Connecting Xiaomi Amazfit Bip to a smartphone: full instructions with pictures and tips

The Xiaomi Amazfit Bip remains one of the most popular fitness trackers thanks to its combination of affordable price, long-term autonomy and wide functionality. However, beginners often have difficulties with first connecting a device to a smartphone. In this article, we will discuss the entire process from installing an application to setting up notifications, as well as consider typical errors and how to fix them.

It's important to understand that the pairing procedure can vary depending on the watch model (Amazfit Bip, Bip S, Bip U or Bip 3) and the phone's operating system. We'll focus on the generic steps that will work for most versions, but point out the key differences where it's critical. If you've just unpacked the watch, don't rush to turn it on right away: get your smartphone ready first.

1. Preparation of the smartphone before connection

Before you start pairing, make sure your phone meets the minimum requirements.The Amazfit Bip watch is compatible with Android 5.0+ or iOS 10.0+ devices.

• 📱 Free space: The Zepp app (formerly Mi Fit) weighs around 100MB, plus space will be required for a data cache.
• 🔋 Battery charge: the phone must be at least 30%, otherwise the process may be interrupted.
• 📶 Internet connection: to download the application and synchronize the firmware of the clock.
• 🔒 Permits: Enable geolocation, notifications and contacts (required later).

On Android, it is further recommended to disable battery optimization for the Zepp app so that notifications come in stable. Go to Settings → Apps → Zepp → Battery → Battery Optimization → No Limits. On iPhone, it is enough to allow notifications in the app settings.

2.Installation and configuration of the Zepp application

The official Amazfit Bip watch management app is called Zepp (formerly Mi Fit), which can be downloaded for free from Google Play or the App Store. Avoid third-party sources, which can be fraught with viruses or outdated versions.

After installation:

1. Open the app and select the language (Russian is supported).
2. Sign up via email, phone number or Xiaomi/Google/Apple account.
3. Fill out the profile: specify gender, age, weight and height – this is necessary for accurate calorie and step calculation.
4. Allow access to notifications, contacts and geolocation (without this, calls and other information will not work). SMS-warning).

Important: If you’ve used Mi Fit before, data will automatically be transferred to Zepp when you first log in through the same account, but some settings (such as the order of screens on your watch) will have to be configure again.

Install the Zepp| app | Register an account | Fill in your personal data | Allow notifications and geolocation | Charge your watch to 50%+

-->

3. Switching on the clock and switching to pairing mode

Now prepare the Amazfit Bip watch itself:

1. Charge the device to at least 50% (charging indicator – flashing icon of the battery on the screen).
2. Press and hold the power button (right side button) for 3-5 seconds until the Amazfit logo appears.
3. After downloading, swipe left across the screen to open the menu.
4. Select Settings (cog icon) → Connect the device.

The watch will go into search mode, as signaled by a flashing blue indicator on the back. If the indicator does not blink, repeat the steps or restart the clock (hold the power button for 10 seconds).

4. Step-by-step pairing with the telephone

When the watch is ready to connect, follow the following steps in the Zepp app:

1. On the main screen of the application, click Add Device (the + icon in the upper right corner).
2. Choose from the list the model of your watch – Amazfit Bip (or Bip S/U/3, if you have a different version).
3. Confirm permission to access geolocation and Bluetooth.
4. Wait for the app to find the watch (they should appear in the list of available devices).
5. Click on your watch name and confirm pairing on both devices.

If the clock is not there, check:

• 🔄 Bluetooth is on on the phone and the clock is paired (blue flashes indicator).
• 📱 Distance between devices not exceeding 1 meter (walls and interference may block the signal).
• 🔋 Charge of watches not lower than 30% (at low charge Bluetooth can be turned off).
• 📲 Updates: Zepp may need to update the firmware of the clock before connecting.

Once paired successfully, the watch automatically synchronizes time, step data, and other parameters, a process that can take up to 5 minutes — don't interrupt.

💡

If the Amazfit Bip watch is connected but permanently turned off, try the “forget device” settings in your phone’s Bluetooth settings and repeat pairing again.

5. Set up notifications and basic functions

By default, the Amazfit Bip watch only shows basic call notifications and SMS. To set up alerts from instant messengers and other apps:

1. In the Zepp app, go to Profile → My Device → Notifications.
2. Turn on the Call Notice and Message Notice switch.
3. Click App Management and select instant messengers (such as WhatsApp, Telegram, Viber).
4. For Android: In your phone settings, allow Zepp to access notifications (Settings → Apps → Zepp → Notifications → Allow).
5. For iOS: Go to iPhone Settings → Notifications → Zepp and turn on the option to Show on the lock screen.

Note that on iPhones, notifications are limited by Apple's policies, such as the watch will not be able to show text messages from Telegram or Viber, just the facts of their receipt. There are no such restrictions on Android.

💡

On Android, the Amazfit Bip watch supports more features than on iOS, due to Apple's limitations. If you are critical of notifications from instant messengers, use your Android phone.

6. Updating the firmware and calibrating the sensors

After the first connection, Zepp will offer to update the firmware of the watch. Don't ignore this notification - new versions fix bugs, add features and improve autonomy.

1. Connect the watch to charging and make sure the charge is at least 50%.
2. In the Zepp app, go to Profile → My Device → Firmware Update.
3. Click Update and wait until the process is complete (don’t turn off Bluetooth!).
4. After the update, the clock will reset automatically.

It is also recommended to calibrate the sensors to accurately measure steps and heart rate:

• 👟 Stepper: Walk 20 steps with your phone in hand, then enter the actual number in Settings → Calibration of steps.
• ❤️ Pulsemeter: Put your watch on your wrist (2-3 fingers above the bone) and run the test in Settings → Heart rate.
• 🏃 GPS: for accurate running tracking, go out to the open area and wait for the satellites to fix (image icon) GPS clock-screen).

Note: if after updating the firmware clock stopped synchronizing, reset settings (Settings → Reset on the clock) and connect them again.

7.Typical errors and their solutions

Even if you follow the instructions correctly, users face problems.

⚠️ Note: If the Amazfit Bip watch is plugged in but not synchronizing data (steps, sleep, pulse), check the power saving settings on your phone. POCO You must manually disable optimization for the Zepp application in the Settings menu → Battery → Optimizing the battery.

If none of these methods worked, try:

1. Remove the Zepp app and install it again.
2. Reset the clock to factory settings (Settings → Reset).
3. Connect the watch to another phone for verification.

8 Additional settings for advanced users

After the basic setting, you can optimize the work of the clock for your needs:

• 🌙 Sleep Mode: Enable automatic sleep tracking in Settings → Sleep and set the alarm clock with vibration.
• 🏊 Swimming: activate swimming mode in Settings → Sports (Amazfit Bip watches waterproof up to 5) ATM).
• 🔋 Battery savings: Turn off the permanent pulsemeter (Settings) → Heart rate → Measurement) to increase autonomy.
• 🎨 Dials: download new dials in Profile → My device. → Dials (there are animated options).
• 📊 Data export: sync data with Google Fit or Apple Health in your account settings.

For Android users, the Music Management feature is available – you can switch tracks directly from the clock (works with Spotify, YouTube Music and a standard player).

If you are exercising, set up automatic activity recognition:

1. In the Zepp app, go to Profile → My Device → Sport.
2. Enable the Auto-Recognition option for running, walking and cycling.
3. Set target heart rate areas for exercise (e.g. 120-150 beats for cardio).

💡

To extend the life of the Amazfit Bip battery, disable notifications from unnecessary apps and reduce the brightness of the screen to 2-3 divisions.

FAQ: Frequent questions about Amazfit Bip