Why connect Xiaomi scooter to a smartphone?
Xiaomi’s modern electric scooters are not just transportation, but smart gadgets with advanced features. Connecting to your phone through the official Mi Home app (or Mi Electric Scooter for new models) gives you access to mileage, speed, battery level and even allows you to customize driving modes. Without pairing, you lose half of the device’s capabilities.
For example, you can use the app to activate cruise control, update the firmware to improve stability, or get malfunction notifications, and you can also lock the scooter remotely if you leave it outside, but how to connect properly to avoid errors? Next, we will discuss the step-by-step instructions for the Mi M365, Pro 2, 1S, 3/4 Lite and others.
What scooters Xiaomi supports phone connection?
Not all Xiaomi models are mobile-friendly, and here is the current list of supported devices (as of 2026):
- 🛴 Mi Electric Scooter M365 (The first version requires a firmware update)
- 🛴 Mi Electric Scooter Pro/Pro 2 (full support of all functions)
- 🛴 Mi Electric Scooter 1S (improved version of the E-ABS)
- 🛴 Mi Electric Scooter 3/3 Lite/4 Lite (modern models with Bluetooth) 5.0)
- 🛴 Mi Electric Scooter Essential (budget version with basic features)
Models older than 2018 (M365 first batches) can require manual firmware updates via Mi Scooter Tools (unofficial software). New scooters (4 Pro, Electric Scooter S1) connect via the Xiaomi Home app (an updated version of Mi Home).
⚠️ Note: Ninebot by Segway Scooters (e.g. Max) G30), Despite the cooperation with Xiaomi, they use their own Segway-Ninebot application and are not compatible with Mi Home.
What you need to connect: preparing the phone and scooter
Before pairing, check three key points:
- Phone compatibility: The Mi Home app runs on Android 5.0+ or iOS 10.0+. Newer scooters (4 Lite) require Bluetooth 4.2 or higher.
- Battery charge: The scooter should have a charge level of at least 20%. At low charge, the Bluetooth module can be turned off.
- App permissions: On Android, give Mi Home access to geolocation, Bluetooth and notifications. On iPhone, turn on Geolocation Services (in your phone settings).
Also make sure that the scooter is unlocked (not in transport mode) - otherwise the Bluetooth module will be turned off. To exit the transport mode, hold the power button for 5 seconds until the green indicator appears.
Install the Mi Home app (or Xiaomi Home for new models)
Charge the scooter to 20% and above
Turn on Bluetooth on your phone
Allow geolocation for the application
Remove the scooter from the mode of transportation (hold the power button 5 seconds)
-->
Step-by-step: how to connect Xiaomi scooter to the phone
The pairing process takes no more than 5 minutes. Follow the instructions:
- Step 1. Turn on the scooter Press the power button once, the white indicator should light up. If the indicator flashes red, the scooter is discharged or locked.
- Step 2. Launch the Open Mi Home app (or Xiaomi Home for 2023-2026 models). Click + → Add the device → Scooter.
- Step 3. Select a model In the list, find your model (e.g. Mi Electric Scooter Pro 2). If it is not available, select Another scooter.
- Step 4. Start searching The application will request Bluetooth access and geolocation — allow. The scooter should emit an audible signal (one short beep).
- Step 5. Confirm pairing A code (e.g., 1234) will appear on the phone. Press the power button on the scooter to confirm the connection.
If the scooter is not detected, try:
- 🔄 Reboot Bluetooth on your phone (Settings) → Bluetooth → Off./On.).
- 📱 Remove the Mi Home app cache (Settings) → Annexes → Mi Home → Memory. → Clear the cache).
- 🔋 Remove and insert the battery of the scooter (only for models with removable battery).
💡
If the scooter emits a double beep when connected, it means a pairing error. Try resetting the Bluetooth settings on your phone or reinstall the app.
Scooter setting after connection: basic parameters
Once you pair successfully, you'll see tabs with settings in the app. Let's look at the key parameters:
| Parameter | Description | Recommended value |
|---|---|---|
| Driving mode | Limits maximum speed: Eco (15 km / h), Standard (20 km / h), Sport (25+ km / h). | Standard (for the city) |
| Cruise control. | Automatically maintains speed without gas retention. | Incl. (convenient for long trips) |
| Regenerative braking | Converts kinetic energy into battery charge when braking. | Medium (balance between efficiency and comfort) |
| Lockdown | Remote wheel lock through the application. | Includes (for security) |
| Update of the PO | Improves stability and adds new features. | Update when new versions appear |
Important: In Mi models 1S and newer available depreciation hardness setting (Settings tab) → Comfort. It's a unique function that's not in the system. M365 and pro.
⚠️ Warning: Regenerative braking to Strong can lead to a sharp slowdown when releasing gas - it is dangerous at high speed!
Common mistakes and their solution
Even with the right connection, users face problems.-5 errors and ways of eliminating them:
- 🚫 The scooter is not looking for the reason: Bluetooth module is disabled or scooter in transport mode. Solution: Hold the power button 5 seconds until the green light light comes on. If it doesn't work, reset the scooter settings (power button). + brake + gas).
- 🔴 "Unable to connect" Error Reason: Conflict with another Bluetooth device or outdated firmware Solution: Disable other gadgets (earphones, fitness bracelets) and update the scooter software.
- 🔄 The app is constantly breaking the connection Reason: Weak Bluetooth signal or phone background processes Solution: Close all applications in multitasking and bring the phone closer to the scooter (at a distance of 1-2 m).
- ⚠️ No mileage data displayed Reason: Reset meter after firmware update Solution: Roll 100+ Meters - Data will automatically appear.
- 📵 The scooter connects but doesn't respond to commands Reason: Incompatibility of the app version and firmware.Solution: Update Mi Home on Google Play/App Store and check for updates for scooter.
What if the scooter is connected, but does not show speed?
How to update the firmware of the Xiaomi scooter through the phone
The firmware update fixes bugs, improves stability and adds new features (e.g. Pedestrian mode in Pro 2).
- Open Mi Home and select your scooter.
- Go to Settings → Update firmware.
- If a new version is available, click Update.
- Wait until the scooter is completed (the scooter will emit a double signal).
- Reset the scooter (turn off and on).
Important: Do not interrupt the upgrade process! If the battery runs out during firmware, the scooter may fail (you will need to flash through ST-Link).
💡
Update your firmware only when the battery is above 50% and indoors – this minimizes the risk of failures.
Security: How to protect a scooter from hacking via Bluetooth
Connecting to a phone makes it easier to manage, but it also opens up risks.
- 🔓 Unlock the scooter remotely (if not enabled) PIN-defence).
- 📍 Track your location through geodata.
- ⚡ Change the speed or braking settings.
How to defend yourself:
- Turn it on. PIN-code in the scooter settings (Mi Home) → Security → Protection PIN).
- Turn off Bluetooth on the scooter when you are not using it (hold the power button 3 seconds until you blink blue).
- Do not connect the scooter to public Wi-Fi (the risk of interception).
- Check the list of associated devices regularly (Bluetooth Bluetooth Settings → Paired Devices).
⚠️ Attention: In the Mi 3 Lite and later, there is a "Safe Mode" function - it automatically blocks the scooter when falling (according to the gyroscope!