How to set an alarm clock on Xiaomi Mi Band 4: all ways + hidden features

Xiaomi Mi Band 4 is one of the most popular fitness bracelets, but its capabilities are often left untapped, and many users do not even suspect that the device can not only count steps, but also wake the owner with a vibration at a given time, and you can do this both through your smartphone and directly from the bracelet screen without unnecessary manipulation.

In this article, we'll look at all the ways you can set your alarm clocks to Mi Band 4, including rare things like repeating signals or waking up smartly in light sleep, and why your alarm clock sometimes doesn't work, and how to fix it, and if you've just bought a wristband or used it for a long time, but you've been on the phone, this is the guide for you.

How to set the alarm clock on Mi Band 4: which one to choose?

The Xiaomi Mi Band 4 has two main ways to control alarm clocks: through the Mi Fit app (or its Zepp Life equivalent for newer versions) and directly from the wristband screen.

• 📱 Through the application: convenient to set up repeated alarm clocks, edit the time to the minute and synchronize with the calendar of the smartphone.
• ⌚ Through the bracelet: faster to set a single alarm if the phone is discharged or it is not at hand.

It is important to understand that alarm clocks created on the wristband are not synchronized with the application – they exist only in the memory of the device, but the signals added through Mi Fit will be duplicated on the phone (if the corresponding option is enabled).

Another caveat: Mi Band 4 supports up to 10 active alarm clocks at a time (including repetitive alarm clocks), and if the limit is exhausted, you'll have to remove the old ones before adding new ones, and now we'll go through each method in detail.

Method 1: Set the alarm clock with the Mi Fit (Zepp Life) app

This is the most flexible way to create an alarm clock with a repeat on the days of the week, select a melody (vibration pattern) and even tie it to the sleep phases.

1. Open the Mi Fit app (or Zepp Life for firmware after 2022).
2. Go to the Profile section → Mi Smart Band 4 → Alarm clocks.
3. Click Add an alarm clock (the + icon in the upper right corner).
4. Set a time, select repetition days (for example, weekdays only) and the type of vibration.
5. Save the changes – the alarm clock is automatically synchronized with the bracelet.

Zepp Life also has a Smart Wake-up option that will wake you up in your optimal sleep phase 30 minutes before your set time.

Profile → Mi Band 4 → Alarm clocks → [select alarm clock] → Enable "Smart wake-up"

This function only works when sleep monitoring is enabled (check in the bracelet settings). If the option is inactive, update the device's firmware through the app.

Synchronize the bracelet with the phone over Bluetooth

Update the Mi Fit/Zepp Life app to the latest version

Check the charge level of the Mi Band 4 (minimum 20%)

Enable notifications for the app in your phone settings-->

Method 2: Create an alarm clock directly on the bracelet

If you do not have a smartphone at hand or need to urgently set an alarm, you can do it directly on the Mi Band 4. The interface of the bracelet is not as visual as in the application, but you can cope with the task in 30 seconds:

1. Swipe your finger up the bracelet screen to open the menu.
2. Select the item More → Alarms (bell icon).
3. Click Add and set the time with swipes up/down.
4. Confirm the choice with a button on the screen - the alarm is activated.

Note that you can't set a repeating alarm on the wristband, just a one-time alarm, and there's no smart wake-up option, but it works even without a phone connection.

💡

If the bracelet screen doesn't respond to swipes, try moistening your finger with water or using a stylus.The Mi Band 4 sensor sometimes doesn't recognize dry fingers well.

To remove or turn off the alarm on the bracelet:

1. Go to the alarm clock in the device menu.
2. Select the right alarm clock and hold it for 2 seconds.
3. There will be an option to delete (basket icon).

Comparison table: Mi Fit vs. bracelet setting

From the table, it can be seen that for full use it is better to combine both methods: the main alarm clocks are set through the application, and one-time ones are set right on the bracelet.

Why is the alarm clock on Mi Band 4 not working? 5 reasons and solutions

One of the most common problems is that the bracelet doesn't vibrate at a set time, and here are the typical reasons and ways to fix them:

• 🔋 Battery discharge: If the charge is below 10%, the device turns off "non-critical" functions, including alarm clocks.Solution: charge the bracelet to 100% and check the energy saving settings in the Mi Fit → Device profile → Energy conservation.
• 📵 No phone connection: if the alarm was created through the app but the bracelet didn't sync, the signal may not reach.Solution: manually update the data in Mi Fit (pull the screen down).
• 🛌 Do Not Disturb: If it is enabled DND (In bracelet or phone settings, the vibration is blocked. Solution: check the settings. → Don't disturb the bracelet.
• 🔄 Firmware failure: after software updates, settings sometimes get lost. Solution: reset the bracelet to factory settings (Settings) → Reset) and set the alarm clocks again.
• ⏰ Phone alarms conflict: If the smartphone and bracelet are set to the same time, the overlay of signals may occur. Solution: shift the time by 1-2 minutes.

A critical feature of the Mi Band 4 is that alarm clocks only work when you wear the bracelet. If you take it off at night (for example, to charge), the vibration will not turn on. This is a common cause of missed awakenings.

Hidden Alarms Functions on Mi Band 4: Life Hacks for Power Users

Few people know, but Mi Band 4 has some Easter eggs and hidden alarm clock features.

• 🎵 Vibration Customization: In Zepp Life, you can choose from three vibration patterns (Short, Long, Double.
• 🌙 Sleep phase binding: If you turn on Smart Awakening, the bracelet will analyze your sleep overnight and wake you up at the optimal time (30 minutes before the set time), which reduces feelings of "breakdown" in the morning.
• 🔄 Fast shutdown: if the alarm goes off, but you want to sleep another 5-10 minutes, you can shake the bracelet - the vibration will turn off, and after 5 minutes it will repeat (does not work on all firmwares).
• 📅 Sync with Google Calendar: in Mi Fit you can connect a Google account and automatically create alarms based on calendar events (Profile) → Settings → Synchronizing the calendar).

Another little-known trick is that if you set your alarm clock at 00:00, the bracelet will vibrate at midnight, which is convenient for reminders of taking medications or changing the day (for example, for those who work night shifts).

💡

For maximum efficiency, combine alarm clocks on your bracelet and phone: set the main time on the Mi Band 4, and on your smartphone - a backup signal in 5-10 minutes.

Frequent errors in setting alarm clocks and how to avoid them

Even experienced users sometimes make mistakes that make alarm clocks work incorrectly.

⚠️ Note: If you are using Mi Band 4 from your iPhone, make sure that your iOS settings for the Mi Fit app enable Notifications and Bluetooth.

• ⏱️ Time mismatch: If the bracelet and phone have different times (for example, due to manual time zone change), the alarm clocks will not work correctly. Solution: turn on automatic time synchronization in the bracelet settings.
• 🔕 Notifications disabled: In some firmware, alarms are equated to notifications. If they're turned off globally, the vibration won't work. Solution: check Settings. → Notifications → Alarm clocks.
• 🔋 Energy saving mode: In charge saving mode, the bracelet turns off vibration for all notifications, including alarm clocks. Solution: turn off mode or add alarm clocks in exceptions.

Another common problem is that users forget that the Mi Band 4 only supports disposable alarms when set up via the bracelet. If you need a repeat reminder (for example, every Monday), be sure to use the app.

⚠️ Warning: After resetting the bracelet to factory settings, all alarm clocks created on the device (not through the app) will be removed. To avoid loss, sync them with Mi Fit in advance.

FAQ: Answers to popular alarm clock questions on Mi Band 4