How to Reboot Xiaomi Mi True Wireless EBS Basic 2: All Ways

Xiaomi Mi True Wireless headphones EBS Basic 2 is a popular model TWS-These are devices that have a balance of value and quality, but even these sometimes require a forced reboot, and problems can range from sudden communication interruptions to no response to button presses. Most often, the failure occurs due to software errors, battery discharge or conflicts when connecting to several devices at the same time.

Unlike smartphones, where rebooting is intuitive, wireless headphones have nuances, such as the wrong reset can cause the left-right headphone to lose steam or even cause the device to fail completely. In this article, we will discuss all the official and alternative reboot methods, and explain when to use each one.

Why you need to reboot headphones Xiaomi EBS Basic 2

Rebooting (or hard reset) is not just turning off and on, it is a complete reset of the current state of the device, which helps in the following cases:

• 🔌 The headphones do not connect to the phone, although previously worked stably.
• 🔊 The sound is interrupted, interference appears or one earphone is silent.
• 🔋 The charge indicator flashes non-standard (for example, red-blue alternately).
• 📱 Mi Earphones app does not recognize the device.
• 🔄 Headphones spontaneously turn off after 5-10 seconds after connecting.

It's important to understand that rebooting is not like resetting to factory settings, which erases all the paired devices from the headphone memory, whereas a conventional reboot simply "resets" the current processes. If the problem is due to firmware or hardware damage (such as moisture), neither method will help, you will need repairs.

⚠️ Note: If the headphones Xiaomi EBS Basic 2 have been submerged or dropped from a height, rebooting can exacerbate the problem.In this case, dry the device completely first (at least 24 hours) and only then try resetting.

Official way to reboot through buttons

The manufacturer recommends the following algorithm for forced reboot:

1. Place both headphones in the charging case and close the lid.
2. Wait 10-15 seconds for the headphones to go out (this means they are completely off).
3. Open the case cover and remove the headphones.
4. Press and hold the touch buttons on both headphones simultaneously for 10-12 seconds.
5. Release the buttons when the indicators start flashing red and white alternately - this is a signal of a successful reset.

After that, the headphones will automatically go into pairing mode (the indicator will flash white), and now they can be connected to the phone as a new device.

Put your headphones in the case for 10 seconds |

Make sure the case is at least 20% charged |

Use the original charging cable |

Do not press buttons through fabric or gloves|-->

💡

If the indicators do not flash after holding the buttons, try to repeat the process, previously holding the headphones in the case for 30 seconds to completely turn off the power.

Alternative discharge methods

If the official method didn't work, try one of these options, which can help in cases where the headphones "hang" during the connection stage or do not respond to pressing.

Method 1: Through the Mi Earphones app

Mi Earphones (available for Android and iOS) not only allows you to customize the sound, but also diagnose problems.

1. Open the app and connect the headphones (if they are determined).
2. Go to the Settings section → Reset.
3. Confirm the action and wait for the process to be completed.

If the headphones don’t appear in the app, this method won’t work – use a hardware reset.

Method 2: Discharge to zero

This method should be used only as a last resort, since deep discharge can adversely affect lithium-polymer batteries of headphones.

1. Use your headphones until they are completely discharged (until they turn off).
2. Place them in the case and wait 1-2 hours (make sure the case is also discharged).
3. Connect the case to the charge and wait for the full charge (the indicator will turn green).
4. Remove the headphones – they should automatically restart.

⚠️ Warning: After a deep discharge, the headphones may charge longer than usual for the first 1-2 cycles. If the problem recurs, this may indicate battery wear.

Method 3: Reset via Bluetooth phone settings

Sometimes the problem isn't with the headphones themselves, but with the cache of the Bluetooth module of the smartphone.

1. On the phone go to Settings → Bluetooth.
2. Find Mi True Wireless EBS Basic 2 in the list of devices and tap on the icon ⚙️ (setting).
3. Select Forget the device (or Remove it).
4. Turn off and turn on Bluetooth on your phone.
5. Place the headphones in pairing mode (hold the buttons for 5 seconds until the white indicator flashes).

Table: Symptoms and associated discharge methods

Frequent errors in rebooting

Many users make the same mistakes that not only don't solve the problem, but can make it worse.

• 🔥 Pressing buttons through a fabric or case reduces sensor sensitivity. Always use clean dry fingers.
• ⚡ Interrupt the reset process – if you release the buttons ahead of time, the headphones can “hang” in an intermediate state.
• 🔄 Resetting your headphones too often causes the micro-contact buttons to wear out. 1-2 attempts are enough.
• 📵 Use a non-original charging cable – cheap cables may not provide stable voltage, causing failures.

Another common mistake is trying to reset your headphones when they're connected to your phone, always disconnect them from your device before you restart, or the process may not work out properly.

💡

If the problem is not solved after 3-4 attempts to reset, it is likely hardware, and further attempts only shorten the life of the device.

How to avoid problems in the future

To minimize the risk of failure, follow these guidelines:

• 🔋 Update your firmware regularly through the Mi Earphones app (if updates are available).
• 🧼 Clean the contacts of the case and headphones once a month with an alcohol napkin.
• 📴 Do not use headphones at temperatures below 0°C or higher than 40°C is bad for the battery.
• 🔌 Keep your headphones in your case, even if they are discharged – this protects against dust and mechanical damage.
• 📱 Do not connect headphones to multiple devices at the same time (for example, a phone and a laptop).

Also avoiding battery drainage is optimal, with a charge of 20 to 30 percent, which extends the life of lithium polymer batteries by 20 to 30 percent.

FAQ: Answers to Frequent Questions