How to start wet cleaning on a vacuum cleaner Xiaomi Mi: a complete guide with expert advice

Xiaomi Mi wet vacuum cleaners have been a breakthrough for those who appreciate cleanliness effortlessly. But many users face difficulties in their first run: the module is not recognized, water is not supplied, the surface is divorced. This article will help you understand all the nuances from vacuum cleaner preparation to the subtleties of cleaning different coatings.

We're not just going to re-write the instructions out of the box, but we're going to reveal hidden settings that the manufacturer doesn't advertise, explain why sometimes the system doesn't work, and share life hacks for the perfect result. For example, did you know that Deep Clean mode on Mi Robot Vacuum-Mop 2 Pro models only activates at water temperatures above 40°C?

At the end of the article, you'll find answers to frequent questions, an accessory compatibility table, and a checklist for quick troubleshooting, even if your vacuum cleaner has been in the corner for a couple of years, you can get it back to life after reading it!

Which Xiaomi Mi models support wet cleaning?

Not all Xiaomi robot vacuum cleaners can wash floors, and wet cleaning is a relatively recent feature that depends on the model, and here are the key series to look out for:

• 🤖 Mi Robot Vacuum-Mop (first generation) - Basic model with a water capacity of 200 ml. Suitable for laminate and tile, but does not cope with severe pollution.
• 🌟 Mi Robot Vacuum-Mop 2/2 Pro/2 Ultra - improved versions with electronic water control, hot water support (in Pro version) and automatic mop lifting.
• 💧 Mi Robot Vacuum-Mop P - budget version with mechanical humidity regulator. Requires manual adjustment before each cleaning.
• 🔋 Mi Robot Vacuum-Mop 2 Lite is a simplified version without a laser rangefinder, but with wet cleaning support.

To determine exactly if your model supports the function, check:

1. The inscription Mop or Vacuum-Mop in the model name (on the box or in the documents).
2. A removable water tank in the set.
3. Wet Mopping is on the Mi Home app menu.

If your model doesn't make the list, but you have a water tank in it, it's probably a hybrid model with limited feature support. For example, some versions of the Mi Robot Vacuum 1S can wash floors, but only in manual mode without automation.

Preparation of the vacuum cleaner for the first wet cleaning

Before the first start of the wet cleaning, several critical steps must be taken, neglecting them can lead to leaks, damage to the coating or even failure of the vacuum cleaner.

Start by unpacking and checking the complete set:

• 📦 Removable water tank (usually white or transparent in color).
• 🧽 Washing nozzle (tissue or microfibre).
• 🔧 Fixing elements for fixing the tank (in some models).
• 💧 Bottle with detergent (if provided by the manufacturer).

Follow the step-by-step instructions:

1. Install the detergent: Remove the dry brush (usually with two latches) and replace it with a detergent unit. Make sure it locks with a characteristic click. In the Mi Robot Vacuum-Mop 2 Pro models, the unit rises automatically when you switch to the carpet, check the mobility of the mechanism.
2. Connect the water tank: Fill the tank with only clean water (or a special detergent diluted according to the instructions). The maximum level is up to the MAX mark. In electronically controlled models (for example, Ultra), the tank is equipped with a liquid level sensor - do not exceed the limit, otherwise the vacuum cleaner will refuse to work.
3. Install a napkin: Set the fabric nozzle on the washing block. It should lie flat, without folds. For best results, use the original Xiaomi wipes - they have a special impregnation that prevents divorce.

⚠️ Warning: Never use regular tap water without filtration - salts and impurities can clog water nozzles. In regions with hard water, distilled or boiled water is recommended.

Setting up wet cleaning in the Mi Home app

Without the right setup in the Mi Home app, the vacuum cleaner will either not start cleaning the floors or it will do it inefficiently, and we'll figure out what settings to adjust and where they hide.

First, make sure that:

• 📱 Mi Home app updated to the latest version (check in Google Play or App Store).
• 🔗 The vacuum cleaner is connected to the same Wi-Fi network as your smartphone.
• 🔄 In the vacuum cleaner settings, Wet Mopping mode is enabled (in some models it is disabled by default).

Now, let's move on to the settings:

1. Selection of cleaning mode: In the main vacuum cleaner menu in Mi Home, find the Cleaning Mode section (or Cleaning in Russian version: 🌊 Vacuum and Mop – vacuum and wash at the same time (recommended for most cases). 💦 Mop Only – wet cleaning only (suitable for clean floors). 🌀 Vacuum Only – only dry cleaning (if you need to vacuum the carpets).

Intensity setting

In the Mopping Settings section, select the water supply level:

• 💧 Low - for laminate and parquet (minimum humidity).
• 💧💧 Medium - for tiles and linoleum (recommended mode).
• 💧💧💧 High - for severe contaminants (use carefully!).
• Zoning and no-go zones: In the Map Management section, draw virtual walls or areas where wet cleaning is not needed (such as carpets or wood-coated rooms). To do this: 1. Click on the map icon in the main menu. 2. Select "Add zone" → "No-go zone." 3. Circle the area where washing is not required. 4. Save changes.

The average cleaning time of a room is 20 m2 - about 25-35 minutes. If the vacuum cleaner stopped earlier, check:

• 🔋 Charge level (possibly dead battery).
• 💧 Water level in the tank (could run out).
• 🚫 Obstacles (the vacuum cleaner may have been stuck).