How to wear headphones Xiaomi Redmi: instructions for wired and TWS-model

Xiaomi Redmi headphones are a popular accessory among music lovers and active users, but even a simple procedure like putting them on can raise questions. Incorrectly worn headphones not only reduce the sound quality, but also cause discomfort with prolonged use, and in the case of a headphone, it can cause problems with the use of the headphones. TWS-In this article, we will discuss the nuances for different types of headphones of the brand, from classic wired Redmi Earbuds to flagship wireless models.

We'll focus on ergonomics, how to get the ears right so that they don't fall out when you're running or exercising, and we'll look at some of the common mistakes that users make, like, for example, many people don't know that in a neck strap model like the Redmi Neckband Pro, the position of the microphone affects the quality of your voice when you're making calls, and if you've just purchased a headphone or want to improve your experience with it, this guide is for you.

Xiaomi Redmi Headphone Types: How Are They Different?

Before you put on your headphones, it’s important to understand which model you’re dealing with. Xiaomi has several lines under the Redmi brand, each with its own approach:

• 🎧 Wired headphones (Redmi Earbuds S, Redmi Hi-Res Audio) - classic "plugs" with a 3.5 mm connector or USB-C. Main feature: fixation behind the ear and silicone embushures.
• 🔗 Wireless with neck strap (Redmi Neckband Pro, Redmi SonicBass) - connected by magnetic contacts, have a flexible cable-bezel for wearing around the neck.
• 🎛️ Fully wireless (TWS) (Redmi Buds 4, Redmi AirDots 3 Pro are two separate headphones synchronized over Bluetooth.

The type of headphones not only determines how you wear them, but also the algorithm for connecting them, TWS-And the models require pre-synchronization with the phone, and the wired ones require the right ear girth for a stable landing. If you use headphones for sports, look at the models with the right ears. IPX4 or IPX5 — They have enhanced fixation and protection from sweat.

Preparing headphones for the first use

Even if you think the headphones are ready to work out of the box, a few simple steps will help you avoid problems in the future:

1. Check the package. In a box with Redmi Buds or Redmi Earbuds should be: 📦 The headphones themselves (and the charging case for the TWS-model). 🔄 Replacement ambusheries (usually) 3-4 size: S, M, L, XL). 📑 Instructions with QR-Download the Mi Home or Xiaomi Wear app. 🔌 Charging cable (USB-C microUSB, depending on the model).

Charge the headphones.

Install the app

Mi TrueWireless Stereo

Redmi Buds 4 Pro

Xiaomi Wear

If you've ever bought a used headphone, make sure you reset.

1. Put both earbuds in the case.
2. Press and hold the button on the case (or the touchpad on the headphones) for 10-15 seconds until the indicator starts flashing red and white.
3. After resetting, the headphones will disappear from the list of conjugated devices in the phone's Bluetooth settings.

💡

If Xiaomi Redmi headphones don't turn on after charging, try cleaning the contacts in the case with a cotton swab dipped in alcohol. Often the problem lies in the oxidation of metal sites.

How to wear Redmi (Earbuds, Hi-Res Audio) wired headphones

Wireless headphones Xiaomi Redmi usually have a bezel design — wires around the ear, providing additional fixation.

1. Pick out the earpieces. Take the earpiece and put it on the ear. If it sits too loose or causes pressure, change it to a different size. To check, pull the earpiece down slightly, if it doesn't fall out, it's a good size.
2. Identify left/right ear. Most models (e.g. Redmi Hi-Res Audio) have L (left) and R (right) labels on the wire. Put your headphones on so that the wires go down along your cheeks.
3. Hold the rim. Carefully circle the wire around the top of the auricle (see diagram below), it should fit tightly, but not press.
4. Adjust the length of the wire. Use the clip (if any) to lock the wire on your clothes and avoid jitters.

If the headphones are constantly falling off while moving, try the "cross-wear" method:

1. Skip the wire from the right earphone under the collar of the clothing to the left side (and vice versa).
2. Hold the wire with a clip at chest level, which will reduce tension and prevent loss.

Selected earpieces of suitable size |

The wire covers the ear without rubbing the skin.|

Headphones do not fall out when tilting the head |

The sound is clear, without any extraneous noise.-->

Instructions for wireless headphones with neck strap (Neckband)

Models like the Redmi Neckband Pro or Redmi SonicBass Wireless have a unique design: two headphones are connected by a flexible collar that is worn around the neck. The main rule is that the strap should lie loose, without squeezing the throat, but also not hanging.

Step-by-step:

1. Disconnect the magnetic headphones. Carefully spread them to the sides - they should automatically turn on (the indicator flashes).
2. Put a strap around your neck, and make sure that the microphone (usually on the right wire) is closer to your mouth for better voice transmission.
3. Put the earbuds in your ears. Use the twisting method: slightly twist the earbud in the ear canal so that the earbud sits tightly.
4. Adjust the length of the wires. Some models (like the Redmi Neckband Pro) have sliders to change the length of the cables.

For active noise reduction (ANC) models after wearing:

1. Press the power button for 2 seconds to activate the ANC.
2. In the Xiaomi Wear app, select the noise reduction level (e.g., “Transport” or “Office”).

⚠️ Attention: If the Redmi Neckband headphones spontaneously turn off when walking, check the density of the fitting of the earpieces. Too loose fit leads to microvibrations, which the system perceives as a command to pause.

How to wear it right TWS-Redmi headphones (Buds, AirDots)

Xiaomi Redmi’s fully wireless headphones (like Redmi Buds 4 or Redmi AirDots 3 Pro) require a special approach due to the lack of wires. The main task is to ensure a stable fit so that the headphones do not fall out when moving and respond correctly to touch commands.

Wearing algorithm:

1. Take the headphones out of the case. They should automatically turn on and connect with each other (the indicators flash white).
2. Identify left/right ear. Most models have L/R markings on the inside. Redmi Buds 4 Pro headphones are asymmetrical in shape, with the right slightly larger than the left.
3. Put headphones in your ears: 🔄 Slightly pull the ears up and back to open the auditory canal. 🎯 Place the headphone at an angle of 45° And scroll it a little so that the earpiece sits tightly.

Check the fixation.

For models with wear sensors (e.g. Redmi AirDots 3 Pro):

• 🎧 Headphones automatically pause music when removed from the ear.
• 🔋 To disable this feature, go to Bluetooth Settings. → Redmi Buds → Wear sensor.

⚠️ Warning: If the sound seems to be muffled after putting on, don't turn the volume to maximum! Most likely, the embroideries don't fit tightly. Try a bigger size or slightly rotate the earphone in your ear for better sealing.

💡

For Redmi Buds models with Mi TrueWireless Stereo support, be sure to update the firmware through the Xiaomi Wear app.This improves connection stability and adds new features (such as adaptive ANC).

Synchronization of headphones with the device

Even perfectly worn headphones are useless unless they're connected to the sound source.

For wired models (3.5 mm or USB-C):

The connection is automatic when the plug is inserted into the connector. However, on Xiaomi smartphones without a 3.5 mm port (for example, the Redmi Note 12 Pro), you will need a USB-C adapter.

• 🔌 Headphones with a connector USB-C (For example, Redmi Hi-Res Audio Type-C can not work with adapters – only with a direct connection.
• 🎵 To activate high-resolution audio (Hi-Res Audio) in the phone settings, select Settings → Sound. → Sound quality → High.

For wireless models (Bluetooth):

Instructions for TWS and Neckband:

1. Activate pairing mode: For TWS: take the headphones out of the case and hold the touchpad on both headphones for 3 seconds. For Neckband: hold the power button for 5 seconds until the indicator flashes red and blue.

Redmi Buds/AirDots/Neckband

0000

If the headphones are not connected:

• 🔄 Reboot Bluetooth on your phone (Settings) → Bluetooth → Off./On.).
• 📱 Remove the headphones from the list of conjugate devices and reconnect.
• 🔋 Check the charge level of the headphones (indicator on the case or in the Xiaomi Wear app).

💡

For a stable connection, turn off Bluetooth energy-saving mode on your phone (Settings → Battery → Power Saving Mode → Disable for Bluetooth).

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when using Xiaomi Redmi headphones.

• 🚫 Wrong size of bottles, too small bottles cause discomfort, too large ones cause sound insulation. Solution: try all the options in the kit.
• 🔊 Maximum volume. Redmi headphones have powerful speakers, and long listening at full volume can damage your hearing. Solution: use no more than that. 60-70% volume.
• 🔋 Ignoring the case charge. Many people forget that the case TWS-Solution: Watch the indicator on the case (flashing red - charging required).
• 🎧 Wearing only one headphone. In TrueWireless Stereo models (like Redmi Buds 4 Pro), the sound can be distorted when using one headphone. Solution: use both earphones or activate mono mode in the settings.

Another common problem is the noise of calls, which is caused by the microphone being in the wrong position.

• 🎤 The microphone should be at the level of the mouth (not above the chin and not below the collarbone).
• 🔇 In windy weather, cover the microphone with your hand or use the noise reduction function in the Xiaomi Wear app.

FAQ: Frequent questions about Xiaomi Redmi headphones