How to connect headphones Xiaomi True Wireless Earphones 2 Basic: full instruction with solutions to problems

Xiaomi True Wireless Earphones 2 Basic is a popular model among users due to the combination of high-quality sound, compactness and affordable price. However, even with such simple devices, beginners can have difficulties when connecting for the first time. This article will help you understand how to properly synchronize headphones with an Android smartphone, iPhone, Windows PC or Mac, and what to do if the device is not detected or connects with errors.

We will look not only at the standard Bluetooth pairing procedure, but also at the nuances of working with the Mi Earphones app, which expands the functionality of headphones. We will pay special attention to typical problems - from the lack of sound to the disconnection of the connection - and how to fix them. If you just unpacked the new pair of Xiaomi TWE 2 Basic or faced difficulties after updating the firmware, this instruction will be your guide.

Before you start, make sure the headphones are charged (the indicator on the case should be white or orange), and the device you are connecting to is Bluetooth on, and if the indicator on the case does not light at all, this is a signal of complete discharge, and you will first need to recharge the battery.

1. Preparation of headphones Xiaomi True Wireless Earphones 2 Basic to connect

Before you pair, you need to take your headphones out of the case and activate the search mode.

• 🔋 Charging the case and headphones: Connect the case to the power source (for example, through USB-C cable) for 10-15 minutes if the indicator is not on, it takes about 1.5 hours to fully charge, the headphones automatically charge in the case when it is closed.
• 🎧 Headphone Removal: Open the case cover - the headphones must turn on automatically (blitzes a white indicator on each of them).If this does not happen, press and hold the touchpad on any earphone for 3 seconds.
• 🔍 Pairing mode activation: The headphones go into search mode immediately after being removed from the case. If they have already been connected to another device, reset the settings: Place both earbuds in the case, then press and hold the button on the case (near the indicator) for 10 seconds until the indicator starts flashing red and white.

Note that if the headphones have previously been paired with another device, they can automatically connect to it the next time you remove them from the case, and to avoid this, remove them from the list of Bluetooth devices on the old gadget or reset as described above.

⚠️ Warning: Don't try to plug the headphones in separately, they only work in pairs. If one of the headphones doesn't respond to touch, check if the contacts in the case are clean and there are no physical injuries.

Charge the case (indicator burns white)|Remove both earphones from the case|Make sure the indicators flash white|Reset the settings if the headphones were connected earlier-->

2. Connect to Android smartphone (including Xiaomi, Redmi, POCO)

The process of pairing with Android devices is as simple as possible, but there are nuances for Xiaomi phones, where additional functions are available through proprietary software.

Steps for connection:

1. Open the settings on your phone and go to the Bluetooth section.
2. Activate Bluetooth if it is turned off.
3. Remove the headphones from the case, and the Mi True Wireless Earphones 2 Basic (or similar) will appear on the list of available devices.
4. Confirm the pairing if necessary.

For smartphone owners Xiaomi/Redmi/POCO It is recommended to install the Mi Earphones app from Google Play:

• 🎛️ Customize touch gestures (for example, double touch to trigger a voice assistant).
• 🔊 Adjust the equalizer and enable Game Mode to reduce sound latency.
• 📊 View the charge level of the case and each headphone separately.

If the headphones don’t appear in the list of Bluetooth devices, try:

• 🔄 Reboot Bluetooth on your phone (turn off and on again).
• 📱 Remove the Bluetooth app cache in your phone settings (Settings) → Annexes → Bluetooth → Warehouse → Clear the cache).
• 🔋 Remove the headphones from the case and wait 30 seconds – sometimes they do not immediately go into search mode.

Smartphone Xiaomi/Redmi/POCO|Another Android smartphone|iPhone|laptop|Other-->

3. Connection to iPhone or iPad

While Xiaomi True Wireless Earphones 2 Basic is optimized for the Xiaomi ecosystem, it works well with Apple devices (iPhone, iPad, Mac), but some features, such as customizing gestures through Mi Earphones, will not be available.

Instructions for iOS/iPadOS:

1. Open Settings and select Bluetooth.
2. Make sure the Bluetooth switch is active (green).
3. Remove the headphones from the case – they should appear in the list as Mi True Wireless Earphones 2 Basic.
4. Slip the name of the device and wait for the pairing to be completed.

Features of working with the iPhone:

• 🍎 No support. AAC-Codec: Headphones are used SBC, This can slightly reduce the sound quality compared to Android.
• 📱 Limited settings: You can’t reassign gestures or turn on Game Mode on iPhone.
• 🔋 Charge Display: The headphone battery level will be visible in the Bluetooth widget on the lock screen.

⚠️ Warning: If the headphones are connected but the sound is interrupted or there are interference, try turning off Wi-Fi on your iPhone – sometimes wireless networks interfere with Bluetooth connection at 2.4 GHz.

To improve the stability of the connection on the iPhone:

1. Forget the device in Bluetooth settings (Push on "i" → Forget this device).
2. Turn off and turn on Bluetooth again.
3. Reboot the iPhone.
4. Repeat the connection procedure.

4. Connection to PC (Windows) 10/11) Mac

PC interface is slightly different from mobile devices, especially when it comes to Windows, where drivers are sometimes required to be installed.

For Windows 10/11:

1. Open Settings → Devices → Bluetooth and other devices.
2. Activate Bluetooth and press Add Device.
3. Select Bluetooth from the list of device types.
4. Remove the headphones from the case, and Mi True Wireless Earphones 2 Basic will appear in the list. Click on it.
5. Wait until the driver is installed (if required).

If the headphones are connected, but the sound is not played:

• 🔊 Check if they are selected as a sound output device (right-click on the volume icon in the trey). → Open sound parameters).
• 🔄 Reboot Bluetooth: Open Task Manager, find the Bluetooth process, and restart it.
• 📥 Install drivers manually from the Qualcomm site (chipset) QCC3040), If Windows does not recognize the device.

For the Mac:

1. Open System settings → Bluetooth.
2. Click Turn Bluetooth on if it is disabled.
3. Remove the headphones from the case, they'll appear in the list. Press Connect.

On a Mac, headphones usually work without problems, but if the sound is interrupted, try:

• 🍏 Disable Handsoff in General settings → Transmission (sometimes interferes with Bluetooth stability).
• 🔋 Update macOS to the latest version – in the old versions were bugs with Bluetooth audio.

💡

If the headphones connect to a PC but the sound only goes to one headphone, open Control Panel → Sound, select the headphones and press Setup. Make sure you select the stereo, not the mono or phone.

5. Solving common problems

Even after a successful connection, users sometimes experience problems, and let's look at typical scenarios and how to fix them.

If the headphones are connected but quickly switched off:

• 🔋 Check the charge of the case and headphones - at a low level of the battery, the connection can break.
• 📱 Update the headphone firmware through the Mi Earphones app (if available).
• 🔄 Reconnect the headphones, previously removing them from the list of devices.

⚠️ Note: If after falling or getting moisture headphones stopped turning on, do not try to disassemble them yourself - this will lead to loss of warranty.

6. Additional settings and tips for use

To maximize the potential of Xiaomi True Wireless Earphones 2 Basic, take advantage of these tips:

• 🎵 Equalizer setting: The Mi Earphones app has preset profiles (Basic Boost, Pure Vocals, Balance) and experiment to match your preferences with the sound.
• 🎮 Activate Game Mode in the app settings – this will reduce the sound latency to 80-100 ms, which is critical for shooters or races.
• 🔕 Turn off microphone noise: In call settings, enable Noise Canceling to improve voice quality in noisy places.
• 🔋 Battery savings: If you don’t use headphones, put them in a case – they automatically turn off and start charging.

Touch management of headphones:

• 👆 One touch: Reproduction/pause.
• 👆👆 Double touch: Next track (right earpiece) / previous track (left earpiece).
• 👆👆👆 Triple touch: Calling the voice assistant (Google Assistant)/Siri).
• 👆 Holding 2 seconds: Deflection of incoming call.

Gestures can be reassigned in the Mi Earphones app (for example, set up a double touch to call the last app).

💡

For stable work of headphones regularly update the firmware through the official application and avoid connecting to several devices at the same time – this can cause conflicts.

7. Comparison with other Xiaomi models

If you’re choosing between Xiaomi True Wireless Earphones 2 Basic and other models of the brand, note the key differences:

Xiaomi True Wireless Earphones 2 Basic is the best choice for those who need inexpensive and reliable headphones without unnecessary features. If you want active noise cancellation or long-term autonomy, consider the TWE 2 or Air 2 Pro models.

Frequently Asked Questions (FAQ)