How to reset the Xiaomi bracelet: reset to factory settings in 5 minutes

The Xiaomi Mi Band fitness bracelets have become an integral part of the daily lives of millions of users, but even the most reliable device sometimes requires a “reset.” Resetting the bracelet can be necessary in a variety of situations, from banal interface glitches to preparation for sale or transfer to another person. However, not everyone knows that improper resetting can lead to data loss, inability to synchronize or even “brick” the device.

In this article, we will discuss all the current ways to zero Xiaomi bracelets – from the newest Mi Band 8 and Smart Band 7 Pro to the time-tested Mi Band 3/4. You will learn how to reset through the Mi Fitness app (formerly Mi Fit), using hardware buttons, and what to do if the bracelet stopped responding to touch after zeroing.

When you need to reset the Xiaomi bracelet to factory settings

Device zeroing is an extreme measure that should only be used in certain cases, and many problems can be solved more easily by restarting the wristband or reinstalling the app, but there are situations where a complete reset is inevitable:

• 🔄 Bracelet brakes or freezes - the screen does not respond to touches, the menu opens with a delay, the data is synchronized incorrectly.
• 📱 Synchronization problems – Mi Fitness app doesn’t see the device, data isn’t updated, notifications don’t come.
• 🔒 Change of ownership – before selling or transferring the bracelet to another person, you need to remove the link to the account.
• 🔧 Errors after updating the firmware - if after the update there were bugs (for example, the pulsemeter or pedometer does not work).
• 🛡️ Suspicion of virus or hacking – if the bracelet begins to behave suspiciously (self-sends data, includes functions).

It is important to understand that the reset removes all local data from the wristband: activity history, alarm settings, personal goals. However, some information (for example, statistics from past months) can be stored in the Xiaomi cloud if sync was enabled.

⚠️ Warning: If you drop the bracelet before selling, be sure to untie it from your Xiaomi account through the app. Otherwise, the new owner will not be able to link the device to his profile.

Method 1: Reset via Mi Fitness (recommended method)

The safest and easiest way to reset the bracelet is to use the official app, which is suitable for all models supported by Mi Fitness (formerly Mi Fit), including the latest versions, the main advantage is the minimum risk of errors, since the process is controlled by software.

Step instructions:

1. Open the Mi Fitness app on your smartphone and make sure the bracelet is connected to your phone via Bluetooth.
2. Go to the Profile section → My devices and choose your bracelet.
3. Scroll down and find the Untie Device option (in some versions, Remove Device).
4. Confirm the action. The system will suggest that you save the data in the cloud, and you can choose the option you want.
5. After unbundling, return to the main menu of the app and add the bracelet as a new device again. During the setup, select Reset to factory settings.

If your app doesn't have an explicit "Reset" item, don't worry: the device's unset automatically initializes the reset on the bracelet itself, and after reconnecting, you'll have to reconfigure all settings, just like when you first switch on.

Method 2: Hardware reset via button (for Mi Band 3/4/5/6)

If the bracelet is not synced to the phone or the app can't see the device, you can reset directly on the gadget itself. This method works for models with a physical button (Mi Band 3/4/5/6). For Mi Band 7/8 and Smart Band 7 Pro, it is not suitable - they have touch control.

Algorithm of action:

1. Disconnect the bracelet from your phone (turn off Bluetooth or remove the device from the list of conjugated in the smartphone settings).
2. On the bracelet itself, go to the menu, holding the button for 3-5 seconds until the vibration appears.
3. Scroll through the menu to Settings (cog icon) and select it.
4. Find the Reset option (may be called Reset or Reset Settings) and confirm the selection.
5. The bracelet will reset and the Mi logo will appear on the screen, which means that the reset was successful.

If the bracelet screen does not respond to touch, try a forced reboot:

1. Connect the bracelet to the charger.


2 Hold the button for 10-15 seconds until you feel vibration.




3. Release the button - the device will restart.

⚠️ Attention: On Mi Band models 5/6 After the hardware reset, the pedometer calibration may be lost. 100 manual steps and confirm calibration in the application.

Method 3: Reset for Mi Band 7/8 and Smart Band 7 Pro (touch models)

In the non-physical button bracelets (Mi Band 7/8, Smart Band 7 Pro), the reset is done via the touch menu, a bit more complicated due to the lack of tactile feedback, but with accurate follow-up of the instructions, there will be no problems.

Step-by-step:

1. Scroll through the main menu of the bracelet to the right until you find the Settings icon (cog).
2. In the settings menu, scroll down to the optional item (or System in some firmware).
3. Select Reset and confirm the action by touching the tick.
4. The bracelet will start the zeroing process (the load indicator will appear on the screen), and after rebooting it will be ready for a new setup.

If the touch screen doesn’t respond, try the following trick:

• 🔋 Connect the bracelet to the charger.
• 📱 Hold your finger on the screen for 20 seconds until the Mi logo appears.
• 🔄 After restarting, try resetting again through the menu.

On Mi Band 8 models with an always-on display (AOD) after reset, this feature may need to be re-activated in the screen settings.

💡

If the bracelet does not respond to touch, try to wipe the screen with an alcohol tampon - sometimes fat deposits or sweat are the cause.

What to do if the bracelet does not turn on after resetting

In rare cases, after resetting, the bracelet may "hang" on the Mi logo or not show signs of life at all. This does not always mean a breakage - often the problem is solved by simple actions.

Here's what we can do:

If none of these methods worked, there may have been a critical firmware error, in which case only flashing through special software (e.g. Mi Band Tools or Notify & Fitness) will help, but this method requires experience and is only suitable for advanced users.

How to recover data after resetting

One of the biggest fears users have about deleting the bracelet is losing their activity history. Fortunately, Xiaomi has built backup mechanisms — but they don’t always work.

Where to look for stored data:

• ☁️ Xiaomi Cloud – If sync was enabled, most of the statistics (steps, sleep, workouts) will be saved in your account. → My accomplishments.
• 📱 Local copy on the phone - some data can be stored in the cache of the application. Try to reinstall Mi Fitness - the first start the system will prompt you to restore the backup.
• 💾 Exports to Google Fit/Apple Health – if integration was previously configured, data could be duplicated in these services.

If data is lost irretrievably, set up automatic backup for the future:

1. Open Mi Fitness and go to Profile → Settings → Xiaomi account.
2. Enable the option of Data Sync in the cloud.
3. Set the backup frequency (recommended daily).

For models Mi Band 7/8 is available the function Export data in CSV format.

1. In the app, select a bracelet.


2. Go to Statistics → More (three dots) → Export data.




3. Specify the period and confirm the export.

💡

Even after a reset, some data (such as activity records) can be saved in the Xiaomi cloud if sync has been enabled.

Frequent Mistakes and How to Avoid Them

Many users experience problems after a reset due to ignorance of the nuances, and here are the most common mistakes and ways to prevent them:

• 🔌 Reset on discharged bracelet – if the charge level is below 20%, the device may turn off during zeroing, which will cause a firmware failure. Always charge the bracelet to at least 50% before resetting.
• 📵 Interrupting the process – if you turn off Bluetooth or remove the bracelet from charging during the reset, the system partition can be damaged).
• 🔄 Using unofficial firmware – after zeroing, some users try to install custom software. This can lead to blocking functions (for example, NFC Mi Band 6 NFC).
• 📲 Untimely update of the application – if you do not update Mi Fitness to the latest version after reset, the bracelet may not connect due to incompatibility of protocols.

Pay special attention to the Mi Band 5 NFC model. After resetting, this device requires re-assignment of the bank card for contactless payments.

• Does your bank support Mi Pay technology?
• Is NFC activated in the bracelet settings?
• Is the Mi Pay app on the phone updated?

If after resetting the bracelet began to discharge quickly, perform the calibration of the battery:

1. Discharge the bracelet until it is completely switched off.
2. Charge to 100% without interruption.
3. Repeat the cycle 2-3 times.

FAQ: Answers to Frequent Questions