Xiaomi Mi True Wireless Earbuds Basic Connection: A Complete Guide with Tips and Life Hacks

Xiaomi Mi True Wireless Earbuds Basic wireless headphones have become a popular choice due to the combination of affordable price, compact design and acceptable sound quality. However, many users have difficulties with the first connection - especially if you have not previously worked with devices on a Bluetooth 5.0 chip. In this article, we will discuss not only the standard pairing procedure, but also nuances that are not written in the official instructions.

It's important to understand that Mi True Wireless Earbuds Basic (TWSEJ04LS) supports both Android and iOS devices, but the connection algorithm may be different. In addition, these headphones have a feature: they automatically go into pairing mode only when you first turn on or after you reset. If you've tried to connect them and nothing has worked, don't be quick to blame the manufacturer. Most likely, it's in the little things we'll talk about below.

1. Preparation of headphones for the first connection

Before you start pairing, make sure that the Xiaomi Mi True Wireless Earbuds Basic headphones are fully charged. The indicator on the charging case case should be lit white (when connected to the power) or green (when fully charged). If the indicator flashes red, the charge is below 20%, and the headphones can turn off during the setup.

To activate the pairing mode:

• 🔋 Get both headphones out of the case – they should automatically turn on (blinks a red/white indicator on each one).
• 🔄 If the indicators do not flash, press and hold the touchpad on the right earphone for 5 seconds until you hear the beep and see a flashing white/red light.
• 📱 Make sure your smartphone is enabled with Bluetooth (in the Quick Settings menu or Settings). → Connections → Bluetooth).

💡

If the headphones don’t respond to touch, try cleaning the touch panels with an alcohol napkin – sometimes contamination blocks the operation.

Note: Mi True Wireless Earbuds Basic does not support simultaneous connection to two devices. If you previously paired them with another gadget, you will first have to remove them from the list of devices on your old phone or reset (for this, see the error section).

2. Step-by-step instructions for Android

On devices running Android (including smartphones Xiaomi, Samsung, Realme, etc.) the connection process is as simple as possible, but there are nuances for different versions of the OS.

1. Open Settings → Bluetooth and activate device search.
2. In the list of available devices, find the Mi True Wireless Earbuds Basic (sometimes displayed as TWSEJ04LS).
3. Click on the headphone name and confirm the pairing. Some smartphones may require input. PIN-code - default is 0000 or 1234.
4. Wait for the sound signal in the headphones (voice message "Connected" in Chinese or English).

On Xiaomi smartphones with a shell MIUI 12+ after connecting, a pop-up will appear with a proposal to install the proprietary Mi Earphones app. Its installation is not required, but it is recommended for setting up the equalizer and updating the firmware.

Headphones are displayed in the list of connected devices|The headphones are on green.|The sound is played in both headphones.|Bluetooth Settings Has a "Media Audio" Item for Mi True Wireless-->

Important: Android 11 and later may require permission to access geodata for Bluetooth devices. If the sound is interrupted, check these settings in Settings → Apps → Permissions → Geolocation.

3. Connection to iPhone (iOS)

While Xiaomi Mi True Wireless Earbuds Basic isn’t certified for iPhone, it’s been successful with iOS 12 and later.

• 🍎 In the list of Bluetooth devices, headphones can be displayed as LE-TWSEJ04LS plainly TWSEJ04LS.
• 🔊 Sound notifications (such as low charge) will be in Chinese – this cannot be changed.
• 🎧 Automatic Ear Detection (automatic pause when removing the earphone) does not work – the music will play regardless of whether the headphones are on or not.

Instructions for iOS:

1. Open Settings → Bluetooth and turn on the search.
2. Click on Mi True Wireless Earbuds Basic in the list.
3. Confirm the conjugation (PIN-code not required).
4. Check the sound playback in the Control Point → Select the output device.

On the iPhone, you may have a problem with mono mode (sound only goes to one headphone).

1. Forget the device in Bluetooth settings.
2. Remove both headphones from the case and wait for the flashing indicators.
3. Connect again, starting with the right earpiece.

4. Common mistakes and their solutions

Even if you follow the instructions correctly, users face typical problems, and let's look at the most common ones and how to fix them:

If the headphones were previously connected to another device and now do not want to mate, reset the settings:

1. Put both headphones in the case and close the lid.
2. Open the lid and press the touch panels of both headphones simultaneously.
3. Hold for 10-15 seconds until the lights start flashing red and white alternately.
4. Close the case, reset is done. Now you can reconnect.

⚠️ Warning: Do not use metal objects (clips, needles) to reset - this can damage the touch panels!

5. Additional settings and life hacks

Once connected successfully, you can optimize your headphones, and here are some useful tips:

• 🎵 Install the Mi Earphones app (available on Android) to set up the equalizer, check the charge level and update the firmware.
• 🔋 To extend the running time, turn off voice notifications (in the app or through resetting settings).
• 🎧 For the best sound insulation, select the right embushures (there are 3 sizes in the kit: S, M, L).
• 🔄 If the headphones are often turned off, try turning off the energy-saving mode on your smartphone.

On Android, you can turn on the AAC codec for better sound (if supported by your smartphone):

1. Go to Settings → System → Developer (if there is no item, activate the developer mode by clicking 7 times on the Build Number in About Phone).
2. Find the Bluetooth Codec option and select AAC.
3. Reconnect the headphones.

On iPhone codec can not be changed, but you can improve the sound through the settings of the equalizer in Settings → Music → Equalizer. We recommend choosing a preset “More low” or “Rock” for a more saturated bass.

💡

Mi Earphones allows you to update your headphone firmware, which can solve connection and sound problems. Update your firmware only when the case charge level is above 50%!

6. Compatibility with other devices

Xiaomi Mi True Wireless Earbuds Basic can be connected not only to smartphones, but also to other gadgets with support for Bluetooth 4.2+.

• 💻 Laptops/PCs (Windows) 10/11): Use the Start menu → Parameters → Devices → Bluetooth. When connecting, select Headphones (not Hands Free) and switch off other Bluetooth devices (mouse, keyboards) for stable operation).
• 🎮 Game consoles (PS4/PS5, Nintendo Switch: On PS4/PS5 You need a separate Bluetooth adapter (the built-in module does not support headphones). On Nintendo Switch, you can only connect in Hands Free mode (the sound will be mono).
• 📺 Televisions (Android) TV, Smart TV): On the menu. TV Find the settings → Sound. → Bluetooth output, on some Samsung models or LG You may need to manually enter PIN-code (0000).

On a MacBook or iMac, the connection is standard through System Settings → Bluetooth, but there may be a problem with audio delay.

1. Open the audio. MIDI-Setting up (find through Spotlight).
2. Select Mi True Wireless Earbuds Basic from the list of devices.
3. Set the 44100Hz format, 16 bits.

⚠️ Warning: When connecting to Windows, some users experience a “failed to connect to the device” error, in which case, removing the Bluetooth driver in Device Manager and restarting the PC will help.

Care and extension of service life

To make Xiaomi Mi True Wireless Earbuds Basic last longer, follow the following simple recommendations:

• 🧼 Clean: Once a week, wipe your headphones and case with dry soft cloth. To remove earwax, use a cotton swab soaked in isopropyl alcohol (not ethanol!).
• 🔋 Charging: Don't leave your headphones in a case charging for more than 24 hours - this shortens battery life.Use the original cable USB-C or certified equivalent. Avoid charging at temperatures below 0°C or higher than 35°C.
• 🌧️ Protection against moisture: Despite the claimed protection IPX4, Don't use headphones in the rain or in the shower. Condensation can damage electronics.
• 📦 Storage: Keep your headphones in your case when not in use. Avoid direct sunlight and heat sources (e.g., near the battery).

If the headphones stopped holding the charge:

• Try battery calibration: completely discharge the headphones (before switching off), then charge to 100% without interruptions.
• If the case is not charging, check the cable and USB-C port for contaminants.

💡

To check the actual charge level of the case and headphones, use the Battery Info (Android) or CoconutBattery (Mac) application.

FAQ: Frequent questions about Xiaomi Mi True Wireless Earbuds Basic