How to connect a scooter Xiaomi M365 Phone: instructions with pictures and tips

Introduction: Why connect a scooter to a smartphone?

Xiaomi electric scooter M365 — One of the most popular compact vehicles for the city, but not all owners know that its functionality can be significantly expanded by connecting to a smartphone. Through the official Mi Home app (or its alternatives), you get access to real-time data on speed, battery level, mileage and even fault diagnosis. Moreover, some features – such as locking a scooter or updating a firmware – work exclusively through a mobile app.

In this article, we will analyze Step-by-step how to properly conjugate Xiaomi M365 with a phone on Android or iOS, what settings should be changed immediately after connecting, and what to do if the scooter “cannot see” the smartphone (or vice versa). You will also learn about the hidden possibilities that open up after synchronization, for example, setting up an energy-saving mode or calibrating the battery.

Note: The instructions are relevant for all modifications M365, including M365 Pro, M365 Pro 2 and clones (e.g. Ninebot) ES1/ES2), If you have a newer model (e.g. Xiaomi Mi Electric Scooter) 3/4), Some of the steps may be different – we will mention this separately.

What application do you need to connect?

Xiaomi officially recommends using the Mi Home app (formerly Mi Fit for some regions), but it has limitations: for example, in some countries, scooters may not appear in the list of available devices due to regional locks, in which case alternative programs come to the rescue:

• 📱 Mi Home is the official app from Xiaomi with support for most of the ecosystem devices.
• 🚀 Ninebot (by Segway) is an alternative to Xiaomi scooters, as Ninebot is their manufacturer.
• 🔧 ScooterHacking Utility (SHU) — application for advanced users with advanced settings (for example, acceleration to 30)+ Requires root rights on some devices.
• 🌍 M365 Tools is a utility for diagnosing and calibrating the battery, useful if the scooter has become worse at keeping the charge.

For most users, Mi Home or Ninebot is enough, and if you want to accelerate the scooter or access hidden parameters, you have to use the same system. SHU, This can result in loss of warranty and risk of damage to the controller.

Step-by-step: how to connect Xiaomi M365 phone-in

The pairing process takes no more than 5 minutes if you follow the algorithm.

• 🔋 The scooter is charged at least 20% (at low charge, Bluetooth can work unstablely).
• 📶 Bluetooth and geolocation enabled (required for Mi Home).
• 📱 The latest version of the app is installed (update to Google Play or App Store).

Now we're going to connect:

1. Turn on the scooter. Press the power button on the steering wheel, the indicator (green or blue) should light up.
2. Activate Bluetooth on your phone. Go to Settings → Bluetooth and turn on device search.
3. Launch the Mi Home app. If you don't have a Xiaomi account, sign up (you can use Google or Apple). ID).
4. Add a new device. Press. + → Scooter → Xiaomi M365. The app will start searching.
5. Confirm pairing. The scooter should flash the light, and the phone will request connection.
6. Wait for the synchronization. It can take up to 30 seconds, and after the successful connection, the scooter data will be displayed in the application.

If the scooter is not present, try:

• 🔄 Reboot Bluetooth on your phone (turn off/on).
• 📱 Reinstall the Mi Home app.
• 🔋 Remove and insert the scooter battery (sometimes resets errors of the Bluetooth module).

⚠️ Warning: If you use an iPhone, turn off Intermittent Bluetooth before connecting in charge saving settings. It can break the connection to the scooter.

Set up the parameters after connecting

After successful pairing, it is recommended to immediately configure the key parameters of the scooter.This will help to avoid problems in the future and optimize the operation of the device. Open the Mi Home app, select your Xiaomi M365 and go to the Settings section.

The main parameters that are worth checking:

Pay special attention to calibration of the battery. If the scooter shows an incorrect charge level (for example, drops sharply from 50% to 0%), calibrate:

1. Discharge the scooter until it's completely shut down.
2. Charge to 100% without interruptions (minimum 5 hours).
3. In the app, go to Settings → Calibration of the battery and follow the instructions.

💡

If after updating the firmware scooter became worse to accelerate, reset the settings to factory in the Settings section → Reset. This often solves power limitation problems.

Frequent problems and their solutions

Even after a successful connection, users face common errors, and let's look at the most common ones and how to fix them.

1.The scooter does not connect to the phone

Reasons:

• 📵 The Bluetooth scooter module is defective (often after falls or moisture hits).
• 📱 Power saving mode is enabled on the phone, blocking the background work of Mi Home.
• 🔄 Conflict with other connected devices (e.g. headphones).

Decisions:

• 🔧 Reboot the scooter (hold the power button for 10 seconds).
• 📱 In your phone settings, add Mi Home to the battery optimization exception list.
• 🔄 Disable all other Bluetooth devices and reconnect.

2. the application does not show real data

If the speed, mileage or battery charge is not displayed correctly:

• 🔄 Reconnect the scooter (forget the device in Bluetooth settings and mate again).
• 📱 Update the firmware of the scooter through the application.
• 🔋 Calibrate the battery (see previous section).

3.The scooter spontaneously disconnects from the phone

The blame is usually:

• 📶 Weak Bluetooth signal (for example, if the phone is in a pocket with metal objects).
• 📱 Background optimization Android/iOS, killing Mi Home.
• 🔋 Low battery charge of the scooter (less than 10%).

Solution: Move the phone closer to the steering wheel (like the mount), turn off the power saving for the app, and charge the scooter.

⚠️ Note: If the scooter stopped turning on after the firmware update, do not try to repeat the procedure - this may indicate damage to the controller. M365 Tools.

How to update the firmware of the scooter through the phone

Firmware updates for Xiaomi M365 They are rare, but they are critical to stability. New versions fix Bluetooth bugs, improve energy efficiency, and sometimes add new features (like Google Maps support for navigation).

To update the firmware:

1. Open Mi Home and select your scooter.
2. Go to Settings → Update firmware.
3. If a new version is available, click Update.
4. Wait for the process to be completed (the scooter must be on and still!).

Important:

• 🔋 The battery charge should be more than 50%.
• 📶 Connect your phone to Wi-Fi – Update “weighs” 10-50 MB.
• ⏳ Don't interrupt! This can lead to a "bricking" of the controller.

Alternative ways to connect (without Mi Home)

If the official application does not work (for example, due to regional restrictions), alternative methods can be used:

1.The Ninebot Appendix.

This app is from the manufacturer Xiaomi M365 (Ninebot makes scooters for Xiaomi, which are often better optimized and support more features:

• 📊 Detailed travel statistics (graphics of speed, energy consumption).
• 🔧 Adjustment of brake stiffness and gas response.
• 🚨 Adjustment of sound signals when exceeding speed.

Download Ninebot from the App Store or Google Play, select the model M365 Follow the connection instructions (similar to Mi Home).

2. ScooterHacking Utility (SHU) for advanced users

This is an application for enthusiasts, allowing you to:

• 🚀 Accelerate the scooter to 30-35 km / h (risk to the engine!).
• 🔧 Change the controller parameters (e.g. regenerative braking force).
• 📈 Reading errors from the controller in real time.

⚠️ Warning: use SHU may lead to:

• Lose the warranty.
• Overheating of the engine during acceleration.
• Bluetooth's unstable.

If you do decide, download it. SHU Only with GitHub to avoid viruses.

Security: How to protect the scooter from theft through the phone

Connecting to a smartphone opens up new opportunities, but also risks, and attackers can try to hack into a Bluetooth connection or reset the scooter settings to avoid this:

• 🔒 Turn on the scooter lock in the app. Without unlocking it through your phone, it won't start.
• 📱 Use two-factor authentication in your Xiaomi account.
• 🔄 Change your password from your Mi Home account regularly.
• 🚨 Set up suspicious connection notifications (in Settings) → Security).

If the scooter is stolen, you can:

1. Track its location via Mi Home (if enabled) GPS phone-on).
2. Remotely lock the engine (a feature available in Ninebot).
3. Contact the police with logs from the app (they contain the time of the last activity).

⚠️ Attention: Application locking does not work if the hijacker dropped the scooter to factory settings. Use a mechanical lock (e.g. Kryptonite) for reliable protection).

💡

Even with a phone lock, the scooter remains vulnerable to physical hacking, combining digital protection with mechanical protection (the cable lock, the alarm).

FAQ: Answers to Frequent Questions