How to connect Jabra headphones to Xiaomi phone: full instructions with solutions to problems

Connecting Jabra wireless headphones to Xiaomi smartphones seems like an easy task - but in practice users face pairing errors, communication interruptions or lack of sound.The problem is compounded by the fact that the Bluetooth protocol in Xiaomi devices (especially on the mobile phone). MIUI 14+) This article is about the most relevant ways to connect to all Jabra models (from Elite). 75t Up to Talk 45), including common bug solutions and hidden settings MIUI, which affect the stability of the connection.

We tested the instructions on Xiaomi smartphones 13 Ultra, Redmi Note 12 Pro+ and POCO F5 They've focused on the latest firmware, and they've focused on codec issues. AAC/aptX, Which arise when connecting to Xiaomi based on Android 13/14. If your headphones have already been paired with another device, do not miss the section about resetting Jabra settings, otherwise the connection may end with the error "Failed to connect".

1.Preparing Jabra headphones for connection

Before pairing with Xiaomi, make sure that Jabra headphones are in search mode. The activation process for this mode is different for different models - below is a universal algorithm that works for 90% of the brand's headsets.

If the headphones were previously connected to another device (such as an iPhone or MacBook), they must be reset to factory settings. Otherwise, Xiaomi may not detect the device or connect with errors.

• 🔋 Headphone Charging: Make sure Jabra is at least 30% charge.At low charge, the device may not appear in the list of available to connect.
• 🎧 Interface mode: For most models (Elite) 85t, 75t, 65t) Hold the power button for 5-7 seconds until the light flashes blue and white. For Jabra Talk series, press and hold the call button until the beep is heard.
• 📱 Disconnect from other devices: In Bluetooth settings on your previous device (if nearby), remove Jabra from the list of associated gadgets.

⚠️ Warning: Jabra Elite 7 Active and Elite 10 headphones have a hidden developer mode that blocks connection to some smartphones. If the indicator flashes green instead of blue, press both touch panels for 10 seconds to restart.

2. reset Jabra settings (if the connection fails)

If Xiaomi doesn't see the headphones or it gives you a "Didn't connect" error, the first thing you do is do a hard reset headset, which will remove all the saved pairings and return the factory settings.

After reset, the headphones will automatically go into pairing mode, and if that doesn't happen, manually activate it, as described in the first section. For models with multipoint support (simultaneous connection to 2 devices) after reset, this feature may need to be re-configured via the Jabra Sound app.+.

⚠️ Note: Reset removes all user settings, including EQ-Profiles and voice assistants binding if you used custom settings in Jabra Sound+, They'll have to be reconfigured.

3. Jabra step-by-step connection to Xiaomi via Bluetooth

Now let's move on to pairing. The instructions are relevant for all Xiaomi smartphones on the Internet. MIUI 12-14 and Android 11-14. If you have an older firmware version, update it via Settings → The phone. → Updating the system.

Detailed steps:

1. Open Bluetooth Settings: Go to Settings → Connections and sharing → Bluetooth. Activate the switch if Bluetooth is turned off. On some Xiaomi models (e.g. Redmi 10), the path may be different: → Bluetooth.
2. Find headphones in the list: The name of your Jabra model should appear in the Available Devices section (e.g., "Jabra Elite") 85t"). If the device does not appear, update the list by clicking on the icon. ↻ top-right.
3. Confirm pairing: Click on the headphone name. If you request a code confirmation (usually "0000" or "1234"), enter it. For models with advanced encryption (such as Elite 10), the code may not be required.
4. Check the connection: Once you pair successfully, the list will say "Connected." Run any audio file or video to make sure the sound is coming through Jabra.

A critical feature for Xiaomi MIUI 14+: After the first connection, go to Bluetooth Settings → Settings (⚙️) → Audio quality and select "Sound Quality Priority" that force the codec to activate. AAC, Improves sound and reduces delays.

💡

If the sound is interrupted when you play music, turn off the Absolute Volume option in your Bluetooth settings, a feature that often conflicts with Jabra's volume control algorithms.

4. Solving typical connection problems

Even after successful pairing, Xiaomi users are faced with bugs: the headphones turn off after 5-10 minutes, the sound is late or only in one headphone. Below are proven solutions for each of the problems.

Problem 1: Jabra is connected, but there is no sound

• 🔊 Check your Bluetooth profile: Go to Settings → Annexes → Application management → Bluetooth and reset the cache. Then reconnect the headphones.
• 🎵 Change the codec: In Bluetooth settings (near Jabra) select "Audio Codec" and try it out. SBC instead AAC.
• 🔄 Reboot your smartphone: Sometimes Bluetooth service MIUI A simple reboot solves the problem 70 percent of the time.

Problem 2: Headphones are constantly switched off

• 📶 Turn off Wi-Fi: On some Xiaomi models (e.g., Wi-Fi, POCO X3) There's a conflict between Wi-Fi and Bluetooth. Try turning off Wi-Fi or switching to 2.4 GHz instead of 5 GHz.
• 🔋 Check the battery: If Jabra charge is below 15%, the device can automatically shut down to save power.
• 🛠️ Update your headphone firmware: Launch the Jabra Sound app+ Check for updates to your model.

Problem 3: The sound is only in one headphone

This is a typical problem for Jabra Elite. 75t/85t When you connect to Xiaomi:

• 🔄 Reconnect the headphones: Remove Jabra from the list of Bluetooth devices and pair again.
• 🎧 Reset your headphone settings: As described in the second section.
• 📱 Activate Mono Mode: In Jabra Sound+ Go to Settings. → Sound mode and select Stereo (sometimes the smartphone mistakenly switches to mono mode).

5. Sound optimization and reduced delays

Even after a successful connection, users often complain about the latency of sound (especially in games or videos) and poor playback quality.This is due to the fact that Xiaomi defaults to the codec. SBC, It provides minimal delay but is of worse quality than AAC or.

To improve the sound:

1. Activate the codec. AAC: In Bluetooth settings (near Jabra) click on the icon ⚙️ and select "Audio quality" → Priority of sound quality. That's enforced to include AAC.
2. Turn off the sound processing. MIUI: Go to Settings. → Sound. → Sound effects and deactivate all options (Bass Amplifier, Equator) DSP Jabra.
3. Use the Jabra Sound app+: Download the official app from Google Play and in the "Sound" section, select the preset "Movie" or "Music" - this optimizes delays for video.

For gamers: If you play through Xiaomi with Jabra, activate Jabra Sound+ Low Latency mode (available for Elite) 75t/85t/10). That'll reduce the delay to 60–80 MS (against) 150–200 ms as standard).

💡

For the Jabra Elite 10 and Elite 7 Pro models, audio delay when watching videos on Xiaomi may be due to a codec conflict.Solution: in the developer settings (Settings) → Additionally. → For developers, disable the option "Bluetooth audio codec" AAC" and choose SBC manually.

6.Setting up voice assistant and control

Jabra supports integration with Google Assistant and Mi AI (But by default, voice control can be disabled to adjust:

• 🎤 Activation of voice assistant: Jabra Sound app+ Go to Settings. → Select the voice assistant and select "Google Assistant" or "Micro" AI" (If you use Xiaomi.eu firmware or global version MIUI).
• 🔘 Button settings: For models with physical buttons (like Jabra Talk 45) in Jabra Sound+ For example, double-pressing a call button can trigger a voice assistant or turn on/off noise cancellation.
• 📱 Permits for Mi AI: If you use Mi, AI, Go to Settings. → Annexes → Application management → Mi AI and enable permissions to access the microphone and Bluetooth.

For models with sensor control (Elite) 85t, 7 Pro at Jabra Sound+ can be tuned:

• Up/down swipe – Volume adjustment.
• Double touch – start the voice assistant.
• Triple touch - switching tracks.

⚠️ Attention: On Xiaomi smartphones with Xiaomi.eu firmware (castom) voice assistant Mi AI You may not be able to work with Jabra because you don't have a certificate.

7. Jabra firmware update via Xiaomi

Regular firmware updates for Jabra fix connection errors, improve Bluetooth stability, and add new features (e.g. support) LE Audio for Elite 10.You can only upgrade your headphones through the official Jabra Sound app.+.

Instructions:

1. Install Jabra Sound+ from Google Play (check that the app version is at least 5.0.0).
2. Connect the headphones to Xiaomi via Bluetooth.
3. Open the app and go to the "My devices" section" → Choose your own Jabra model.
4. If an update is available, a notification will appear "New firmware is available." Click "Update."
5. Do not turn off the headphones or close the app until the process is complete (usually takes 3-5 minutes).

After the update, the headphones will automatically restart. If the process is interrupted, reset the Jabra (section 2) and try again.

8. Alternative ways to connect (if Bluetooth does not work)

If Xiaomi's Bluetooth is damaged or Jabra headphones refuse to connect, alternative methods can be used. They are less convenient, but work 90% of the time.

Method 1: Connecting via Bluetooth adapter

If Xiaomi’s built-in Bluetooth module is faulty, buy an external adapter (e.g. Avantek). USB Bluetooth 5.0) And plug it in through. USB-C/OTG. Then:

1. Turn on the adapter and activate the pairing mode on Jabra.
2. In the Xiaomi Bluetooth settings, select the adapter as the source.
3. Connect the headphones to the adapter (they will appear as "Avantek Audio").

Method 2: Use the Bluetooth Auto Connect application

If Xiaomi doesn’t see Jabra, install the Bluetooth Auto Connect app from Google Play, which forcibly scans the devices and restores the connection:

1. Launch the application and press "Scan".
2. In the list, search for Jabra and select Connect.
3. If you have an error, click "Retry with different method".

Method 3: Connect via Jabra Direct (for PC, then port to Xiaomi)

If the headphones were previously connected to the computer, you can transfer their settings to Xiaomi via Jabra Direct (the official utility for the device). Windows/macOS). After setting up on the PC:

1. Disconnect Jabra from the computer.
2. Activate the pairing mode on the headphones.
3. Connect to Xiaomi – the settings of codecs and profiles will be saved.

💡

If the problem is in the Xiaomi module itself, contact the service center for Bluetooth antenna diagnostics (especially for Redmi Note models). 9/10, plume-line).

FAQ: Frequent questions about connecting Jabra to Xiaomi