How to Reboot Xiaomi Mi Band 4 Without Phone: All the Techniques Work

Xiaomi Mi Band 4

hard-set

Mi Fit

In this article, we’ll look at all the ways you can reboot the Mi Band 4 without your phone, from standard resets to hidden engineering techniques. You’ll learn how to bring the bracelet back to life if it’s frozen, not turned on, or needs to be cleaned before selling. Importantly, some methods can reset to factory settings, so prepare yourself in advance for losing step, training, and notification data.

If your bracelet is just slowing down, try a soft reboot first, which saves all the data. If the device doesn't respond fully, you'll need a hard reset that will return the Mi Band 4 to the factory settings, and we'll describe both options in detail, and we'll also explain how to avoid the typical reboot errors.

1. Mild reset: if the bracelet brakes or freezes

Soft reset is the equivalent of a smartphone restart, and it helps if the Mi Band 4 is getting glitchy, doesn't respond to swipes, thinks long when you tap on the screen, or doesn't show notifications, and the advantage of this is that all the data is saved, so you don't have to reset the bracelet and sync it to the phone.

For a soft reboot:

1. Press and hold the touch button under the Mi Band 4 screen for 10-15 seconds.
2. Wait until the screen goes out and then the Mi logo lights up again.
3. Release the button and wait 1-2 minutes until the bracelet is fully loaded.

If you have problems after the reboot, try updating your firmware through the Mi Fit app (when the phone becomes available) or move on to a hard reset.

⚠️ Warning: If the bracelet does not respond to the hold of the button, do not try to press it repeatedly - this can aggravate the freeze.

💡

If the soft reboot didn’t work the first time, repeat the procedure 2-3 times in a row. Sometimes the bracelet needs to “reboot several times” to restore performance.

Hard Reset: Full reboot to factory settings

A hard discharge is an extreme measure that is resorted to if:

• 🔄 The bracelet hangs on the Mi logo and does not load any further.
• 📵 Does not respond to touches and buttons.
• 🔋 No charge after charging.
• 📱 Complete cleaning is required before selling or transferring to another user.

Unlike a soft reset, a hard reset removes all the data from the wristband: notification settings, activity history, alarms and passwords. After the procedure, the Mi Band 4 will be like new — it will have to be reconnected to the phone via Mi Fit.

Hard-dumping instructions:

1. Disconnect the bracelet from the strap (carefully pull the lower part of the body).
2. Find on the back of the contacts for charging – there should be 5 (two extreme – for power, three central – for data).
3. Take a paper clip, toothpick or thin metal object and close the second and fourth contacts carefully (counting from left to right).
4. Hold the circuit for 10-15 seconds until the Mi logo appears on the screen.
5. Release contacts and wait for a full reboot (1-2 minutes).

If the bracelet doesn't turn on after reset, check the battery's power - it may have run out in the process, plug it into the charger for 30 to 60 minutes and try again.

3. Alternative method of resetting through hidden menu

Few people know, but the Mi Band 4 has a hidden engineering menu that allows you to reset without closing the contacts, which works if the bracelet is somehow responsive to touch, but not stable.

To open the hidden menu:

1. On the main screen of the bracelet, quickly touch the touch button (under the screen) 5 times.
2. After the fifth touch, hold the button for 5 seconds until a menu labeled RESET appears.
3. Swipe up or down, select the RESET option and confirm the choice by pressing the button.

The bracelet will reboot and return to factory settings, a method that is less risky than closing contacts, but does not work on all versions of the firmware.

⚠️ Note: If there is no item in the hidden menu RESET, Don't try to choose other options, this can lead to unstable operation of the bracelet.

4.Reboot via charger: if the bracelet does not respond

If the Mi Band 4 is completely dead — it doesn’t turn on, vibrate, or respond to buttons — try forced reboot via charging, a technique that often helps when the bracelet is dead or hovers due to a critical failure.

Instructions:

1. Connect the bracelet to the charger (original or compatible).
2. Leave it to charge for 10-15 minutes – even if the indicator is not on.
3. Then press and hold the touch button for 20-30 seconds.
4. If the bracelet has not responded, disconnect it from charging, wait 1 minute and repeat holding the button.

If that doesn’t work, try the charging + closing combination:

• 🔌 Connect the bracelet to charging.
• 🔧 Close the second and fourth contacts with a paper clip (as in hard reset).
• ⏱️ Hold the circuit for 20 seconds, then release.

This method works in 80% of cases where the bracelet appears completely dead, but is actually simply blocked due to a software failure.

5.What to do if the bracelet is not reloaded?

If none of these things worked, the problem could be hardware, like a board is damaged, contacts are broken, or the battery is out of order, and then software rebooting won't help.

If you suspect a physical breakdown, don’t try to disassemble the bracelet yourself – the Mi Band 4 has very fragile plumes that are easily damaged.

6. How to avoid hanging out in the future?

To ensure that the Mi Band 4 is stable and does not require frequent reboot, follow the following simple rules:

• 🔋 Do not allow a full discharge – charge the bracelet with 10-20% of the battery.
• 📱 Regularly update the firmware through Mi Fit (every 2-3 months).
• 🚫 Avoid sudden temperature changes (do not leave the bracelet in the cold or in direct sunlight).
• 💦 After training or shower, wipe the body from sweat and moisture.
• 🔄 Once a month, perform a soft reboot to clean the cache.

If you're actively using notifications, they can slow down the bracelet, so limit the number of apps that send alerts to the Mi Band 4, and that's going to reduce the load on the system.

It's also worth keeping track of the strap and the contacts, and over time, the strap can deform and push the button, causing false positives, and dirt on the charging contacts leads to poor connection and failures when updating the firmware.

💡

The most common reason for Mi Band 4 freezes is outdated firmware, and update it with Mi Fit as soon as possible, even if the bracelet is stable.

FAQ: Frequent questions about the reboot of Xiaomi Mi Band 4