Before you get to the instructions, make sure your headphones are at least 30% charged, which is the minimum threshold for successful pairing. If the indicator on the case flashes red or doesn't burn at all, first plug it into charging for 10-15 minutes. Also check that the smartphone is enabled Bluetooth and not active. VPN-Connections that can block device search.

1. standard Xiaomi AirDots 2 connection to Android

For most users of Xiaomi or other Android smartphones (e.g. Samsung, Realme, POCO), the connection is via the standard Bluetooth menu.

1. Remove the headphones from the case. They should automatically turn on and go into pairing mode (the indicators on the headphones will flash alternately red and white).
2. On your smartphone, open Settings → Bluetooth and activate the search for new devices.
3. Find a device called Mi True Wireless EB2 Basic_R (The right earphone or Mi True Wireless EB2 Basic_L (Push it on the left.
4. Confirm pairing if you have a request. Once you've successfully connected, the headphones will light up in white.

If the headphones don’t appear on the list, try manually pairing them: press the touch button on both earphones simultaneously for 5-7 seconds until the indicators start flashing red and white. This method works even if the headphones were previously connected to another device.

Headphones charged at least 30% |Bluetooth on smartphone enabled | Headphones removed from case | No active VPN or flight mode-->

Xiaomi AirDots 2 support Bluetooth 5.0 protocol, but for stable operation it is recommended to keep the smartphone at a distance of no more than 10 meters from the headphones. In urban conditions or in the presence of obstacles (walls, furniture), the range can be reduced to 5-7 meters. If the sound is interrupted, try to reconnect or reset the headphones (more about this in the next section).

2. Connection to iPhone (iOS) and features of the work

While AirDots 2 is optimized for the Xiaomi ecosystem, it also works well with the iPhone (starting with iOS 12).

• 📱 No support. AAC-The headphones are used. SBC, What can affect the sound quality (especially on bass).
• 🔊 There's no charge indicator. Unlike Android, the iPhone doesn't display the battery level of the headphones in the status bar.
• 🎧 There's no automatic switching between devices. If you connect to multiple devices, you'll have to manually disconnect the headphones from one before you connect to another.

To connect AirDots 2 to your iPhone:

1. Open Settings → Bluetooth.
2. Take the headphones out of the case and wait until they appear on the list as Mi True Wireless. EB2 Basic_R.
3. Click on the name and wait for the pairing to be completed. If the process is stalled, reset the headphones (press the buttons for 10 seconds).

To improve the sound on the iPhone, you can manually select the SBC codec in the Bluetooth settings (if this option is available), and it is also recommended to disable the low-quality audio function in the special features settings, if it is activated.

Xiaomi/Redmi/Poco|Other Android (Samsung, Realme, etc.)|iPhone (iOS)|Laptop/PC (Windows/macOS)-->

3. Solving Connection Problems

If the headphones are not connected or permanently switched off, check the following points:

A critical feature of AirDots 2: if the headphones were connected to an iOS device and then you try to pair them with Android (or vice versa), a complete reset may be required.This is because different operating systems use different power management protocols, which sometimes leads to conflicts.

⚠️ Warning: If your headphones stop turning on after reset, check the contacts in the case for oxidation. Often the problem is the contamination of the connectors, not the software failure.

4.How to reset Xiaomi AirDots 2 to factory settings

Reset is required in three cases:

1. The headphones do not connect to any device.
2. One of the headphones does not work (for example, only the right one plays sound).
3. You want to sell or transfer the headphones to another person.

To perform the discharge:

1. Put both headphones in the case and close the lid.
2. Open the lid and press the touch buttons on both headphones at the same time.
3. Hold for 15-20 seconds until the indicators start flashing red and white alternately (this is a reset signal).
4. Release the buttons and wait until the headphones turn off.
5. Take them out of the case - now they're ready for a new pairing.

Once reset, the headphones will lose all previous connections, and they will have to be reconfigured. If the reset didn't work, try updating the firmware through the official Mi Home app (available for Android). For iOS, you can't update the firmware, which is one of the limitations of the platform.

5. Connect to a laptop or PC (Windows/macOS)

The process of connecting AirDots 2 to a computer is almost the same as pairing with a smartphone, but there are several specific points:

• 💻 Windows. 10/11 Update Bluetooth drivers via Device Manager before connecting.
• 🍎 On macOS, you may need to disable Handoff in Bluetooth settings if the headphones are not defined.
• 🎵 For better sound in the control panel → Sound select 16-bit, 44100 Hz format.

If the headphones are connected but there is no sound:

1. Check if they are selected as the default playback device.
2. Turn off other audio devices (such as speakers or headphones connected over a wire).
3. Reboot Bluetooth: On Windows, run at the command line: net stop bthserv &&net start bthserv

⚠️ Note: Some laptops with Bluetooth 4.0 (e.g. older Lenovo models or other laptops) HP) You may have trouble syncing stereo sound, so try connecting the headphones separately (right first, left first).

6. Additional functions and hidden capabilities

Many users are unaware that Xiaomi AirDots 2 supports several useful features that are not documented in the official manual:

• 🎶 Monosound: If you put one earpiece in a case, the other one will play the sound in mono mode (conversational).
• 🔋 Quick charge check. When you open the case lid, the indicator shows the charge level: 🟢 Green: over 60% 🟡 Yellow - 30-60% 🔴 Red - less than 30%
• 📞 Call auto-answer. Double-touch on any earphone takes incoming call (only on Android).

You can also activate low latency mode for games or video watching.

1. Connect the headphones to your smartphone.
2. In the Mi Home app, find the Mi True Wireless EB2 Basic.
3. Activate the Game Mode option (in some versions of the firmware it is called Low Latency).

Note that low latency increases battery consumption by 15-20%, and audio quality can also deteriorate due to compression of the audio stream.

💡

If you often lose your case from headphones, stick a contact tag on it or use a Bluetooth tracker (for example, Xiaomi Mi Band can be attached with a strap).

7. Comparison with other Xiaomi models

If you’re choosing between AirDots 2 and newer models, note the key differences:

AirDots 2 remains relevant due to its low price and reliability, but if you want quality sound or long battery life, it is worth considering newer models, for example, AirDots 3 Pro support LDAC and have active noise cancellation, which makes them a better choice for music.

💡

AirDots 2 is the best option for conversations and podcasts, but not for audiophiles.If you want a balance of price and quality, look for Redmi Buds 4 Active (about 2,000). ₽).

FAQ: Frequent questions about Xiaomi AirDots 2