The first launch of Xiaomi Redmi Note 10 Pro: from unpacking to optimal settings

Xiaomi Redmi Note 10 Pro remains one of the most popular mid-range smartphones even years after its release. AMOLED-screen, Snapdragon processor 732G And the 108MP camera -- it's appealing to both beginners and power users, but the first time you run the device, it can raise questions, from basic setup to basic setup. MIUI before unlocking the bootloader for installing custom firmware.

In this article, we will discuss the unique nuances of the first inclusion of the Redmi Note 10 Pro, which are often missed in standard instructions. MIUI 14 may lose the sound in the headphones, how to properly calibrate the battery taking into account the features of the 5020 mAh battery, and why you can not ignore the setting of permissions for Google Play at the first start. You will also find a checklist for checking the device for marriage and tips for optimizing performance.

1. Unpacking and external inspection: what to check before switching on

Before you press the power button, make sure the device is free of physical defects.The Redmi Note 10 Pro comes in a box with a minimal kit: the smartphone itself, the cable USB Type-C, power supply 33W (in some regions may not be available) and a paper clip for the tray SIM-Not having film on the screen is the norm for most games, but that doesn't mean that the display is unprotected.

The external examination shall include:

• 🔍 Screen: Check for scratches, broken pixels (turn on the device in Fastboot mode, keeping Volume down) + Power supply and evenness of the lights, and especially the areas around the front camera and the edges, which are the most common defects. OLED-matrix.
• 📶 antenna lines: there should be no gaps or irregularities on the back panel. Poor antenna contact can lead to problems with the antennas. 5G (If your model supports Wi-Fi 6.
• 🔋 Connectors: insert the cable into the Type-C port, it should come in tightly, without backlash. Check the speakers for dust or factory debris (blow in short jerks without sharp objects!).

⚠️ Note: If the box does not have a holographic sticker with a serial number or it is damaged, this may indicate unofficial imports (CN ROM), which does not support Google services.

Also note the serial number (located on the box and under the tray). SIM-It must match in both places. If not, you are either a fake or a device after repair (which is not always bad, but requires a history check through the back door). IMEI at imei.info).

2.First Incorporation: Step-by-step adjustment MIUI

Once you press the power button, the Redmi Note 10 Pro will start in initial settings, and it's important to take your time here, because many of the settings you've set at this point will have to be manually changed through hidden menus.

1. Language and region choice: Install Russian (Russia) or English (United States). Region affects the services available (for example, in India, Mi Pay will be pre-installed by default, which does not work in Russia).
2. Connection: Use Wi-Fi, not mobile Internet, to save traffic and avoid errors when downloading updates. If the network is not on, check 5GHz support in router settings (some Redmi models don't work well with channels above 149).
3. Signing in to your Mi Account: Without it, you won’t be able to use the cloud backup, theme and some camera features. If you don’t have an account, register it in advance on account.xiaomi.com, so you won’t be blocked due to suspicious activity.
4. Google Services Setup: Many people make the mistake of skipping the contact and email sync step. If you use Gmail, be sure to activate backup in Settings → Google → Backup.

After the basic configuration, the system will offer to update MIUI. There is a caveat: if the firmware version is older MIUI 13, upgrade in stages (first to 13, then to 14) Jumping through multiple versions can cause disruptions NFC fingerprinter.

Check the firmware version in Settings → The phone.

Connect to charging (minimum 50%)

Disable VPN and Firewall

Make a backup to Settings → Additional → Backup

Ensure the stability of Wi-Fi (speed is not lower than 10 Mbit / s)-->

3. Unlock the bootloader: when it is necessary and how to do it safely

By default, the Redmi Note 10 Pro has a bootloader locked, which means you can’t:

• 🔓 Install custom recovery (for example, TWRP).
• 📱 Sweep GLOBAL ROM, If you have a Chinese version.
• ⚡ Use Magisk for root rights.
• 🔄 Reverse to the old version MIUI via Fastboot.

Officially unlocking requires a Mi Account to be linked to the device and waiting 7 days (if the account is new) or 360 hours (for old low-activity accounts).

1. Activate. OEM Unlock in Settings → The phone. → Version. MIUI (Tap 7 times, then go back to Settings → Additionally. → For developers).
2. Connect your phone to your PC, install the Mi Unlock Tool and log in.
3. Transfer the device to Fastboot (Loudness down) + Power) and connect to the PC.
4. In the program, press Unlock and wait until it is completed (it may be necessary to try again after 72 hours).

⚠️ Note: After unlocking the bootloader, all data, including files in internal memory, will be reset. Some banking applications (for example, Sberbank Online) may stop working due to the SafetyNet trigger.

If you need to unlock for firmware GLOBAL ROM, Check the current version through the team:

fastboot getvar product

If the answer is eea or global, your firmware is global. If cn, you need firmware through the Mi Flash Tool with a clean all option.

Battery Optimization: How to Extend the Life of a 5020mAh Battery

The Redmi Note 10 Pro is equipped with a 5020 mAh battery, but its actual autonomy depends on the settings. MIUI aggressively optimizing background processes, which can lead to:

• ⏳ Delays in notification delivery (especially for Telegram and WhatsApp).
• 🔄 Reboots at low charge (below 15%).
• 📉 Rapid wear of the battery due to constant microcharges.

To avoid these problems, follow the following steps:

Calibration of the battery is another important step.

1. Discharge the phone before automatically shutting down.
2. Charge to 100% without including the device.
3. Turn off the charger, turn on the phone and wait for a full discharge.
4. Repeat the cycle 2-3 times.

This will help the battery controller to determine the level of charge more accurately. After calibration, check the battery status using the code ##4636## (menu Battery Information). If the health value is below 90%, the battery needs to be replaced.

💡

If the phone is very warm when charging, use the original power supply 33W And turn off all background processes. Charge at higher temperatures. 40°C reduces the battery life by 30-40%.

5. Camera setup: How to get the most out of a 108MP module

The main module of the Redmi Note 10 Pro at 108 MP (Samsung) HM2) It can produce impressive images, but only when you set it right. By default, the camera app uses pixel binning (combining 9 pixels into 1), which gives files the size of a file. ~12 MP To shoot in full resolution:

1. Open the Camera app.
2. Tap on. 108M In the top menu (appears only in Photo mode).
3. Make sure it's on. HDR (camera-setting).
4. For night photography, use the manual shutter mode of Night (hold the down button to increase exposure time).

But there are nuances:

• 📸 Photo in 108 MPs take up ~20-30 MB each. Make sure there's enough room on the phone.
• 🔍 When shooting in macro mode (2 MP module) turn off HDR — It spoils the detail.
• 🎥 Video in the video 4K@30fps It's recorded without stabilization. Use it for smooth shooting. 1080p@60fps.

To improve video quality, install GCam (e.g., the version from the BSG Config for the Redmi Note 10 Pro can be downloaded on the Celso Azevedo forum:

1. Import the config via Double Tap to the black field to the right of the downhill button.
2. Turn it on. HDR+ Enhanced in the module settings.
3. For night mode, use Night Sight with shutter speed 3-7 seconds.

⚠️ Attention: After updating to MIUI 14 Some versions of GCam may not run due to changes in the API In this case, set up the cameras. ANX Camera or wait for the configuration update.

6 Problems after the first launch and their solutions

Even when set up correctly, the Redmi Note 10 Pro can be unstable, and here are the most common problems and ways to fix them:

If after the update the phone began to restart, check the error log through the command:

adb logcat > log.txt

Look for lines with crash or bootloop.

• 🔄 Conflict with Magisk (roll back to the old version).
• 📱 Damaged files in the section /data (Helps reset through Recovery).
• 🔋 Faulty battery (check health through engineering menu).

To diagnose hardware problems, use the test:

##6484##

In the Manual Test menu, check all modules (especially the Vibrator, Sensor, and Camera) if any test fails, it's a reason to contact the service.

💡

If after resetting the settings the phone does not turn on (hang on the logo) MI), Try booting into Safe Mode (keep Volume down when you turn it on). If that doesn't work, you'll need firmware through Fastboot.

7. Recommended apps and tweaks for Redmi Note 10 Pro

Standard firmware MIUI It's overloaded with unnecessary services that consume resources. Here's a list of apps and settings to optimize:

• 🚀 System Acceleration: Greenify for hibernation of background applications. SD Maid – clearing cache and duplicate files. SetEdit (requires root) – disabling system applications (com.miui.analytics, com.xiaomi.midrop).
• 📷 Photo: GCam (version from BSG for Snapdragon 732G). Snapseed - processing RAW-Open Camera - an alternative to the standard application.
• 🔋 Battery: AccuBattery – battery health monitoring. Battery Guru – optimizing charging cycles.

For users with an unlocked bootloader, we recommend:

• 🔓 Magisk + Universal SafetyNet Fix – for banking applications. ViPER4Android — sound-improvement. AOD Mod – Always-on Display for Unofficial Firmware.
• 📱 Pixel Experience is a pure Android with support for GCam. LineageOS is a stable alternative MIUI.

If you do not plan to get root rights, but want to remove advertising in the Internet MIUI, Install Blokada (blocker) DNS) or disable personalized advertising in Settings → Confidentiality → Advertising.

💡

To improve the sound quality in headphones, turn on Dirac (Settings) → Sound. → Sound effects → Dirac and choose Dynamic or Balanced Preset.

FAQ: Frequent questions about Xiaomi Redmi Note 10 Pro