How to connect Xiaomi headset to the phone: instructions for all models

Xiaomi’s wireless and wired headsets have long been an integral part of the brand’s ecosystem, offering users high-quality sound, convenience and stylish design. However, even with such simple devices, sometimes there are difficulties: the phone does not see the headphones, the sound is interrupted, or the headset refuses to connect after resetting. In this article, we will examine all possible ways of connecting, from standard Bluetooth pairing to manually adding the device through the developer’s settings.

Special attention will be paid to popular models of headsets: Xiaomi AirDots (all generations), Redmi Buds, Mi True Wireless Earphones, as well as wired versions with a Type-C connector or 3.5 mm. If you encounter an error "Device not found" or the headset connects, but there is no sound - here you will find solutions. And for owners of smartphones of other brands (Samsung, iPhone) we will give universal instructions.

1. Connection Preparation: What to Check Before Pairing

Before you start connecting, make sure your headset and phone are ready to go. 90% of the problems are due to basic omissions: a dead battery, an airplane mode is on or an outdated firmware.

Turn on Bluetooth on your phone

Charge the headset to 30% and above

Remove the headphones from the case (for TWS)

Disable other connected audio devices

Update the firmware of the smartphone (if available)-->

For wireless models (such as Xiaomi AirDots Pro 2 or Redmi Buds 4 Active), it is important to reset if the headset was previously paired with another device.

1. Put both earphones in the case.
2. Press and hold the button on the case (usually 10-15 seconds) until the indicator flashes red and white.
3. Get the headphones out - they will automatically go into pairing mode.

If you have a wired headset with a Type-C connector (e.g. Mi In-Ear Headphones Pro) HD), Check the integrity of the cable and the cleanness of the connector. On some Xiaomi models (for example, Mi 11 Ultra), when connecting wired headphones, you need to manually select the sound source in the notification panel.

2. Standard Bluetooth connection: step-by-step instructions

The most common way is Bluetooth pairing, which is suitable for all Xiaomi wireless headsets, including AirDots, Redmi Buds and Mi True Wireless.

1. Open the Settings. → Bluetooth on your phone and activate the function.
2. Take the headphones out of the case (for TWS) Or turn them on with the power button (for overhead models).
3. Wait until the name of your headset appears on the list of available devices (for example, “Redmi Buds 3 Lite”).
4. Click on the name and the pairing process will begin.
5. Confirm the connection if a request appears (sometimes you need to enter) PIN-default code 0000 or 1234).

On smartphones. Xiaomi/Redmi/POCO s MIUI 12 And then you can get a window that says, "You can install Mi Earphones," which is a proprietary app, but you don't have to install it, but you can get access to additional features:

• 🎵 Equalizer setting
• 🔋 Displaying the level of charge of headphones
• 🎧 Mode "Game" (reduced sound delay)
• 🔄 Update of the firmware headset

If the headset doesn’t appear in the list of devices, try:

• 🔄 Reboot the phone’s Bluetooth module (disable/enable the function).
• 📱 Reboot your smartphone.
• 🔋 Check the charge of the headphones (the indicator should burn white or blue).
• 📡 Make sure the headset is in pairing mode (usually a red/white LED flashes).

Xiaomi AirDots (any generation)

Redmi Buds (any model)

Mi True Wireless Earphones

Wired headset Xiaomi

Another mark.-->

Connecting a wired headset: Type-C and 3.5 mm

Despite the popularity of wireless devices, many users prefer wired headphones for stable connection and no delays. Depending on the model of the smartphone and the headset, the connection process may differ.

Headset with a 3.5 mm connector

If your phone is equipped with a standard audio jack (for example, Redmi Note 10 or the other one). POCO M3), enough:

1. Insert the headphone plug into the connector before clicking.
2. On the screen will appear a notification about the connection of the audio device.
3. If necessary, select the sound source in the notification panel (headphone icon).

On some models (e.g., Mi) 11 or Mi 12) plug-in 3.5 This will require a Type-C adapter. → 3.5 Note that not all adapters support the microphone! For a full-fledged headset with a microphone, choose adapters with a chip. ADC/DAC (For example, the original from Xiaomi).

Type-C headset

For headphones with Type-C connector (for example, Mi In-Ear Headphones Pro) HD):

1. Connect the plug to the charging port of the phone.
2. On the screen will be a request for permission to use the audio device – confirm.
3. If there is no sound, check: Clean connector (dust or dirt can block contact). Sound settings: Settings: Settings → Sound. → Sound output.

💡

If, after connecting the wired headphones, the phone continues to play sound through the speaker, try cleaning the connector with compressed air or a soft brush. Often the problem lies in oxidized contacts.

4.Problem Solving: Headset is connected but no sound

So, the situation where the headphones are successfully paired, but the sound is going through the speaker of the phone, is one of the most common.

If the problem persists, try resetting your network settings:

1. Go to Settings → System → Resetting of settings → Resetting of network settings.
2. Confirm the action (this will remove all stored Wi-Fi and Bluetooth devices).
3. Reboot the phone and repeat the pairing.

To connect through the application:

1. Download Mi Earphones from Google Play or App Store.
2. Connect the headset to the phone via Bluetooth.
3. Open the app – it will automatically determine the model of the headphones.
4. Follow the instructions on the screen to set up.

If the app does not see the headset:

• 🔄 Reconnect your headphones via Bluetooth.
• 📱 Restart the application.
• 🔄 Update your smartphone firmware (sometimes required) MIUI 12.5+).

💡

Mi Earphones doesn’t support all Xiaomi headsets, and if your headset isn’t identified, check compatibility on the official website or use universal apps like Bluetooth Auto Connect.

6 Connection to phones of other brands (Samsung, iPhone, Honor)

Xiaomi headsets are compatible not only with the brand’s smartphones, but also with devices from other manufacturers.

6.1 Connection to iPhone (iOS)

On the iPhone, the pairing process is standard, but:

• 🍎 Some models (such as AirDots) may not display the charge level.
• 🎵 To configure the equalizer, you will need a third-party application (for example, Equalizer Fx).
• 🔊 Possible problems with codecs (iOS uses the codecs) AAC, not aptX or LDAC).

Instructions:

1. Open Settings → Bluetooth.
2. Activate the pairing mode on the headset.
3. Select the headphones from the list.
4. If the sound is interrupted, turn off the “Low Bluetooth Power” feature in the iOS settings.

6.2 Connection to Samsung, Honor, Realme

On Android smartphones of other brands:

• 🤖 There may be problems with automatically switching profiles (for example, from microphone to headphones).
• 🔊 In some cases, you need to manually select Media Audio in the Bluetooth device settings.
• 🔄 To update the firmware of the headset may need a smartphone Xiaomi.

If the headset is connected, but the sound is late (relevant for games or videos), try:

• 🎮 Enable Low Lag mode in Bluetooth settings.
• 📱 Use applications like SoundAssistant (for Samsung) to manually configure audio routing.

7. Reset and flashing the headset: if nothing helps

If Xiaomi’s headset refuses to connect or doesn’t work properly even after all the manipulations, it may require a complete reset or firmware update. OTA-Updates (e.g. AirDots Pro 2 or Mi True Wireless Earphones 3).

7.1.Severe resetting of the headset

For most TWS- headphones:

1. Put both earphones in the case.
2. Press and hold the button on the case for 20 to 30 seconds until the indicator flashes red and white.
3. Get the headphones out - they will automatically go into pairing mode.

For overhead models (such as Mi Headphones):

1. Turn off the headset.
2. Press the power button and the volume button for 10 seconds.
3. After reset, reconnect.

Update to firmware

To update the firmware:

1. Connect the headset to the Xiaomi smartphone (required!).
2. Install the Mi Earphones app.
3. Open the “Update” tab and follow the instructions.

💡

If the headset stopped working after the firmware update, try rolling it back to the previous version. Contact Xiaomi support or find firmware on forums (for example, 4PDA).

8. Alternative ways of connecting: for experienced users

If standard methods don’t work, you can try manually adding the device through the developer’s settings or using third-party apps.

Adding the device manually

On smartphones Xiaomi with MIUI:

1. Activate Developer Mode: Go to Settings → About Phone → MIUI version and press 7 times.
2. Back to Settings → Additionally. → For developers.
3. Find the item "Installation of the package through USB" and turn it on.
4. In Bluetooth settings, click "Add Device" and select "Other".
5. Enter. MAC-Headset address (can be found on the box or in the documentation).

8.2 Use of third-party applications

If the regular funds do not help, try:

• 🔗 Bluetooth Auto Connect – for automatic connection.
• 🎵 Equalizer Fx – To adjust the sound.
• 🔍 Bluetooth Scanner – to find hidden devices.

FAQ: Frequent questions about connecting Xiaomi headset