The Xiaomi Mi Band 2 fitness bracelet is one of the most popular wearables, but even it sometimes requires a reboot. Screen freezes, sync errors with the Mi Fit app, incorrect display of step or pulse data are all problems that are often solved by a simple restart, but not all users know how to properly perform a reboot so as not to damage the device or lose stored data.
In this article, we will look at all the possible ways to reboot the Mi Band 2: from a standard soft restart to a forced reset for critical errors, and how to distinguish a simple freeze from a serious malfunction, and what to do if the bracelet does not respond to buttons, instructions are relevant for original devices and clones, but with the features of the firmware in mind.
Before you start rebooting, make sure the problem is not with a discharged battery. Connect the bracelet to the charger for 10-15 minutes - sometimes enough to restore performance. If the charging indicator does not light up, go to the methods below.
1.Soft reboot of Xiaomi Mi Band 2 bracelet
This is the safest way to restart, which does not delete user data (steps, pulse, alarm settings) and is suitable for eliminating small glitches: screen hanging, synchronization errors or incorrect display of time.
To perform a soft reboot:
- Remove the bracelet from your hand and place it on a flat surface.
- Find the touch button (also called touchpad) under the screen.
- Press and hold it for 10-15 seconds until the Mi logo appears on the screen.
- Release the button and wait for the full download (usually takes up to 30 seconds).
If the screen is not responsive to retention, try briefly pressing the button 5-7 times in a row at intervals of 1 second. Sometimes this helps to "wake up" the bracelet. After a soft reboot, check sync with the Mi Fit application - you may need to reconnect over Bluetooth.
💡
If the bracelet continues to glitch after a soft reboot, try disconnecting it from the Mi Fit app and then reconnecting it, which will reset the connection cache and often solve synchronization problems.
2. Forced reset (hard reset)
This method is used when the Mi Band 2 bracelet has completely stopped responding to presses, the screen is not turned on, or the device is stuck on the logo. Unlike a soft restart, a forced reboot can reset some temporary settings (for example, the current time), but does not delete activity data.
Instructions for forced restart:
- 🔋 Connect the bracelet to the charger (even if the battery is not discharged.
- 👆 Press the touch button and hold it for 20 to 25 seconds until the screen goes out and lights up again.
- 🕒 Wait for full load (may take up to 1 minute).If the screen flashes or displays an error, repeat the procedure.
If the bracelet does not respond even to a forced reboot, the problem may be a hardware malfunction (for example, a charging connector or a battery), in which case try resetting to factory settings (described in the next section) or contact the service center.
What if the bracelet is not turned on after restart?
3. Reset to factory settings
A full reset removes all user data from the bracelet, including:
- 📊 Steps, sleep and exercise statistics (if not synchronized with Mi Fit).
- ⏰ Settings of alarm clocks and notifications.
- 🔒 Data on pairing with the phone (reconnection will be required).
Use this method only if:
- 🔄 The bracelet is constantly reset or turned off.
- 📱 Cannot connect to the phone despite repeated attempts.
- 🛠️ You need to sell/transfer the device to another user.
To perform the discharge:
Charge the bracelet at least 50%|Turn it off the phone in Mi Fit|Press and hold the touch button 30.+ seconds until the vibration and the Mi logo appear|After restarting, connect the bracelet again through the application-->
Once reset, the bracelet will return to the box-like state.
- Download the latest version of Mi Fit (or Zepp Life for new firmware).
- Register the device again via Bluetooth.
- Set up a user profile (gender, age, weight) to count calories correctly.
Once a week | Once a month | Only in severe glitches | Never rebooted-->
4.Reboot via the Mi Fit app
If the bracelet is responsive to pressing, but it's not working smoothly, you can do a software restart through an official application, which is safer than manual reset, because the firmware controls the process.
Instructions:
- Open Mi Fit and go to the Profile section → Mi Smart Band 2.
- Select the Device Settings option (or additionally, depending on the version of the application).
- Scroll down and click Reboot the device.
- Confirm the action and wait for the process to be completed (the bracelet vibrates and reboots).
If the app does not have a reboot button, upgrade to the latest version of Mi Fit or use an alternative method:
- 📱 Turn off the bracelet from your phone in Bluetooth settings.
- 🔄 Perform a soft reboot (Section 1 of this article).
- 🔗 Connect the device again via Mi Fit.
This method is useful if the bracelet syncs with the phone, but works with errors (for example, incorrectly counts steps or does not show notifications).
5. Solving common errors after rebooting
Sometimes, after a restart, the Mi Band 2 doesn't behave properly, and the table below shows the typical problems and ways to fix them.
| Problem. | Possible cause | Decision |
|---|---|---|
| The bracelet is not synchronized with the Mi Fit | Failure of Bluetooth connection or app cache | Remove the bracelet from the device list in your phone settings. Clear the Mi Fit cache in the app settings. Reboot the phone and reconnect the bracelet. |
| The screen flashes or displays artifacts | Damage to the firmware or display contacts | Reset to factory settings. If it doesn't work, contact the service (the plume may malfunction). |
| The bracelet discharges quickly after rebooting | Background processes or outdated firmware | Update the firmware through Mi Fit. Turn off unnecessary notifications in the bracelet settings. |
| Vibration does not work when notifying | Failure of settings or hardware malfunction | Check the notification settings in Mi Fit. Reset and reset the bracelet. |
If none of the methods worked, the problem may lie in the hardware (battery, board, display).In this case, we recommend contacting an authorized Xiaomi service center or considering replacing the device - repairing the Mi Band 2 bracelets is often economically impractical due to their low cost.
💡
Before resetting to factory settings, be sure to sync the data with Mi Fit! After a complete reset, the unsynchronized statistics will be lost without the possibility of recovery.
6.How to avoid frequent reboots: Care tips
To ensure that Xiaomi Mi Band 2 works consistently and requires less restart, follow these recommendations:
- 🔋 Charge the bracelet correctly: Use only the original cable or certified counterparts. Do not leave the device charging for more than 2 hours after reaching 100%. Avoid charging at extreme temperatures (below 0)°C or higher than 40°C).
- 📱 Update your firmware and app: Check for updates in Mi Fit regularly. Remove the app cache every 1-2 months.
- 🚿 Protect against moisture and mechanical damage: Although the bracelet has protection IP67, Do not immerse it in water deeper than 1 meter. Avoid impacts - the screen of the Mi Band 2 is not protected by Gorilla Glass.
Important: if the bracelet began to spontaneously reboot more than 1 time a day, this may indicate battery wear or damage to the board. In this case, rebooting is only a temporary solution, and the device will soon require replacement.
The average lifespan of the Mi Band 2 is 2-3 years when used actively. If your bracelet is older, consider upgrading to a new model (such as the Mi Band 7 or Mi Band 8), where firmware stability and battery life are improved.
FAQ: Frequent questions about the reboot of Xiaomi Mi Band 2
❓ Can I reboot the bracelet without a button (if it breaks)?
❓ Why does the bracelet show the wrong time after rebooting?
❓ How to distinguish between bracelet freeze from discharged battery?
❓ Can I sew the bracelet myself if rebooting does not help?
❓ How long does it take to fully reload the bracelet?
If your Xiaomi Mi Band 2 hasn’t worked after all the manipulations, it may be time to consider replacing it. Modern models (such as the Mi Band 8) offer improved stability, enhanced functionality and longer lifespan. However, even the outdated Mi Band 2 can last for more than one year if properly maintained, most importantly, respond to the first signs of malfunction.