How to disable Xiaomi Mi Band 5: all the ways and nuances

Why would you want to shut down Mi Band 5?

The Xiaomi Mi Band 5 fitness bracelet is designed as a device with minimal power consumption, so the manufacturer did not provide a classic on/off button. However, there are situations when a complete or partial disconnection of the bracelet becomes necessary.

For example, you may experience a system freeze after a firmware update, when the screen stops responding to touch and notifications are not synced with the smartphone. Another common case is preparing the device for long-term storage (more than 3 months), when the battery discharge to zero can lead to irreversible loss of capacity, and shutdown is required before resetting to factory settings if you transfer the bracelet to another user.

It is important to understand that the Mi Band 5 does not support hot shutdowns like smartphones. All power manipulations are done through software menus or hardware combinations that many users do not even know about. In this article, we will discuss all the official and hidden ways to deactivate the device, and also explain how to avoid typical errors.

Method 1: Software disabling through the bracelet menu

The safest method is to use a built-in menu, which is suitable if the bracelet screen responds to touch, and the firmware is not damaged.

1. Unlock the Mi Band 5 screen by swiping your finger up the display.
2. Scroll through the menu to the left until you find the item More (three dots at the bottom of the screen).
3. Select Settings → System → Turn off.
4. Confirm the action by clicking the tick. The bracelet vibrates and goes out in 3-5 seconds.

Charge the bracelet to at least 20% | Disconnect it from the Mi Fit/Zepp| app | Make sure there are no notifications on the screen | Backup the data in the app-->

This method doesn't reset -- after you turn on (through charging), all your data, including your steps, pulse, and alarm settings, will be saved, but if the bracelet freezes while you're off, you'll have to use a hardware reset.

💡

If the "Stop" option is not on the menu, update the bracelet firmware via the Mi Fit or Zepp Life app. In older versions of the software, this option may have been hidden.

Method 2: Forced shutdown via charging cable

When the bracelet does not respond to touch or menu is not available, you can use a hardware reset. This will require the original charging cable Mi Band 5 (important: not universal). USB-cable!). Action algorithm:

1. Remove the bracelet capsule from the strap.
2. Connect it to the charger with the back side (contacts up).
3. Hold the button on the cable (if you have one) or just wait 10-15 seconds.
4. The bracelet should vibrate and reboot. If that doesn't happen, unplug the cable and try again.

⚠️ Warning: Do not use unoriginal cables - they can damage the contacts of the bracelet. Also avoid multiple connections / disconnects for a minute: this can damage the power controller.

This technique mimics hard reboot and helps 80 percent of freezes, but it doesn't guarantee a complete shutdown, because the bracelet can turn on again when it's recharged, and deep shutdown requires a combination of sensor retention.

Method 3: Completely shut down through sensor retention

A little-known method that works even on a damaged screen bracelet, and it uses a hidden hardware shutdown function:

1. Remove the capsule from the strap and place it on a flat surface with the screen down.
2. Find the touch button on the back (a small recess next to the charging contacts).
3. Hold it for at least 20 seconds with a thin object (clip, toothpick).
4. The bracelet should vibrate three times and turn off. If the vibration was single, repeat the hold.

This method is the only way to completely de-energize the bracelet without connecting to the charger, and is useful if you plan to store the Mi Band 5 for more than six months or transport it in extreme temperatures.

Method 4: Disconnect via Mi Fit/Zepp Life

If the bracelet is synchronized with a smartphone, you can initialize the shutdown remotely. This method is suitable for devices with firmware 1.0.3.14 and later:

1. Open the Mi Fit or Zepp Life app.
2. Go to your bracelet profile (Devices → Mi Band 5).
3. Select the device settings → Additional → Turn off the bracelet.
4. Confirm the action in the dialog window.

Note that remote shutdown does not work on all versions of the software. If the bracelet does not respond after clicking on the option, try updating the firmware through Settings → Software update in the same application.

Once a month to reboot | Only before long storage |Never turned off |Only when it freezes |I don't know how to do it-->

What to do if the bracelet is not turned off?

If neither method worked, the problem could be a hardware or software failure.

• 🔋 Battery discharged: Connect the bracelet to charging on 1-2 If the indicator does not light up, check the cable and the power supply (should be) 5V/1A).
• 🔄 Firmware freeze: Hold the touch button for 30 seconds, then plug it into charging. If the screen flashes but doesn't turn on, flashing requires a flashing.
• 💧 Moisture intake: Put the bracelet in a dry place for 24 hours (do not use a hair dryer.
• 🔌 Damaged contacts: Check the charging contacts on the capsule - they should be clean and not bent.

⚠️ Warning: If the bracelet overheats while charging or produces an unpleasant odor, immediately turn it off - these are signs of a battery failure!

For devices with a "brick" (complete failure), you may need to flash through Mi Fit in recovery mode.

1. Hold the touch button for 20 seconds


2. Connect to charging - should light up the red indicator




3. In the Mi Fit app, select "Restore Device"

How to properly turn on the bracelet after disconnecting

Turning on Mi Band 5 after a full shutdown is different from normal activation.

1. Connect the bracelet to the charger. Wait for the charging indicator (red or green LED) to appear.
2. If the screen does not turn on automatically, tap the touch button once.
3. When first turned on after reset, re-synchronization with the Mi Fit application may be required.

The first turn on after a deep shutdown can take up to 2 minutes, which is normal. If the screen says "No Service", update the firmware through the application.

💡

After long storage (more than 3 months), let the bracelet completely discharge and charge 3 times in a row - this will restore the battery capacity.

Frequent Mistakes and How to Avoid Them

Many users make critical mistakes when working with Mi Band 5, which lead to breakdowns.

• ⚡ Use "fast" charging 18W+: The bracelet controller is designed to 5V/1A. More powerful power supplies could put it out of action.
• 🧲 Store near magnets: Strong magnetic fields (such as from speakers) knock down the compass and can damage the step sensor.
• 🔥 Dry with a hair dryer or on a battery: Overheating above 45°C deforms the battery. Dry only at room temperature.
• 🔧 Disassemble the capsule yourself: A leakage disorder leads to dust on heart rate sensors.

Also avoid frequent shutdowns – this reduces the life of flash memory. It is optimal to reboot the bracelet every 1-2 months or before updating the firmware.

FAQ: Answers to popular questions