Xiaomi Poco X3 NFC: how to use a smartphone 100%

Xiaomi Poco X3 NFC is one of the most popular mid-range smartphones, still relevant today thanks to its powerful hardware, NFC support and long upgrade life. But even experienced users are often unaware of the hidden capabilities of this device. This article will not just list the basic features, but will reveal the expert ways to use the Poco X3 NFC – from fine-tuning performance to the non-obvious MIUI chips that save time and battery.

We'll learn how to properly activate NFC for contactless payments, optimize your 120-hertz screen, extend your 5160 mAh battery life, and even use your smartphone as a gaming console, and answer questions that often go unaddressed: why the Poco X3 NFC warms up when charging, how to turn on stereo speakers for music, and whether you can unlock the bootloader without losing data. If you just bought this device or want to make the most of it, read on.

First Enablement and Basic Setup of Poco X3 NFC

After unpacking the Poco X3 NFC, many users rush to use immediately, skipping important initial setup steps, which can lead to performance, autonomy, or even safety issues.

• 🔄 Update. MIUI Up to the latest version through Settings → The phone. → Update the system. Even if the smartphone is new, it might be running outdated firmware from the factory.
• 🔒 Set up unlock: a fingerprint (scanner on the side button) works faster than facial recognition, especially in the dark.
• ☁️ Sign in to Xiaomi account – this will open access to cloud backup, themes and features like Find Device (search for a phone when lost).
• 📱 Activate the mode. POCO Launcher (if you don't like the standard one) MIUI) through settings → Annexes → Launcher.

Pay special attention to setting up access rights for applications. In MIUI, many resolutions (geolocation, microphone, camera) are disabled by default for new programs. To avoid problems with the work of messengers or maps, go to Settings → Privacy → Application permissions and configure them manually.

⚠️ Note: If you are buying Poco X3 NFC hand, be sure to reset to factory settings (Settings) → Additionally. → Previous owner could have left a Xiaomi account tied, which will block access to some features.

NFC in Poco X3 NFC: how to set up contactless payments and more

The main advantage of the NFC model in the name is that it supports contactless technology, but many users are facing problems: payments don't pass, the subway doesn't read the card, and the phone can't see other devices, and we'll figure out how to properly activate and use NFC.

The first thing to do is add a bank card to Google Pay or Mi Pay (depending on the region).

1. Open the Google Pay app (or Mi Pay for China/India).
2. Click “Add card” and scan it or enter the data manually.
3. Confirm the link via SMS from the bank.
4. Install Google Pay as the default contactless payment app in Settings → Connected Devices → NFC → Default Payments.

If payments are not working, check:

• 📶 Phone region: In some countries (e.g. India) Google Pay does not support NFC-Payments: Replace the region with supported (US, Europe) in Google account settings.
• 🔋 Battery charge: at a level below 5% NFC It can be turned off to save energy.
• 🛠️ Updates MIUI: In the old versions of the firmware were bugs with the operation of the module NFC. Update to the latest version.

💡

If you use NFC frequently for payments, add the module on/off shortcut to the notification bar. To do this, swipe down from the top edge of the screen, click Edit, and drag the NFC icon to the active area.

120Hz vs 60Hz: How to set up screen for maximum FPS and battery savings

Poco X3 NFC 120-hertz IPS-It's a screen, but by default, the refresh rate can automatically drop to 60 Hz. It's designed to save charge, but not everyone likes the twitch interface when switching modes. Here's how to manually control the frequency:

Go to Settings → Display → Screen refresh rate and select one of the options:

• 🔄 Auto – the system chooses between 60 Hz and 120 Hz depending on the task (saves battery, but can cause twitching).
• 🎮 120 Hz is the maximum smoothness, but the battery consumption increases by ~15-20%.
• 🔋 60Hz is the best option for autonomy, but the interface will be less responsive.

For gamers, there is a separate setting: in Settings → Special Features → Gamer Mode, you can enable 120Hz fixation for specific games. This is useful in shooters or racing simulators, where reaction is important.

⚠️ Note: When using 120 Hz for a long time (for example, when watching a video), the smartphone may overheat.°C, MIUI automatically reduce the frequency to 60 Hz.

Enable adaptive brightness |Select 120Hz mode for games |Disable auto-regulation of frequency when watching video |Tune the color profile to "Saturated" for better contrast-->

5160 mAh battery: how to extend the life of the battery and speed up charging

One of the key advantages of the Poco X3 NFC is a capacious 5160 mAh battery. But even it can discharge too quickly if you do not optimize the settings. Here are 5 main charge eaters and how to deal with them:

1. 120Hz in the background: As mentioned earlier, the high refresh rate of the screen increases the consumption. Turn it off when not playing.
2. Application background activity: MIUI aggressively optimizes background processes, but some apps (like Telegram) may wake up too often. Limit them to Settings → Battery → Battery Optimization.
3. 5G and LTE+: If your operator supports you 5G, But the coverage is unstable, and the phone will be constantly switching between networks, wasting energy. 4G In Settings → SIM-maps and mobile networks → Preferred type of network.
4. Vibration and tactile feedback: Turn off vibrations when typing and in system notifications – this will save up to 5% of charge per day.
5. Geolocation and Google Services: Even if you don’t use maps, some apps (like weather) constantly request location. Turn off geolocation for unnecessary programs in Settings → Privacy → Permissions → Geodata.

As for charging, the Poco X3 NFC supports fast 33W charging, but only with the original power supply. If you use a third-party adapter, the speed can drop to 18W or lower.

• ⚡ Use a cable from the kit (it is thicker than standard and supports high currents).
• 🔌 Charge your phone in flight mode – this will reduce the time for the 10-15%.
• 🌡️ Avoid charging at temperatures below 10°C or higher than 35°C - This damages the battery.

64 MP camera: secrets of shooting and processing photos

The Poco X3 NFC's main camera has a 64MP resolution, but by default, the images are saved to 16MP (with 4-in-1 pixel binning). This is done to improve quality in low light conditions, but in good light you can turn on full resolution for detail.

Open the Camera app, go to Settings (cogs) → Resolution and select 64 MP. Note that these photos will weigh ~20-30 MB each, so save up memory.

• 🎥 4K@30fps — maximum quality, but without stabilization.
• 🎞️ 1080p@60fps — Better balance between smoothness and detail.
• 🌃 Night mode – works only for photos, videos in the dark are shot with noises.

To improve the photo directly on your phone, use the built-in Gallery editor:

1. Open the photo and click "Edit".
2. In the "AI" section, automatic improvements are available: noise elimination, sharpening and lighting correction.
3. For manual adjustment, use Exposure, Contrast and Saturation sliders.

⚠️ Note: When shooting in 64 MP is turned off HDR If you're looking for dynamic range over detail, stay at 16 MP.

💡

For the best indoor photos, use the Document mode in the camera app – it turns off the noise-making and saves more detail.

Performance and games: how to overclock the Snapdragon 732G

Poco X3 NFC It is equipped with Qualcomm Snapdragon processor 732G, which does a great job with most games, but over time can "slow down" due to background activity MIUI. Here's how to get back to the old days. FPS:

First, check if the phone is overheating, and if the temperature is above 45°C, MIUI automatically reduces the performance.

• 🧊 Use a cooling case or play in a cool room.
• 🔄 Close all background apps before launching the game (swipe up in the menu of recent apps).
• 🎮 Turn on the gamer mode in the notification curtain – this will turn off notifications and optimize resources.

For advanced users, there is a way to unlock hidden CPU settings:

1. Turn on Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Back to Settings → Additionally. → For developers.
3. Find the Background Limitation option and set “No Limits” for your game.
4. Turn off window animation and transitions – this will speed up the system’s response.

💡

If you see lags in the game, try to turn off VSync in the graphics settings. This can increase the FPS, but you will see a screen tearing.

Stereo speakers and sound: how to turn surround sound

The Poco X3 NFC has dual speakers (top and bottom), but by default they work in mono mode to save energy.

1. Open the sound settings through the notification curtain (the gear icon next to the volume slider).
2. Activate the "Stere Speakers" option.
3. For the best bass, turn on the Low Frequency Amplifier (available only in headphones).

If the sound is too quiet or distorted, check:

• 🔊 Clean speakers: dust or dirt can block the bottom speaker (located next to the connector) USB-C).
• 🎧 Settings of uniformity: in Settings → Sound. → Choose Preset Bass or Rock for Music.
• 🔕 Do Not Disturb Mode: It can turn off media sound. Check in Settings → Sound. → Don't disturb.

To improve the sound in the headphones, use LDAC-codecs (if your headphones support them:

1. Put your headphones on Bluetooth.
2. Go to Settings → Connected Devices → Bluetooth Settings → Sound Quality.
3. Select "LDAC" (you will need to reconnect the headphones).

FAQ: answers to frequent questions about the Poco X3 NFC