How to set up Xiaomi Earphones headphones 2: full instruction from connection to fine tuning

Xiaomi Earphones 2 are wireless headphones in the TWS format, which combine a compact design, high-quality sound and easy control. However, even such simple at first glance gadgets have a lot of hidden features that many users do not know. Proper tuning will not only improve the sound, but also prolong battery life, and eliminate typical problems such as communication breaks or improper gestures.

In this article, we’ll take a look at the entire setup process from scratch, from the first smartphone connection to the subtle settings in Mi Fitness’s proprietary app (formerly Mi Wear), focusing on solving common bugs that occur when pairing with Android and iOS devices. If you’ve just unpacked your headphones or have been using them for a long time, but want to unleash their potential, this is the guide for you.

1. Preparation of headphones for the first connection

Before you start pairing, make sure that the Xiaomi Earphones 2 headphones are fully charged. The package comes with a compact case with a charge indicator — if it burns red, connect the case to the power source for 30 to 60 minutes. Green signals 100% charge.

• 🔋 Case Charge: If the indicator does not light up when you press the button, the case is discharged.
• 📱 Bluetooth version on your smartphone: Bluetooth 5.0 or newer is needed for stable operation (check in Settings) → The phone. → Bluetooth version).
• 🎧 Clean contacts: wipe metal connectors on headphones and in the case with a dry wipe - oxidation can interfere with charging.

If you've used headphones before, you'll need to reset them to the factory settings.

1. Put both headphones in the case and close the lid.
2. Press and hold the button on the case for 10 seconds until the indicator flashes red and white.
3. Open the lid - the headphones are now ready for a new pairing.

⚠️ Warning: If the indicator on the case flashes only red, this indicates a critical charging error. Try using another cable or power supply. If the problem persists, contact the service center.

2. Interface with Android and iOS: step-by-step instructions

Connection process Xiaomi Earphones 2 The smartphone depends on the operating system. On Android (especially on devices). Xiaomi/Redmi/POCO) The pairing is almost automatic, while the iPhone may require additional actions.

Connecting to Android

1. Open the case cover - the headphones should automatically go into pairing mode (the indicator flashes white).

2. On your smartphone, go to Settings → Bluetooth and turn on device search.

3.In the list, find Mi True Wireless Earphones 2 (or Xiaomi Earphones 2) and tap it.

4. Confirm pairing - after that, the headphones will connect automatically with each extraction from the case.

Connection to iPhone (iOS)

The iPhone algorithm is similar, but there are nuances:

• 📱 If the headphones are not displayed in the list, close and reopen the case cover - this will reset the pairing mode.
• 🔄 After connecting, check that a profile is selected in the Bluetooth settings. A2DP (for music, not HFP (call-in).
• 🎵 To work properly, disable Bluetooth on other devices that previously connected to these headphones.

If the headphones are plugged in but the sound is interrupted or missing, try:

Settings → Bluetooth → (i) next to Mi Earphones 2 → Forget this device

Then repeat the pairing again.

Headphones are displayed in the list Bluetooth|Indicator on the case burns white (does not blink)|The sound is played in both headphones |The charge level is displayed on the smartphone-->

3. Gesture control and button functions

Xiaomi Earphones 2 supports touch control, but its setting depends on the firmware and model of the smartphone.

On Xiaomi/Redmi/POCO devices with MIUI 12+, gestures can be reassigned via the Mi Fitness app:

1. Open Mi Fitness and go to Devices → Xiaomi Earphones 2.
2. Select the Control Settings.
3. Slip on the desired gesture and select a new action (for example, double tap to call Google Assistant).

⚠️ Note: You can’t reassign gestures on iPhones, they only work in the standard configuration. Also note that when you hold a button for more than 3 seconds, the headphones can reboot.

💡

If gestures are triggered by accident (such as walking), reduce sensor sensitivity in the Mi Fitness app settings or put on your headphones tighter.

4. Sound setting: equalizer and playback modes

The sound of Xiaomi Earphones 2 can be significantly improved with the built-in equalizer. On Xiaomi devices for this:

1. Open the settings → Sound → Equator.
2. Choose a Xiaomi Earphones profile (if it’s on the list) or create your own.
3. Adjust sliders for bass (60-250 Hz) and high frequencies (4-16 kHz).

For owners of other smartphones, third-party applications will be suitable:

• 🎛️ Wavelet (Android) – supports automatic tuning for your headphones.
• 🎧 Equalizer FX — simple equalizer with presets for TWS-headphone.
• 🍎 Boom 3D (iOS – Improves spatial sound, but requires a subscription.

Important: The headphones support AAC (for iOS) and SBC (for Android) codecs, but do not have aptX or LDAC. This means that for maximum sound quality on Android, it is better to use applications that support SBC-HQ (for example, Poweramp).

5. Update firmware and problem solving

The firmware of the headphones affects the stability of communication, sound quality and gestures. Updates are rare, but installation is mandatory.

1. Connect the headphones to your smartphone.
2. Open Mi Fitness and go to Devices → Xiaomi Earphones 2 → Firmware Update.
3. If a new version is available, follow the instructions on the screen.

Typical problems and their solutions:

⚠️ Note: If your headphones stopped working after the firmware update, don’t try to roll back the version, which can lead to a complete loss of functionality. Contact Xiaomi support with the model and firmware version (you can see it in Mi Fitness).

💡

Updating your firmware through Mi Fitness is the only official way. Don't use third-party firmware, it voids your warranty.

6. Optimization of battery life

The manufacturer claims up to 4 hours of playback on a single charge and up to 12 hours with a case, but the actual time depends on the settings.

• 🔊 Turn down the volume to 60-70% – each +10 dB reduces the working time by 20-30 minutes.
• 📵 Disable unnecessary functions: if you do not use the voice assistant, deactivate it in the gesture settings.
• 🔄 Use mono mode: if you listen to music through only one earphone, the second automatically turns off, saving charge.
• 🌡️ Avoid extreme temperatures: Charging the case at temperatures below 0°C or higher than 40°C reduces battery life.

To check the current charge of headphones and case:

• On Android: Open Mi Fitness or Bluetooth widget in the notification bar.
• On iOS: Add the Battery widget to the home screen (slip right → Edit → add Batteries).

If the case is discharged too quickly, check:

• 🔌 Cable and Power Unit: Use the Original Cable USB-C power-wise 5W.
• 🔋 Battery status: If the case holds a charge for less than 2 hours, it is time to replace it.

7 Additional Features: Voice Assistant and Game Mode

Xiaomi Earphones 2 supports several hidden features that can be activated via Mi Fitness:

• 🎮 Game mode: reduces the latency to 80-100 ms (useful for games and videos.
• 🗣️ Voice Assistant: By default, activated by triple touch, but can be reassigned to double tap.
• 🔇 Transparent mode: allows you to hear surrounding sounds without removing headphones (included in Mi Fitness) → Sound settings).

To activate the game mode:

1. Open Mi Fitness and select Xiaomi Earphones 2.
2. Go to Additional Settings → Low Delay Mode.
3. Turn on the option and restart the headphones (put in the case for 10 seconds).

⚠️ Warning: Game mode increases battery consumption by 15-20%, only use it when necessary.

💡

If the voice assistant doesn’t respond to touch, check if it’s enabled in your smartphone settings (Settings → Apps → Google/Assistant).

8. Reset to factory settings and troubleshooting

If the headphones are not working correctly (do not connect, do not charge, reset the connection), perform a full reset:

1. Put both headphones in the case and close the lid.
2. Press and hold the button on the case for 15 seconds until the indicator flashes red and white.
3. Open the lid - the headphones will reset to the factory settings.

After discharge:

• 🔄 Repeat the process of pairing (see Section 2).
• 📲 Update the firmware through Mi Fitness.
• 🔊 Check the sound in both headphones.

If the reset did not help, use the diagnostic table:

If the headphones are completely stopped, try:

1. Put them in the case and connect the case to charge for 1 hour.
2. Press and hold the touchpads on both headphones for 10 seconds.
3. If the indicators do not respond - hardware malfunction (requires repair).

💡

The factory reset removes all user data, including device binding. Once reset, the headphones will appear as new in the Bluetooth list.

Frequently Asked Questions (FAQ)