How to connect the remote to the TV Xiaomi: step-by-step instructions for all models

Why Xiaomi TV Remote is Not Connecting – and How to Fix It

Did you just unpack the new Xiaomi Mi TV 4A or Redmi Smart TV X55, but the remote doesn't work? Or did the old remote stop responding after the firmware update? The problem is familiar to many owners of the brand's smart TVs. 90% of the time, it's not the fault, but the wrong pairing procedure or the failure in the Bluetooth settings.

In this article, you will find the most relevant ways to connect to all types of remotes: original (with the Mi button), universal (for example, from Xiaomi Mi Remote), as well as remotes from other brands. We will also analyze the hidden settings that help restore communication if standard methods did not work. And for Xiaomi TV A Pro 2023+ models, a separate section has been added to take into account their new pairing protocol.

Before you start, make sure: 1) The TV has the latest firmware installed (check Settings → About TV → Software Update). 2 The remote is charged (for models with a battery) or it has working batteries (for remotes on AAA). 3 The distance between the remote and the TV does not exceed 3 meters - for the first connections this is critical.

Method 1: Standard connection of the original remote

The original Xiaomi remotes (with the Mi logo on the top panel) are connected via Bluetooth Low Energy (BLE) and the pairing process starts automatically when the TV is turned on for the first time, but it can be repeated manually.

Instructions for Mi models TV 4/4A/4S/4C/4X/5/5A/5X, Redmi Smart TV X50/X55/X65 Xiaomi TV A/A Pro:

1. Turn on the TV with the power button on the case (if the remote does not respond).
2. Press and hold the Menu (or Home) + OK buttons on the remote simultaneously for 5-7 seconds until the indicator flashes red and green (a unique signal for 2022+ models).
3. On the TV screen, a notification will appear "New remote is detected. Connect?" - confirm the choice.
4. Wait for the message "Remote connected" (usually takes 10-20 seconds).

If the remote does not work after these actions, check:

• 🔋 Battery charge: on remotes with a battery (for example, Xiaomi Mi) TV Remote Pro) the charging indicator should be green when connected to the USB.
• 📶 Interference: remove other Bluetooth devices from the TV (earphones, speakers, smartphones).
• 🔄 Reboot: Turn off the TV for 30 seconds, then repeat the procedure.

💡

On the remotes Xiaomi Mi TV Remote 2021+ there is a hidden reset button – it can be activated by a paper clip through the hole on the back panel (near the indicator).

Method 2: Connect via the settings menu (for all remotes)

If automatic pairing doesn’t work, use manual mode via the system menu, which is also suitable for universal remotes (such as Xiaomi Mi Remote or BroadLink RM4 Pro) if they support the Xiaomi TV protocol.

Step-by-step:

1. Open Settings → Devices → Remote and accessories.
2. Select "Add remote" (or "Bluetooth devices" on old firmware).
3. Press Search and hold the Menu + OK buttons on the remote until it appears in the list.
4. Confirm the connection on the TV screen.

Universal remotes may require manual selection of a TV model, such as the Mi Remote app on a smartphone:

1. Open the application and click "Add device".
2. Select the category "TV" → brand "Xiaomi".
3. Follow the instructions on the screen, holding the remote at a distance of 1-2 meters from the TV.

Make sure the TV is on and unlocked |

Check the battery charge of the remote |

Remove old coupled devices in Settings → Bluetooth|

Shut down. VPN/Proxy on TV (interfering with device search)-->

Method 3: Resetting remote settings and re-pairing

If the remote was previously connected but is now out of order, its settings may have gone wrong, and a full reset will help.

For the original Xiaomi remotes:

1. Turn off the TV.
2. Remove the batteries from the remote for 30 seconds.
3. Insert the batteries back and hold the Menu + Back for 10 seconds – the indicator should flash three times.
4. Turn on the TV and repeat the standard connection (see Method 1).

For battery-powered remotes (such as Mi TV Remote Pro):

• 🔌 Connect the remote to charging for 5 minutes, even if the indicator does not burn.
• 🔄 Press and hold the Power. + Home 15 seconds for forced reset.
• 📱 If the remote supports connection to the smartphone (via Mi Home), update its firmware before re-pairing.

Compatibility table of remotes and models Xiaomi TV

Not all remotes work with any Xiaomi TVs. Below is the up-to-date compatibility table for 2026. If your model isn't on the list, check the support on the official website.

Note: For models Xiaomi TV A Pro 2026 requires firmware not lower than MIUI TV 3.0.15. Check the version in Settings → About TV.

💡

Xiaomi TV A Pro uses the new MiTV Link 2.0 pairing protocol, so older remotes (until 2022) may not connect, in which case you need an original remote from the kit or a firmware update.

Problem Solving: The remote is connected but not working

Situation: The remote is successfully paired, but the buttons are not responding or are late, and here are the proven troubleshooting methods:

⚠️ Warning: If the remote is only working close to (less than 1 meter), the problem is in the Bluetooth antenna of the TV.

Reset TV settings (without data loss):

• 🔧 Go to Settings. → System system → Resetting and remediation.
• 🔄 Select Reset Network Settings (does not delete applications, but resets) Bluetooth/Wi-Fi).
• 🔁 After restarting, repeat the interface of the remote.

2. Update of the remote firmware (for models with a battery):

• 📱 Install the Mi Home app on your smartphone.
• 🔗 Connect the remote to the application via Bluetooth.
• 🔼 If an update is available, follow the instructions on the screen.

3. check conflicts with other devices:

• 🎧 Turn off all Bluetooth headsets, gamepads and speakers from the TV.
• 📡 Switch Wi-Fi on TV to 2.4GHz channel (5GHz can cause interference).
• 🔌 Turn off other Xiaomi smart devices (lamps, sockets) from the outlet).

Connecting a third-party remote (Logitech, BroadLink, Samsung)

If you have a universal remote from another brand (like Logitech Harmony or BroadLink RM4 Pro), it can be configured to manage Xiaomi TV, but with limitations:

For IR-remotes (infrared):

• 📺 Make sure the TV supports you. IR-management (check availability) IR-front-mount).
• 🔍 In the remote settings, select the code for Xiaomi or Android TV.
• 🎯 Point the remote to the receiver (usually located to the right or left of the screen).

For Bluetooth remotes:

• 🔗 Connect the remote via Settings → Devices → Bluetooth.
• 🔧 You may need to manually link buttons through the remote manufacturer’s app.
• ⚠️ Voice controls (such as Google Assistant) may not work.

⚠️ Note: Remotes from Samsung or LG Often incompatible with Xiaomi TV The exception is the protocol-based model. CEC (HDMI-Control, but they only control basic functions (on, volume, channel switching).

Frequent Mistakes and How to Avoid Them

User experience shows that most of the problems with the remote connection arise from incorrect actions during the pairing stage.

• ❌ Use of non-original batteries: cheap batteries may not provide enough current for a Bluetooth module. Use Duracell or Energizer.
• ❌ Interrupting the pairing process: if you press any remote button before the connection is complete, the process will reset.
• ❌ Ignoring updates: TV firmware older than 2021 may not support new remotes.
• ❌ Connection through USB-Hub: Some remotes (e.g. Mi) TV Remote Pro requires direct connection to the USB-charge-port.

If you encounter an error "Can't connect the device", try:

1. Reboot the TV (Settings → Reboot).
2. Remove the remote from the list of associated devices and repeat the procedure.
3. Reset your network settings (Settings → Network → Reset).

FAQ: Answers to Frequent Questions